The Ni-Al-Hf Multiphase Diffusion

• Autorzy: Romanowska J. , Wierzba B. , Markowski J. , Zagula-Yavorska M. , Sieniawski J.

Identyfikatory

DOI

10.1515/amm-2016-0100

• Języki publikacji: EN

Abstrakty

EN

The generalized Darken method was applied to simulate the diffusion between γ-Ni| γ’-Ni₃Al and γ’-Ni₃Al|β-NiAl interfaces. The results of calculations were compared with the experimental concentration’s profiles of nickel, aluminum and hafnium in aluminide and hafnium doped aluminide coatings deposited by the CVD and PVD methods on pure nickel. The method deals with the Wagner’s integral diffusion coefficients and thermodynamic data - activities of components. The experimental results agree with the simulated ones.

Słowa kluczowe

EN

NiAlHf system; reactive diffusion; simulation; aluminide coatings

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 587--592
• Opis fizyczny: Bibliogr. 32 poz., rys.

Twórcy

autor

Romanowska J.

• Rzeszów University of Technology, Department of Materials Science, 2 W. Pola Str., 35-959 Rzeszów, Poland

autor

Wierzba B.

• Rzeszów University of Technology, Department of Materials Science, 2 W. Pola Str., 35-959 Rzeszów, Poland

autor

Markowski J.

• Wrocław University of Technology, Faculty of Electronics, 11/17 Z. Janiszewskiego Str., 50-372 Wrocław, Poland

autor

Zagula-Yavorska M.

• Rzeszów University of Technology, Department of Materials Science, 2 W. Pola Str., 35-959 Rzeszów, Poland

autor

Sieniawski J.

• Rzeszów University of Technology, Department of Materials Science, 2 W. Pola Str., 35-959 Rzeszów, Poland

Bibliografia

• [1] G. W. Goward, Materials Science and Technology 2, 194-200 (1986).
• [2] Y. Tamarin, Protective Coatings for Turbine Blades, AMS International, Materials Park, 2002.
• [3] B. A. Pint, J. R. Di Stefano, I. G. Wright, Materials Science and Engineering A 415, 255-263 (2006).
• [4] Loira E. Intermetallics 8, 1339-1345 (2000).
• [5] Loira E. Intermetallics 9, 997-1001 (2001).
• [6] Z. Zhang, J.A. Havnes, G. Wright, B.A. Pint, K.M. Cooley, W.Y. Lee, P.K. Liaw, Metall. Mater. Trans A. Phys. Metall. Mater. Sci. 32, 1727-1741 (2001).
• [7] M. Zagula-Yavorska J. Sieniawski, JMEPEG 23, 918-926 (2014).
• [8] M. Zagula-Yavorska, J. Sieniawski, T. Gancarczyk, Archives of Metallurgy and Materials 57, 503-509 (2012).
• [9] D. Li, H. Guo, D. Wang, T. Zhang, S. Gong, H. Xue, Cyclic Corrosion Science 66, 125-135 (2013).
• [10] G. H. Hwang, J.W. Choi, S. Kang, Z. Metallkd. 96, 269-275 (2005).
• [11] Y. Wang, M. Suneson, G. Sayre, Surf .Coat. Technol. 206, 1218-1228 (2011).
• [12] D. Li, H. Guo, D. Wang, T. Zhang, S. Gong, X.Hubin, Corr. Sci. 66, 125-135 (2013).
• [13] A. H. Heuerw, D. B. Hovis, J. L. Smiałek, B. Gleson, Journal of American Ceramic Society 94, 146-153 (2011).
• [14] B. A. Pint, K. L. More, P. F. Tortoreli, Mater. Sci. Forum 1, 411-418 (2001).
• [15] B. A. Pint, K. L More, I. G. Wright, Oxid. Met. 59, 257-283 (2003).
• [16] J. P. Stacy, Y. Zhang, B. A. Pint, J. A. Haynes, B. T. Hazel, B. A. Nagaraj, Surf. Coat. Technol. 202, 632-636 (2007).
• [17] Y. Wang, M. Suneson, G. Sayre, Surf. Coat. Technol. 206, 1218-1228 (2011).
• [18] J. Romanowska, M. Zagula-Yavorska, J. Sieniawski, Bull. Mater. Sci. 36, 1043-1048 (2013).
• [19] M. Yavorska, J. Sieniawski, M. Zielińska, Archives of Metallurgy and Materials 56, 187-192 (2011).
• [20] C. Wagner, Acta Metallurgica, 17, 99-107 (1969).
• [21] W. Huang, Y.A. Chang, Intermetallics 6, 487-498 (1998).
• [22] C.E. Campbell, Acta Mat. 56, 4277-4290 (2008).
• [23] Y. Ma, A. J. Ardell, Mat. Sci. & Eng. A 516, 259-262 (2008).
• [24] H. Wei, X. Sun, Q. Zheng, G. Hou, H. Guan , Z. Hu, J. Mater. Sci. Technol. 20, 196-198 (2004).
• [25] I. Ansara, N. Dupin, H. L. Lukas , B. Sundman, J. of Alloys and Comp. 247, 20-30 (1997).
• [26] FactSage metal alloy databases (www.csct.polymtl.ca).
• [27] R. E. Hoffman, F. W. Pikus, R. A. Ward, Trans. AIME 206, 483-492 (1956).
• [28] T.S. Lundy, J.F. Murdock, J. Appl. Phys. 33, 1671-1678 (1962).
• [29] J. R. MacEwan, J. U. MacEwan, L. Yaffe, Can. J. Chem. 37, 1623-1628 (1959).
• [30] M. Zagula-Yavorska, J. Morgiel, J. Romanowska, J. Sieniawski, Materials Letters, 139, 50-54 (2015).
• [31] B. Wierzba, J. Romanowska, M. Zagula-Yavorska, J. Markowski, J. Sieniawski, High Temperature Materials and Processes, 5, 495-502 (2015).
• [32] J. Romanowska, M. Zagula-Yavorska, J. Sieniawski, J. Markowski, Open Journal of Metal, 3, 92-99 (2013).