Analysis of the quality problems during production process of the stud frame of the stretching station

• Autorzy: Ingaldi M.
• Języki publikacji: EN

Abstrakty

EN

The stud frame of stretching station WSH 400/15 was the main subject of the researches presented in this paper. The aim of the article was the quality analysis of the stud frame during its production process. Construction and scheme of production process of stud frame was presented. Analysis of main areas which generate incompatibilities of researched element was made. Proposals of process improvement with the help of relation diagram and affinity diagram were presented.

Słowa kluczowe

EN

stretching station; relation diagram; affinity diagram

PL

rozciąganie stacji; diagram relacji; schemat powinowactwa

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2014
• Tom: Vol. 2, No. 1
• Strony: 2--5
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Ingaldi M.

• Institute of Production Engineering, Faculty of Management, Czestochowa University of Technology, Armii Krajowej 19B, 42-201 Czestochowa, Poland

Bibliografia

• 1. Miner guide, Vol. 5. Pub. Śląsk, Katowice 1976 (in Polish).
• 2. Installation and operation instruction of the stretching station. WSN – 400/15 (in Polish).
• 3. Ulewicz R., Borkowski S. 2008. Production management. Production systems. Pub. Humanitas, Sosnowiec (in Polish).
• 4. Kardas E. 2012. Quality analysis of pig iron produced in one of Polish steelworks. In: Materials Science Forum, vol. 706-709, p. 2146-2151.
• 5. Borkowski S., Čorejowá T. 2004. Instruments of management problem solving. Pub. Wyższej Szkoły Zarządzania i Marketingu, Sosnowiec (in Polish).
• 6. Konstanciak M., Jagusiak M. 2011. Improvement of the Production of the Hard-Drawn Wire, In: Improvement of Production Processes. Monography. Ed. Stanisław Borkowski, Marek Krynke. Publish. TRIPSOFT, Trnava, p. 60-71.
• 7. Lestyánszka Škůrková K., Šesták M. 2009. The capability of turning process by screws production, In: Production engineering. Novosibirsk State Technical University, p. 49-56.
• 8. Piekara A., Dziuba S.T., Kopeć B. 2012. The use of ishikawa diagram as means of improving the quality of hydraulic nipple. chapter 15. [In:] Toyotarity. Quality and machines operating conditions, Monograph. Ed. S. Borkowski, J. Selejdak, Oficyna Wydawnicza Stowarzyszenia Menedzerów Jakości i Produkcji and Faculty of Logistics, University of Maribor, Celje 2012, p. 162-175.
• 9. Sygut P. 2013. Process of quality improvement in the company producing building materials. Production Engineering Archives, 1/2013, p. 16-18.