The Application of Deep Cryogenic Treatment to Improve the Properties of Nitrided Layers Formed on X153CrMoV12 Steel

• Autorzy: Wach P. , Ciski A. , Babul T. , Kapuścińska A. , Oleszak D.

Identyfikatory

DOI

10.24425/amm.2019.126252

• Języki publikacji: EN

Abstrakty

EN

Deep cryogenic treatment (DCT) is gaining popularity as a treatment used to modify structures obtained during heat or thermo-chemical treatment. The article presents the influence of DCT, carried out during heat treatment before and after gas nitriding processes, on the formation of gas nitrided layers on X153CrMoV12 steel. It was found that the use of DCT between quenching and tempering performed prior to gas nitriding processes, increases the hardness, thickness and wear resistance of the nitrided layers. At the same time, if we apply cryogenic treatment during post-heat treatment of nitrided layers, we also get very high wear resistance and increased thickness of nitrided layers, in comparison with conventional gas nitriding of X153CrMoV12 steel. In this case, DCT significantly increases also the hardness of the core by the transformation of retained austenite and the precipitation of fine carbides of alloying elements.

Słowa kluczowe

EN

gas nitriding; nitride layers; cryogenic treatment; heat treatment; tribology; corrosion resistance; X153CrMoV12 steel

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 1
• Strony: 303--309
• Opis fizyczny: Bibliogr. 18 poz., fot., rys., tab.

Twórcy

autor

Wach P.

• Institute of Precision Mechanics, 3 Duchnicka Str., 01-796 Warsaw, Poland

autor

Ciski A.

• Institute of Precision Mechanics, 3 Duchnicka Str., 01-796 Warsaw, Poland

autor

Babul T.

• Institute of Precision Mechanics, 3 Duchnicka Str., 01-796 Warsaw, Poland

autor

Kapuścińska A.

• Institute of Precision Mechanics, 3 Duchnicka Str., 01-796 Warsaw, Poland

autor

Oleszak D.

• Warsaw University of Technology, Faculty of Materials Science, 141 Woloska Str., 02-507 Warsaw, Poland

Bibliografia

• [1] V. G. Vorobjev, Gosudarstvennoye Izdatelstvo Oboronnoy Promyshlennosti, Moskva, 106 (1954).
• [2] R. F. Barron, 21st Inter-Plant Tool and Gage Conference. Shreveport, LA, USA, ASM Handbook 4, 205 (1982)
• [3] I. Wierszyłłowski, L. Szcześniak, Obróbka Plastyczna Metali 1, 31-36 (2005).
• [4] A. I. Tyshchenko, et al., Materials Science and Engineering A527, 7027-7039 (2010).
• [5] V. Leskovšek, B. Ule, Heat Treatment of Metals 3, 72-76 (2002).
• [6] J. Jeleńkowski, P. Wach, A. Ciski, T. Babul, Materials Science (Inżynieria Materiałowa) 6 (190), 673-676 (2012).
• [7] K. Amini, A. Akhbarizadeh and S. Javadpour, International Journal of Minerals. Metallurgy and Materials 19 (9), 795-798 (2012).
• [8] V. G. Gavriljuk et al., Acta Materialia 61, 1705-1715 (2013).
• [9] A. Molinari, M. Pellizzari et al., Journal of Materials Processing Technology 118, 350-355 (2001).
• [10] J. Y. Huang,Y. T. Zhu, X. Z. Liao, I. J.Beyerlein, M. A. Bourke, T. E. Mitchell, Materials Science and Engineering, A 339, 241-244 (2003).
• [11] B. Podgornik, F. Majdic, V. Leskovsek, J. Vizitnin, Wear 288, 88-93 (2012).
• [12] V. Leskovšek, B. Podgornik, Materials Science and Engineering A 531, 119-129 (2012).
• [13] N. I. Kardonina, A. S. Yurovskikh, A. S. Kolpakov, Metal Science and Heat Treatment 52, 457-467 (2011).
• [14] E. H. Du, Marchie van Voorthuysen, D. O. Borema, N. C. Chechenin, Metallurgical and Materials Transactions A 33A (2002).
• [15] A. Suyazov, M. P. Usikov, B. M. Mogutnov, Fizika Metallov Metallovedenye 42, 755-763 (1976).
• [16] N. DeCristofaro, R. Kaplow, Metall. Trans. A. 8 (1), 35-44 (1977).
• [17] K. H. Jack, Acta Crystallogr. 3, 392-393 (1951).
• [18] F. Meng, K. Tagashira, R. Azuma, H. Sohma, ISIJ International, 34 (2), 205-210 (1994).

Uwagi

EN

1. This research was supported by Eureka Programme (Eureka E!9170 "CRYONITRIDE” Project).

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).