Powiadomienia systemowe
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Konferencja
International Conference on Environment and Electrical Engineering EEEIC (16 ; 06-08.06.2016 ; Florence, Italy)
Języki publikacji
Abstrakty
Safety is an essential issue for processes that present high risk for human beings and environment. An acceptable level of risk is obtained both with actions on the process itself (risk reduction) and with the use of special safety systems that switch the process into safe mode when a fault or an abnormal operation mode happens. These safety systems are today based on digital devices that communicate through digital networks. The IEC 61508 series specifies the safety requirements of all the devices that are involved in a safety function, including the communication network. Also electrical generation and distribution systems are processes that may have a significant level of risk, so the criteria stated by the IEC 61508 applies. Starting from this consideration, the paper analyzes the safety requirement for the communication network and compare them with the services of the communication protocol IEC 61850 that represents the most used protocol for automation of electrical plants. The goal of this job is to demonstrate that, from the technical point of view, IEC 61850 can be used for implementing safety-related functions, even if a formal safety certification is still missing.
Słowa kluczowe
Wydawca
Rocznik
Tom
Strony
35--40
Opis fizyczny
Bibliogr. 9 poz., rys., tab.
Twórcy
autor
- Department DITEN University of Genova Genova, Italy
autor
- Department DITEN University of Genova Genova, Italy
autor
- Department DITEN University of Genova Genova, Italy
Bibliografia
- [1] IEC 61508-0 “Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 0: Functional safety and IEC 61508”, 2010.
- [2] IEC 61508-1 “Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 1: General requirements”, 2010.
- [3] IEC 61784 “Industrial communication networks – Profiles – Part 3: Functional safety fieldbuses – General rules and profile definitions”.
- [4] IEC 61158 series “Industrial communication networks – Fieldbus specifications”, 2014.
- [5] IEC 61850-1 “Communication networks and systems for power utility automation – Part 1 Introduction and overview”, 2013.
- [6] IEC 61850-7-2 “Communication networks and systems for power utility automation – Part 7-2: Basic communication structure – Abstract communication service interface (ACSI)”, 2010.
- [7] IEC 61850-8-1 “Communication networks and systems for power utility automation – Part 8-1: Specific communication service mapping (SCSM) – Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3”.
- [8] K-P Brand, M.Ostertag, “Safety related, distributed functions in substations and the standard IEC 61850”, 2003 Bologna Power Tech Conference, June 23th-26th, Bologna, Italy.
- [9] J. Hoyos, M. Dehus and T. X. Brown, "Exploiting the GOOSE Protocol: A Practical Attack on Cyber-infrastructure", Proc. 2012 IEEE Globecom Workshops, pp. 1508-1513.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-6926d1bc-3e1f-4202-82ed-7e7e6486a5ab