PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Analiza sposobów modelowania reaktora trójfazowego ze stałym złożem (TBR) z użyciem metod CFD

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Analysis of modelling of a three-phase fixed bed reactor using CFD procedures
Języki publikacji
PL
Abstrakty
PL
Przedstawiono zagadnienia związane z zastosowaniem modelu wielofazowego Eulera do modelowania reaktora trójfazowego ze złożem stacjonarnym (TBR). Analizując równania modelu wyselekcjonowano parametry, które obliczane są w oparciu o dane dostępne w literaturze, a następnie przeprowadzono analizę czułości modelu na zmianę wartości wyselekcjonowanych parametrów. Przeanalizowano wpływ zmian zależności opisujących siły wzajemnych oddziaływań pomiędzy fazami oraz promieniowej zmiany porowatości wypełnienia na wyniki obliczeń numerycznych.
EN
The paper presents issues connected with the use of Eulerian multiphase model for modelling a three-phase fixed-bed reactor (TBR). Param eters calculated on the basis of available in literature data were selected, and next the analysis of model sensitivity to the change of selected parameters was carried out. The influence of changes of relationships describing the interaction forces between phases and the change of radial porosity of packing on the results of numerical calculations was analyzed.
Rocznik
Tom
Strony
95--96
Opis fizyczny
Bibliogr. 21 poz.
Twórcy
autor
  • Instytut Nauk Technicznych, Wydział Przyrodniczo-Techniczny, Uniwersytet Opolski, Opole
autor
  • Instytut Inżynierii Chemicznej, Polska Akademia Nauk, Gliwice
Bibliografia
  • 1. Al-Dahhan M.H., Khadilkar M.R., Wu Y., Dudukovic M. P., (1998). Prediction of pressure drop and liquid holdup in high-pressure trickle-bed reactors. Ind. Eng. Chem. Res., 37, 793-798. DOI: 10.1021/ie970460+
  • 2. Atta A., Shantanu R., Nigam K.D.P., (2007). Prediction of pressure drop and liquid holdup in trickle bed reactor using relative permeability concept in CFD. Chem. Eng. Sci., 62, 5870-5879. DOI: 10.1016/j.ces.2007.06.008
  • 3. Attou A., Boyer C., Ferschneider G., (1999). Modeling of the hydrodynamics of the cocurrent gas-liquid trickle flow through a trickle-bed reactor. Chem. Eng. Sci., 54, 785-802. DOI: 10.1016/s0009-2509(98)00285-1
  • 4. Dixon A.G., Nijemeisland M., (2001). CFD as a design tool for fixed-bed reactors. Ind. Eng. Chem. Res., 40, 5246-5254. DOI: 10.1021/ie001035a
  • 5. Holub R.A., Dudukovic P.A., Ramachandran A., (1992). A phenomenological model for pressure drop, liquid holdup and flow regime transition in gas-liquid trickle flow. Chem. Eng. Sci., 47, 2343-2348. DOI: 10.1016/0009-2509(92)87058-X
  • 6. Grosser K., Carbonell R.G., Sundaresan S., (1988). Onset of pulsing in two-phase cocurrent downflow through a packed bed. AIChE J., 34, 1850- 1860. DOI: 10.1002/aic.690341111
  • 7. Guardo A., Coussrat M., Larrayoz M.A., Recasens F., Egusqiza E., (2005). Influence of the turbulence model in CFD modelling of wall-to-fluid heat transfer in packed beds. Chem. Eng. Sci., 60, 1733-1742. DOI: 10.1016/j.ces.2004.10.034
  • 8. Gunjal P.R., Ranade V.V., Chaudhari R.V., (2003). Liquid distribution and RTD in trickle bed reactors: Experiments and CFD simulations. Can J. Chem. Eng., 81, 821-830. DOI: 10.1002/cjce.5450810365
  • 9. Hamidipour M., Chen J., Larachi F., (2013). CFD study and experimental validation of trickle bed hydrodynamics under gas, liquid and gas/liquid alternating cyclic operations. Chem. Eng. Sci., 89, 158-170. DOI: 10.1016/j.ces.2012.11.041
  • 10. Hunt M.L., Tien C.L., (1990). Non-Darcian flow, heat and mass transfer in catalytic packed-bed reactors. Chem. Eng. Sci., 45, 55-63. DOI: 10.1016/0009-2509(90)87080-C
  • 11. Iliuta I., Larachi F., Grandjean B.P.A., (1998). Pr essure drop and liquid holdup in trickle flow reactors: improved Ergun constants and slip correlations for the slit model. Ind. Eng. Chem. Res. , 37, 4542-4550. DOI: 10.1021/ie980394r
  • 12. Iliuta I., Larachi F., (1999). The generalized slit model: pressure gradient, liquid holdup & wetting efficiency in gas-liquid trickle flow. Chem. Eng. Sci., 54, 5039-5045. DOI: 10.1016/S0009-2509(99)00228-6
  • 13. Iliuta I., Larachi F., Al-Dahhan M.H., (2000). Double slit model for partially wetted trickle flow hydrodynamics. AIChE J., 46, 597-609. DOI: 10.1002/aic.690460318
  • 14. Janecki D., Burghardt A., Bartelmus G., (2014). Inf luence of the porosity profile and sets of Ergun constants on the main hydrodynamic parameters in the trickle-bed reactors. Chem. Eng. J. , 237, 176-188. DOI: 10.1016/j.cej.2013.09.102
  • 15. Janecki D., Burghardt A., Bartelmus G., (2016). Parametric sensitivity of CFD model concerning the hydrodynamics of trickle-bed reactor (TBR). Chem. Proc. Eng., 37, 97-107. DOI: 10.1515/cpe-2016-0010
  • 16. Jaworski Z., (2005). Numeryczna mechanika płynów w inżynierii chemicznej i procesowej. Akademicka Oficyna Wydawnicza EXIT, Warszawa
  • 17. Jiang Y., Khadilkar M.R., Al-dahhan M.H., Dudukovic M.P., (2002a). CFD of multiphase flow in packed-bed reactors: I. K-fluid modelling issues, AIChE J. , 48, 701-715. DOI: 10.1002/aic.690480406
  • 18. Jiang Y., Khadilkar M.R., Al-dahhan M.H., Dudukovic M.P., (2002b). CFD of multiphase flow in packed-bed reactors: II. Results and applications. AIChE J., 48, 716-730. DOI: 10.1002/aic.690480407
  • 19. Magnico P., (2003). Hydrodynamic and transport properties of packed beds in small tube-to-sphere diameter ratio: pore scale simulation using an Eulerian and a Langrangian approach. Chem. Eng. Sci., 58, 5005-5024. DOI: 10.1016/S0009-2509(03)00282-3
  • 20. Martin H., (1978). Low Peclet number particle to fluid heat and mass transfer in packed beds, Chem. Eng. Sci., 33, 913-919. DOI: 10.1016/0009-2509(78)85181-1
  • 21. Wang Y., Chen J., Larachi F., (2011). Modelling and simulation of trickle-bed reactors using computational fluid dynamics: A state-of-the-art review. Can. J. Chem. Eng., 91, 136-180. DOI: 10.1002/cjce.20702
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-6774c8a2-d707-4d43-aeb3-92b4421f947b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.