Surface modification ofaisi440b stainless steel and its influence on surgical drill bits performance

• Autorzy: Łępicka M. , Grądzka-Dahlke M.

Identyfikatory

DOI

DOI: 10.1515/amm-2016-0232

• Języki publikacji: EN

Abstrakty

EN

The development of modern invasive surgery is highly dependent on the performance of surgical instruments, understood as long-term efficiency arising from high resistance to wear and corrosion. In order to maintain sufficient reliability, surgical cutting instruments are often made of martensitic stainless steels. Nevertheless, the use of ferrous alloys in medical applications is still a concern due to their questionable corrosion and wear resistance. To extend their bioconipatibility, improve stability in variable environmental conditions, improve ease of handling, and maximize their performance, diffusion layers and coatings are applied to the surface. The aim of this work was to evaluate the effect of TiN and diamond-like carbon (DLC) surface modification on the performance of surgical drill bits, that is. wear and corrosion resistance, measured in model and field tests. Based on the findings presented, DLC layers can be recommended as anti-wear and anti-corrosion coatings for surgical drill bits.

Słowa kluczowe

EN

surgical drill bits; corrosion; wear; DLC; TiN

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1417--1424
• Opis fizyczny: Bibliogr. 34 poz., rys., tab., wykr.

Twórcy

autor

Łępicka M.

• Department of Biomedical Engineering and Materials Science, Bialystok University of Technology, Faculty of Mechanical Engineering, Wiejska 45C str., 15-644 Bialystok Poland

autor

Grądzka-Dahlke M.

• Department of Biomedical Engineering and Materials Science, Bialystok University of Technology, Faculty of Mechanical Engineering, Wiejska 45C str., 15-644 Bialystok Poland

Bibliografia

• [1] M. Gierzynska-Dolna, J. Adamus, J. Szyprowski, M. Sobociński, Eng. Biomater 33, 102-106 (2003).
• [2] J. Marciniak, Z. Paszenda, M. Kaczmarek, J. Szewczenko, M. Basiaga, M. Gierzynska-Dolna, P. Lacki, Maint. Probl. 4, 179-186 (2006).
• [3] Z. Paszenda, M. Basiaga, Arch. Metall. 36, 103-109 (2009).
• [4] M. Basiaga, Z. Paszenda, J. Szewczenko, M. Kaczmarek, Acta Bioeng. Biomech. 13, 29-36 (2011).
• [5] G. Augustin, T. Zigman, S. Davila, T. Udilljak, T. Staroveski, D. Breza,. S. Babic, Clin. Biomech. 27, 313-325 (2012).
• [6] R. K. Pandey, S. S. Panda, J. Clin. Orthop. Trauma 4. 15-30 (2013).
• [7] Z. Paszenda. J. Tyrlik-Held. Instrunientariuui chirurgiczne. Wydawnictwo Politechniki Śląskiej. Gliwice (2003) [in Polish].
• [8] M. Biel-Golaska, I. Kalemba, Prace Instytutu Odlewnictwa 48, 29-38 (2008).
• [9] J. Marciniak, Z. Paszenda, W. Walke, M. Basiaga, J. Smolik, Arch. Mater. Sci. Eng. 28, 285-288 (2007).
• [10] M. Azzi, M. P. Ainirault, M. Paquette, J. M. Klemberg-Sapieha, L. Martinu, Surf. Coat. Technol. 204, 3986-3994 (2010).
• [11] L. Wang, J. Su, X. Nie, Surf. Coat. Technol. 205, 1599-1605 (2010).
• [12] B. Subramanian, M. Jayachandran, Mater. Lett. 62,1727-1730 (2008).
• [13] T. Fraczek, M. Olejnik, Surf. Eng. 16, 34-38 (2011).
• [14] R. Hauen, K. Thorwarth, G. Thorwarth, Surf. Coat. Technol. 233, 119-130(2013).
• [15] S. S. Hadinata, M. T. Lee, S. J. Pan. W. T. Tsai, C. Y. Tai, C. F. Shih, Thin Solid Films 259, 412-416 (2013).
• [16] C. A. Love, R. B. Cook, T. J. Harvey, P. A. Dearnley, R. J. Wood, Tribol. Int. 63, 141-150 (2013).
• [17] T. Morita, Y. Hirano, K. Asakura, T. Kiunakiri, M. Ikenaga, C. Kagaya, Mater. Sci. Eng. A- Struct. 558, 349-355 (2012).
• [18] G. Dearnaley, J. H. Arps. Surf. Coat. Technol. 200. 2518-2524 (2005).
• [19] M. Biel-Golaska, Prace instytutu odlewnictwa 48, 5-18 (2008).
• [20] C. He, J. Zhang, J. Wang, G. Ma, D. Zhao, Q. Cai. Appl. Surf. Sci. 276, 667-671 (2013).
• [21] J. Park, D. J. Kim, Y. K. Kim, K. H. Lee, K. H. Lee, H. Lee, Thin Solid Films 435, 102-107 (2003).
• [22] PN-EN 10088 -1:2005 Stainless steels. List of stainless steels.
• [23] M. Gradzka-Dahlke, J. R. Dabrowski, B. Dabrowski, Wear 263. 1023-1029 (2007).
• [24] S. K. Field, M. Jarratt, D. G. Teer, Tribol. Int. 37, 949-956 (2004).
• [25] H. G. Kim, S. H. Ahn, J. G. Kim, S. J. Park, K. R. Lee, Diam Relat. Mater. 14, 35-41 (2005).
• [26] C. Liu, G. Lin, D. Yang, M. Qi, Surf. Coat. Technol. 200, 4011-4016(2006).
• [27] A. Kagiyama, K. Terakado, R. Urao, Surf. Coat. Technol. 169-170, 397-400 (2003).
• [28] E. Alkhateeb, R. Ali, S. Virtanen, N. Popovska, Surf. Coat. Technol. 205, 3006-3011 (2011).
• [29] Y. Li, L. Qu, F. Wang. F, Corros. Sci. 45, 1367-1381 (2003).
• [30] C. Santiuste, M. Rodriguez-Millan, E. Giner, H. Miguelez, H., Compos. Struct. 116. 423-431 (2014).
• [31] S. Li, A. Abdel-Wahab. E. Demirci, V. V Silberschnndt. J. Biomech. 47, 1117-1126 (2014).
• [32] J. Soriano, A. Garay, P. Aristiniuno. P. J. Arrazola, Int. J. Adv. Manuf. Technol. 74, 615-627 (2014).
• [33] F. Karaca. B. Aksakal, M. Kom. Med. Eng. Phys. 33, 1221-1227 (2011).
• [34] C. Ercoli, P. D. Funkenbusch, H. J. Lee, M. E. Moss, G. N. Gräser, Int. J. Oral Maxillofac. Implant. 19. 335-349 (2004).

Uwagi

EN

This scientific work was supported by the Faculty of Mechanical Engineering, Białystok University of Technology, project No MB/WM/10/2016.