PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Analysis of the possibilities to achieve adiabatization process of combustion surrounded by inactive gases in Rapid Compression Machine

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this work non-combustible gases impact on combustion processes studies is performed. Research was performed in a optically accessible rapid compression machine (RCM) under spark ignition engine conditions. The distribution of the swirl charge in the relation to adopted for analysis sequence of gas delivery to the chamber was varied with regard to the main injection. Authors investigate the influence of these sequence on the combustion and the ignition delay of the main injection and the overall combustion characteristics. The aim of this work is the experimental recognition of possibilities of creating combustible mixtures of light hydrocarbon fuels surrounded by non-combustible gases affecting the function of the inhibitor. Specifying the ability of preparation and combustion of mixtures in such systems enables the scientifl analysis of adiabatization of the combustion process of fuel-air mixtures in the operating chambers. Theoretical analysis of the issues indicates possibility of obtaining such a stratification of the charge, that the inactive exhaust gases creating the outer ring surround the combustible mixture inside in such a way as to reduce the amount of heat exchanged between the working medium and the walls of the cylinder.
Czasopismo
Rocznik
Strony
27--31
Opis fizyczny
Bibliogr. 10 poz., il., wykr.
Twórcy
autor
  • Faculty of Machines and Transport in Poznan University of Technology
autor
  • Faculty of Machines and Transport of Poznan University of Technology
Bibliografia
  • [1] ALGER, T. Gasoline Engine Technology for High Efficiency, Southwest Research Institute, San Antonio, 2014.
  • [2] ASAD, U., ZHENG, M. Efficacy of EGR and Boost in Single-Injection Enabled Low Temperature Combustion. SAE International Journal of Engines. 2009, 2(1), 1085-1097.
  • [3] BOROWSKI, P., CIESLIK, W., PIELECHA, I., WISŁOCKI, K. Evaluation of the repeatability of combustion process in rapid compression machine using optical research. XXII International Symposium on Combustion Processes. 22-25.9.2015, Poland.
  • [4] CIEŚLIK, W., PIELECHA, I., BOROWSKI, P., WISŁOCKI, K. Evaluation of repeatability of rapid compression machine under selected conditions. ECM 7th – European Combustion Meeting.3-4.4.2015, Budapest.
  • [5] CIEŚLIK, W., PIELECHA, I., KAPUSTA, Ł. The concept of combustion system with use of recirculated exhaust gas in the spark ignition engine. Combustion Engines. 2015, 162(3), 257-263.
  • [6] DINGELSTADT, R., EWERT, S., WERZ, M., TREMBLE, P. Potential of exhaust gas recirculation in gasoline engines. MTZ. 2014, 75(9).
  • [7] HANJALIĆ, K., POPOVAC, M., HADŽIABDIĆ, M. A robust near-wall elliptic-relaxation eddy-viscosity turbulence model for CFD. International Journal of Heat and Fluid Flow. 2004, 25(6) 1047-1051.
  • [8] PIELECHA, I. Modeling of gasoline fuel spray penetration in SIDI engines. International Journal of Automotive Technology. 2014, 15, 47-55.
  • [9] TUTAK, W. Possibility to reduce knock combustion by EGR in the SI test engine. Journal of KONES Powertrain and Transport. 2011, 18(3).
  • [10] WEI, H., ZHU, T., SHU, G., TAN, L., WANG, Y. Gasoline engine exhaust gas recirculation – a review. Applied Energy. 2012, 99, 534-544.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-693d4373-8b4b-4ee4-8df9-468a2d193f3b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.