Prototype of 3D printed mecanum wheel

• Autorzy: Mateja Krzysztof

Identyfikatory

DOI

10.31648/ts.8415

• Języki publikacji: EN

Abstrakty

EN

This article presents the results of work related to design, analysis and selection of the 3D printed mecanum wheels. Initial CAD model does not include material type of the rollers. Rollers were printed in 4 types of filament: PLA, ABS, PETG, FLEX. Analysis, tests and target destination of use allowed to choose the best material for rollers which will meet the usage requirements. Next step after choose material for roller were assembly of the wheels. Wheels were tested on the simple platform. Assembled 4 wheels (two left and two right) allowed to carry out tests to verify the mobility of the mobile robot and check the adhesion between rollers and ground.

Słowa kluczowe

EN

mecanum wheel; omnidirectional wheel; roller; 3d print; mobile platform

• Wydawca: Wydawnictwo Uniwersytetu Warmińsko-Mazurskiego w Olsztynie
• Czasopismo: Technical Sciences / University of Warmia and Mazury in Olsztyn
• Rocznik: 2023
• Tom: nr 26(1)
• Strony: 33--43
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr.

Twórcy

autor

Mateja Krzysztof

• Department of Fundamentals of Machinery Design Silesian University of Technology, Gliwice

• https://orcid.org/0000-0002-8882-8325

Bibliografia

• Borecki M., Rychlik A., Vrublevskyi O., Olejnik A., Korwin-Pawlowski M.L. 2021. Method of Non-Invasive Determination of wheel Rim Technical Condition using Vibration Measurement and Artificial Neural Network. Measurement, 185: 110050. https://doi.org/10.1016/j.measurement.2021.110050
• Ergen S.C. Sangiovanni-Vincentelli A., Sun X., Tebano R., Alalusi S., Audisio G., Sabatini M. 2009. The Tire as an Intelligent Sensor. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 28(7): 941-955. https://doi.org/10.1109/TCAD.2009.2022879
• Fernandes J., Deus A.M., Reis L., Vaz M.F., Leite M. 2018. Study of the Influence of 3D Printing Parameters on the Mechanical Properties of PLA. Proceedings of the International Conference on Progress in Additive Manufacturing, May, p. 547-552. https://doi.org/10.25341/D4988C
• Gfrerrer A. 2008. Geometry and Kinematics of the Mecanum Wheel. Computer Aided Geometric Design, 25(9): 784-791. https://doi.org/10.1016/j.cagd.2008.07.008
• He C., Wu D., Chen K., Liu F., Fan N. 2019. Analysis of the Mecanum Wheel Arrangement of an Omnidirectional Vehicle. Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science, 233(15): 5329-5340. https://doi.org/10.1177/0954406219843568
• Li Y, Dai S, Zhao L, Yan X, Shi Y. 2019. Topological Design Methods for Mecanum Wheel Configurations of an Omnidirectional Mobile Robot. Symmetry, 11(10): 1268. https://doi.org/10.3390/sym11101268
• Mateja K., Panfil W. 2021. Design of a Motion System for 3D Printed Snakebot. Technical Sciences, 24(1): 57-66. https://doi.org/10.31648/ts.6820
• Taheri H., Qiao B., Ghaeminezhad N. 2015. Kinematic Model of a Four Mecanum Wheeled Mobile Robot. International Journal of Computer Applications, 113(3): 6-9. https://doi.org/10.5120/19804-1586
• Wilson M. 2015. Implementation of Robot Systems. An Introduction to Robotics, Automation, and Successful Systems Integration in Manufacturing. Chapter 3 - Automation System Components. Elsevier, Amsterdam, p. 39-73. https://doi.org/10.1016/B978-0-12-404733-4.00003-5.
• What are the Advantages and Disadvantages of 3D Printing? 2023. TWI, Cambridge. https://www.twi-global.com/technical-knowledge/faqs/what-is-3d-printing/pros-and-cons