A preliminary analysis of spray booth temperature control using PWM modulation with dynamic trigger period

• Autorzy: Jaszczak S. , Nikończuk P.
• Języki publikacji: EN

Abstrakty

EN

The authors present a concept of the temperature control system for a spray booth equipped with a single burner. The control system uses PWM modulation with dynamic trigger time periods. The paper presents the results of temperature control simulations for different conditions of external air temperature as well as the analysis of external air temperature and trigger time period impact on temperature fluctuation amplitudes inside the spray booth. A dynamic trigger period will minimize the number of burner ignitions with acceptable fluctuation amplitudes of temperature. The minimization of the number of burner ignitions will increase the life time of a burner and decrease the fuel consumption used to start a burner.

Słowa kluczowe

EN

spray booth; temperature control; PWM control

• Wydawca: Wydawnictwo PAK
• Czasopismo: Measurement Automation Monitoring
• Rocznik: 2016
• Tom: Vol. 62, No. 6
• Strony: 209--211
• Opis fizyczny: Bibliogr. 9 poz., rys., wykr., wzory

Twórcy

autor

Jaszczak S.

• Westpomeranian University of Technology in Szczecin, Department of Computer Science 49 Żołnierska St., PL-71210 Szczecin, Poland

autor

Nikończuk P.

• Westpomeranian University of Technology in Szczecin, Department of Maritime Technology and Transport 41 Piastów Ave., PL-71065 Szczecin, Poland

Bibliografia

• [1] Alt S., Sawodny O.: Model-based Temperature and Humidity Control of Paint Booth HVAC Systems. Mechatronics (ICM), 2015 IEEE International Conference, 160-165 DOI:10.1109/ ICMECH. 2015. 7083966.
• [2] Jaszczak S., Nikończuk P.: Synthesis of spray booth control software in programmable controller. Przegląd Elektrotechniczny, ISSN 0033-2097, R. 91 NR 11/2015:182-185.
• [3] Jaszczak S., Nikończuk P.: Temperature control algorithms for the refinishing spray booth. Measurement Automation and Monitoring (Pomiary Automatyka Kontrola) 7/2015, pp. 358-360.
• [4] Jaszczak S., Nikończuk P.: A model of the refinishing spray booth as a plant of automatic control. Measurement Automation and Monitoring (Pomiary Automatyka Kontrola) 7/2015, pp. 361-363.
• [5] Nikończuk P.: Sposoby ogrzewania powietrza w kabinach lakierniczych. Auto Moto Serwis nr 4/2012, str.44-45.
• [6] Nikończuk P., Jaszczak S.: Koncepcja modelowania dynamiki kabiny lakierniczej z wykorzystaniem algorytmów ewolucyjnych. Technika Transportu Szynowego 12/2015, pp. 1104-1107.
• [7] Ogonowski Z.: Drying control system for spray booth with optimization of fuel consumption. Applied Energy 88, 2011, 158.
• [8] Burners ignition sequencing to reduce fuel consumption & emissions http://www.n-side.com/burners-ignition-sequencing/
• [9] Minimization of no emissions from multi-burner coal-fired boilers http://www.osti.gov/scitech/servlets/purl/786863/