Low friction MoS2(Ti, W) coatings with a Ti interlayer, magnetron sputtered on silumin

• Autorzy: Gawroński J. , Nolbrzak P. , Gumienny G.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The paper presents results of the selected mechanical and tribological properties of the low friction MoS2(Ti,W) coatings with a Ti interlayer deposited by magnetron sputtering method on silumin. Design/methodology/approach: MoS2(Ti,W) coating was investigated by basic tribological tests and it was characterized by linear distribution analysis of selected chemical elements (EDS), nanohardness and Young’s modulus. Findings: It was established that the total thickness of the produced MoS2(Ti, W) coatings with the Ti layer equaled about 2.5 µm. The MoS2(Ti,W) layers produced on a substrate significantly increase its functional properties, by significantly lowering the friction coefficient and wear, thus improving its mechanical properties (hardness and Young’s modulus). Practical implications: Silumins used as a substrates should be previously refined before coating process to reduce the porosity of the material and to obtain maximum adherence of MoS2(Ti,W) layer. Originality/value: The increasingly accurate knowledge on the subject of the relations between the composition, processing, microstructure characteristics and properties has led to the improvement of aluminium properties. However, there is the need to improve of the tribological properties of these alloys what authors obtained.

Słowa kluczowe

EN

friction; silumin; MoS2 coating

PL

tarcie; silumin; powłoka MoS2

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2016
• Tom: Vol. 76, nr 2
• Strony: 55--60
• Opis fizyczny: Bibliogr. 25 poz., rys., tab.

Twórcy

autor

Gawroński J.

• Department of Material Engineering and Production Systems, Faculty of Mechanical Engineering, Lodz University of Technology, ul. Stefanowskiego 1/15, 90-924 Łódź, Poland

autor

Nolbrzak P.

autor

Gumienny G.

• Department of Material Engineering and Production Systems, Faculty of Mechanical Engineering, Lodz University of Technology, ul. Stefanowskiego 1/15, 90-924 Łódź, Poland

Bibliografia

• [1] S. Yang, D.G. Teer, Investigation of sputtered carbon and carbon/chromium multi-layered coating, Surface and Coatings Technology 131 (2000) 412-416.
• [2] P.Eh. Hovsepian, D.B. Lewis, C. Constable, Q. Lou, Y.N. Kok, W.D. Munz, Combined steered cathodic arc/unbalanced magnetron grown C/Cr nanoscale multilayer coatings for tribological applications, Surface and Coatings Technology 174-175 (2003) 762-769.
• [3] Y.N. Kok, P.Eh. Hovsepian, Resistance of nanoscale multilayer C/Cr coatings against environmental attack, Surface and Coatings Technology 201 (2006) 35963605.
• [4] J. Kusiski, M. Rozmus, J.B. Bujak, Investigation of the life-time of drills covered with the anti-wear Cr(C,N) complex coatings deposited by means of ArcPVD technique, Journal of Achievements in Materials and Manufacturing Engineering 33/1 (2009) 86-93.
• [5] L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła, Multilayer and gradient PVD coatings on the sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 33/2 (2008) 170-190.
• [6] L.A. Dobrzański, K. Lukaszkowicz, K. Labisz, Structure of monolayer coatings deposited by PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering 18/1-2 (2008) 423-426.
• [7] W. Kaczorowski, D. Batory, Carbon and titanium based layers for wood based materials, Journal of Achievements in Materials and Manufacturing Engineering 27/2 (2008) 381-386.
• [8] M. Cłapa, D. Batory, Improving adhesion and wear resistance of carbon coatings using Ti:C gradient layers, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 415-418.
• [9] L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła, Cutting ability improvement of coated tool materials, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 41-44.
• [10] S. Mitura, K. Mitura, P. Niedzielski, P. Louda, V. Danilenko, Nanocrystalline diamond, its synthesis, properties and applications, Journal of Achievements in Materials and Manufacturing Engineering 16/1-2 (2006) 9-16.
• [11] L.A. Dobrzański, L. Wosińska, K. Gołombek, J. Mikuła, Structure of multicomponent and gradient PVD coatings deposited on sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 99-102.
• [12] K. Gołombek, J. Mikuła, D. Pakuła, L. Żukowska, L.A. Dobrzański, Sintered tool materials with multicomponent PVD gradient coatings, Journal of Achievements in Materials and Manufacturing Engineering 31/1 (2008) 15-22.
• [13] J. Kopač, M. Sokovič, Cutting properties of the PVD and CVD coatings on the ceramic substrates, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 278-285.
• [14] L.A. Dobrzański, J. Mikuła, Cutting properties of the ceramic tool materials based on Si3N4 and Al2O3, Proceedings of the 12th Scientific International Conference „Achievements in Mechanical and Materials Engineering” AMME’2003, Gliwice, Zakopane, 2003, 221-225.
• [15] J. Gawroński, M. Makówka, W. Pawlak, Ł. Kaczmarek, The structure and mechanical properties of nanocomposite coatings nc-WC/a-C:H, Materials Engineering 5 (2013) 149-152.
• [16] J. Gawroński, Ł. Kaczmarek, W. Pawlak, P. Nolbrzak, The structure and mechanical properties of nanocomposite coatings MoS2 (Ti, W) with interlayers Cr, Materials Engineering 6 (2014) 1-4.
• [17] M. Makówka, W. Pawlak, B. Wendler, J. Sielski, M. Kozanecki, High-temperature low-friction coating on the basis of MoO3 and Ag deposited by magnetron sputtering, Materials Engineering 4 (2011) 553-557.
• [18] M.B. Peterson, S.Z. Lis, S.F. Murray, Wear resisting oxide films for 900°C. Final report, anl/otm/cr-5, US Department of Energy, 1994.
• [19] S.M. Aouadi, B. Luster, P. Kohli, C. Muratore, A. Voevodin, Progress in the development of adaptive nitride-based coatings for high temperatur tribological applications, Surface and Coatings Technology 204 (2009) 962-968.
• [20] M. Makówka, T. Moskalewicz, K. Włodarczyk, B. Wendler, Low-friction and wear-resistant nanocomposite coating type nc-Ci/a-C and nc-Ci/aC:H, Materials Engineering 4 (2010) 1091-1095.
• [21] V. Singh, J.C. Jiang, E.I. Meletis, Cr-diamondlike carbon nanocomposite films: Synthesis, characterization and properties, Thin Solid Films 489 (2005) 150-158.
• [22] G. Gassner, J. Patscheider, P.H. Mayrhofer, S. Sturm, C. Scheu, C. Mitterer, Tribological properties on nanocomposite CrCx/a-C:H, Thin Films Tribology Letters 27 (2007) 97-104.
• [23] Z.Q. Qi, E.I. Meletis, Mechanical and tribological behaviour of nanocomposite multilayred Cr/a-C thin films, Thin Solid Film 479 (2005) 174-181.
• [24] K. Włodarczyk, M. Makówka, P. Nolbrzak, B. Wendler, Low friction and wear resistant nanocomposite nc-MeC/a-C and nc-MeC/a-C:H coatings, Journal of Achievements in Materials and Manufacturing Engineering 37 (2009) 354-360.
• [25] W. Pawlak, R. Atraszkiewicz, P. Nolbrzak, B. Wendler, Low friction coating MoS2 (Ti, W) deposited by magnetron sputtering on the nitrided and HSS Vanadis 23, Materials Engineering 4 (2010) 1157-1161.