Possibility of the Use of Different Types of Materials in Passive Ventilation Systems of Munitions

• Autorzy: Wiśniewski A.

Identyfikatory

DOI

10.5604/01.3001.0009.2979

• Języki publikacji: EN

Abstrakty

EN

The paper presents different types of insensitive munition used in military equipment, especially in western countries. Tests of this munition, their parameters, e.g. fast and slow heating, bullet, fragment and shaped charge jet impact and sympathetic reaction are described. The characteristics of shape-memory materials like alloys and polymers are presented. Behaviour of shape-memory alloy is explained by example of TiNi al-loys during mechanical or thermal loading, and martensitic transformation into austen-ite during unloading. Material parameters of the TiNi alloys, their testing and mathematical equations are shown. Venting systems used in the explosive reactive armour cassettes are presented. Different examples of materials, including shapememory materials in munition, are demonstrated.

Słowa kluczowe

EN

ventilation system in munition; insensitive munitions; shape memory alloy; shape memory polymer; stress-induced martensitic transformation; TiNi alloy

• Wydawca: Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
• Czasopismo: Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
• Rocznik: 2016
• Tom: Vol. 7, Nr 3 (25)
• Strony: 21--34
• Opis fizyczny: Bibliogr. 14 poz., il., rys., tab.

Twórcy

autor

Wiśniewski A.

• Military Institute of Armament Technology, 7 Wyszyńskiego Street, 05-220 Zielonka, Poland

Bibliografia

• [1] NATO HQ. 2010. Guidance on the assessment and development of insensitive munitions (IM), Brussels: Allied Ordnance Publication.
• [2] Wiśniewski Adam. 2001. Armours, construction, designing and testing (in Polish). Warszawa: Wydawnictwa Naukowo-Techniczne.
• [3] Wiśniewski Adam, Wojciech Żurowski 2001. Ammunition and armours (in Polish). Radom: Wydawnictwo Politechniki Radomskiej.
• [4] Wiśniewski Adam, Edward Włodarczyk, T. Zubik, Wiesław Habaj, Paweł Podgórzak. 2003. „Protection of fighting vehicles” (in Polish). Problemy Techniki Uzbrojenia 89(4).
• [5] Dunić Vladimir, Elżbieta A. Pieczyska, Hisaaki Tobushi, M. Staszczak, Radovan Slavković. 2014. „Experimental and numerical thermomechanical analysis of shape memory alloy subjected to tension with various stress and strain rates”. Smart Mater. Struct. 23(5) : 1-11.
• [6] Lagoudas D.C. 2010. Shape Memory Alloys: Modelling and Engineering Applications. Berlin: Springer.
• [7] Takeda Kohei, Ryosuke Matsui, Hisaaki Tobushi, Elżbieta A. Pieczyska. 2013. „Creep and creep recovery under stress-controlled subloop loading in TiNi shape memory alloy”. Arch. Mech. 65(5) : 429-444.
• [8] Tobushi Hisaaki, Ryosuke Matsui, Kohei Takeda, Elżbieta A. Pieczyska. 2013. Mechanical Properties of Shape Memory Materials. Series Materials Science and Technologies. Mechanical Engineering Theory and Applications, New York: NOVA Science Publishers.
• [9] Cook J. 2004. Shape memory alloy connector & an overwound munition casing. Patent GB 2391899 A.
• [10] Traxler E.W. at al. 2013. Venting mechanisms for containers. Patent US 8,356,727 B2.
• [11] Fedoroff B.T., O.E. Sheffield. 1975. Encyclopedia of explosives and related items (vol. 2). New Jersey, US: Picatiny Arsenal Dover.
• [12] Wiśniewski Adam, R. Zbrzeźniak. 1991. Active armour segment (in Polish). Patent PL, No 156463.
• [13] Wiśniewski Adam. 1994. Reactive armour cassette (in Polish). Patent PL, No 174119.
• [14] Wiśniewski Adam. 1992. Tank with reactive armour (in Polish). Patent PL, No 168122.  

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.