Demonstration of First-Principle Data-Driven models using numerical case studies

• Autorzy: Czop P. , Sławik D. , Wszołek G.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The paper consists of two parts. The first part presents and discusses a process of formulation and identification of First-Principle Data-Driven (FPDD) models, while the second part demonstrates numerical examples of identification of FPDD models. Design/methodology/approach: First-Principle (FP) model is formulated using a system of continuous ordinary differential equations capturing usually nonlinear relations among variables of the model. The considering model applies three categories of parameters: geometrical, physical and phenomenological. Geometrical and physical parameters are deduced from construction or operational documentation. The phenomenological parameters are the adjustable ones, which are estimated or adjusted based on their roughly known values, e.g. friction/damping coefficients. Findings: A few phenomenological parameters were successfully estimated from numerically generated data. The error between the true and estimated value of the parameter occurred, however its magnitude is low at level below 2%. Research limitations/implications: Adjusting a model to data is, in most cases, a non-convex optimization problem and the criterion function may have several local minima. This is a case when multiple parameters are simultaneously estimated. Practical implications: FPDD models are an excellent tool for understanding, optimizing, designing, and diagnosing technical systems since they are updatable using operational measurements. This opens application area, for example, for model-based design and early warning diagnostics. Originality/value: First-Principle (FP) models are frequently adjusted by trial-and-error, which can lead to non-optimal results. In order to avoid deficiencies of the trial-and-error approach, a formalized mathematical method using optimization techniques to minimize the error criterion, and find optimal values of tunable model parameters, was proposed and demonstrated in this work.

Słowa kluczowe

EN

First-Principle model; Data Driven model; grey box; servo-hydraulic system

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2011
• Tom: Vol. 45, nr 2
• Strony: 170--177
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Czop P.

• Tenneco Automotive Eastern Europe, Eastern European Engineering Center (EEEC), ul. Bojkowska 59 B, 44-100 Gliwice, Poland

autor

Sławik D.

• Tenneco Automotive Eastern Europe, Eastern European Engineering Center (EEEC), ul. Bojkowska 59 B, 44-100 Gliwice, Poland

autor

Wszołek G.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] Matlab/Simulink package documentation, The Math Works Inc., Natick 1998.
• [2] K. Białas, Synthesis of mechanical systems including passive or active elements reducing of vibrations, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 323-326.
• [3] M. Annarumma, A. Naddeo, M. Pappalardo, Software independence: impact on automotive product development process Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 725-735.
• [4] T. Dzitkowski, A. Dymarek, Design and examining sensitivity of machine driving systems with required frequency spectrum. Journal of Achievements in Materials and Manufacturing Engineering 26/1 (2008) 49-56.
• [5] A. Naddeo, M. Annarumma, M. Pappalardo, N. Cappetti, State of the art of the passive pedestrian safety simulation, Journal of Achievements in Materials and Manufacturing Engineering 30/1 (2008) 51-58.
• [6] S. Żółkiewski, Analysis and modelling of rotational systems with the Modyfit application, Journal of Achievements in Materials and Manufacturing Engineering 30/1 (2008) 59-66
• [7] K. Białas, Comparison of passive and active reduction of vibrations of mechanical systems, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 455-458.
• [8] A. Buchacz, Influence of piezoelectric on characteristics of vibrating mechatronical system, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 229-232.
• [9] A. Buchacz, S. Żółkiewski, Dynamic analysis of the mechanical systems vibrating transversally in transportation, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 331-334.
• [10] J. Świder, G. Wszołek, K. Foit, P. Michalski, S. Jendrysik, Example of the analysis of mechanical system vibrations in GRAFSIM and CATGEN software, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 391-394.
• [11] J. Świder, A. Baier, Aided design, virtual development and testing of modern control systems, Proceedings of the 11th International Scientific Conference “Achievements in Mechanical and Materials Engineering” AMME’2002, Gliwice-Zakopane, 2002, 541-544 (in Polish).
• [12] J. Świder, G. Kost, J. Gorczyński, Process control technology using logic controllers PLC, Proceedings of the 11th International Scientific Conference “Achievements in Mechanical and Materials Engineering” AMME’2002, Gliwice-Zakopane, 2002, 549-552 (in Polish).
• [13] J. Świder., R. Zdanowicz, Application of PLC controller in the systems simulation model Proceedings of the 12th International Scientific Conference “Achievements in Mechanical and Materials Engineering” AMME’2003, Gliwice-Zakopane, 2003, 971-974 (in Polish).
• [14] P. Czop, G. Kost, D. Sławik, G. Wszolek, Demonstration of First-Principle and Data-Driven Models Using Numerical Case Studies: Part A. Journal of Achievements in Materials and Manufacturing Engineering 44/2 (2010)
• [15] T. Bohlin, Practical Grey-box Process Identification: Theory and Applications (Advances in Industrial Control), SpringerVerlag, London, 2006.