Performance analysis of variable speed multiphase induction motor with pole phase modulation

• Autorzy: Liu H. , Wang J. , Zhang Z.

Identyfikatory

DOI

10.1515/aee-2016-0031

• Języki publikacji: EN

Abstrakty

EN

The pole phase modulation (PPM) technique is an effective method to extend speed range and torque capabilities for an integrated starter and hybrid electric vehicles applications. In this paper, the five pole-phase combination types of a multiphase induction motor (IM) with 36 stator slots and 36 stator conductors are presented and compared quantitatively by using the time-stepping finite element method (TS-FEM). The 36 stator conductors of the proposed multiphase IM are fed by a 36 leg inverter and the current phase angle and amplitude of each stator conductor can be controlled independently. This paper focuses on the winding connection, the PPM technique and the performance comparative analysis of each pole-phase combination types of the proposed multiphase IM. The flux distribution, air-gap flux density, output torque, core losses and efficiency of five pole-phase combination types have been investigated.

Słowa kluczowe

EN

induction motor (IM); pole phase modulation (PPM); efficiency; FEM

• Wydawca: Polish Academy of Sciences, Committee on Electrical Engineering
• Czasopismo: Archives of Electrical Engineering
• Rocznik: 2016
• Tom: Vol. 65, nr 3
• Strony: 425--436
• Opis fizyczny: Bibliogr. 11 poz., fig., tab., wz.

Twórcy

autor

Liu H.

• School of Electrical Engineering, Beijing Jiaotong University 3 Shangyuan Cun, Haidian District, Beijing

autor

Wang J.

• School of Electrical Engineering, Beijing Jiaotong University 3 Shangyuan Cun, Haidian District, Beijing

autor

Zhang Z.

• School of Electrical Engineering, Beijing Jiaotong University 3 Shangyuan Cun, Haidian District, Beijing

Bibliografia

• [1] Kelly J. W., A novel control scheme for a pole-changing induction motor drive, PhD Thesis, Michigan State University (2007).
• [2] Gopakumar K., Sathiakumar S., Biswas S. K., Vithayathil J., Modified current source inverter fed induction motor drive with reduced torque pulsations, IEE proceedings 131(4): 159-164 (1984).
• [3] Pavithran K. N., Parimelalagan R., Krishnamurthy M. R., Studies on inverter-fed five-phase induction motor drive, IEEE Trans. Power Electron. 3(2): 224-235 (1988).
• [4] Rawc1iffe G. H., Burbidge R. F., A 2:1 pole-changing induction motor of improved performance, IEE proceedings 104(18):457-460 (1957).
• [5] Osama M., Lipo T. A., Modeling and analysis of a wide-speed-range induction motor drive based on electronic pole changing, IEEE Transactions on Industry Applications 33(5): 1177-1184 (1997).
• [6] Rajaraman K. C., Design of phase-change two-speed windings for induction motors, using pole-amplitude modulation techniques, IEE proceedings 131(5): 232-233 (1984).
• [7] RawclitIe G. H., Fong W., Clock diagrams and pole amplitude modulation, PROC. IEE 118(5): 675-680 (1971).
• [8] Rawcliffe G. H., Jayawant B. Y., The development of a new 3:1 pole-changing motor, Proc. IEEE 103(9): 306-316 (1956).
• [9] Sun D. S., Ge B. M., Bi D. Q., Winding design for pole-phase modulation of induction machines, Energy Conversion Congress and Exposition, Delft 278-283 (2010).
• [10] Umesh B. S., Sivakumar K., 15 phase induction motor drive with 1:3:5 speed ratios using pole phase modulation, The 2014 International Power Electronics Conference, Hiroshima, pp. 1400-1404 (2014).
• [11] Lin D., Zhou P., Fu W. N., Stanton S., Cendes Z. J., A dynamic core loss model for soft ferromagnetic and power ferrite materials in transient finite element analysis, IEEE Trans. Magn. 40(2): 1318-1321 (2004).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.