Review of solutions used in high speed induction motor drives operating in household appliances

• Autorzy: Sobczyński D.

Identyfikatory

DOI

10.5277/PED160102

• Języki publikacji: EN

Abstrakty

EN

The paper presents the high-speed induction motor drive as a alternative for household appliances. Short comparison was made between standard and high-speed motors. The solutions that use three-phase induction motors were given in consideration with different types of rotors: solid or squirrel cage. The assumed power of drive was up to 1 kW. As the power source, single-phase voltage source has been adopted, which was indirectly converted to a three-phase output voltages with the fundamental frequency up to 667 Hz.

Słowa kluczowe

EN

high speed induction motor drives; household appliance drives; power electronic converters

• Wydawca: De Gruyter
• Czasopismo: Power Electronics and Drives
• Rocznik: 2016
• Tom: Vol. 1 (36), No. 1
• Strony: 27--39
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Sobczyński D.

• Rzeszów University of Technology, al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

Bibliografia

• [1]BINKOWSKI T., Universal High Speed Induction Motor Drives, Analysis and Simulation of Electrical and Computer Systems, Springer International Publishing, 2015, 149–162.
• [2]BINKOWSKI T. et al., A drive system with high-speed single-phase supplied three-phase induction motor, 13th Int. Power Electronics and Motion Control Conference, EPE-PEMC, 2008, 729–732.
• [3]BOGLIETTI A. et al., About the design of very high frequency induction motors for spindle applications, Conf. Rec. IEEE-IAS Annual Meeting, October, 1992, Vol. 1, 25–32.
• [4]BRONDUM D. et al., High-speed, direct-drive centrifugal compressors for commercial HVAC systems, Proc. of the Int. Compressor Engineering Conf., Purdue Univ., West Lafayette, 1998, 921–926.
• [5]BUCZEK K., SOBCZYŃSKI D., Analysis of Induction Motor and 330 Hz Inverter Drive System, 13th Int. Conf. on Electrical Drives and Power Electronics, EDPE’99, 1999, 64–68.
• [6]BUCZEK K., SOBCZYŃSKI D., Analysis and examination of high-speed induction motor drive system, Power Electronics and Electrical Drives. Polish Academy of Sciences, Electrical Engineering Committee, 2007, 487–498.
• [7]DU Z., OZPINECI B., TOLBERT L., CHIASSON J., DC-AC Cascaded H-bridge multi-level boost inverter with no inductors for electric/hybrid electric vehicle applications, IEEE Trans. Ind. Appl, Vol. 45, No. 3, 2009, 963–970.
• [8]KRYKOWSKI K. at al., Computer analysis of high-speed PM BLDC motor properties, COMPEL – The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2011, Vol. 30, No. 3, 941–956.
• [9]LÄHTEENMÄKI J., Design and voltage supply of high-speed induction machines, Acta Polytecnica Scandinavica, Electrical Engineering Series, No. 108, Diss. HUT, Espoo, 2002.
• [10]MEKHICHE M. et al., High speed motor drive development for industrial applications, Int. Electric Machines Drives Conf., Seattle, WA, 1999, 244–248.
• [11]POPESCU M., Induction motor modelling for vector control purposes, Helsinki University of Technology Department of Electrical and Communications Engineering Laboratory of Electromechanics Espoo’2000, Report 63, 2000.
• [12]RAHMAN M. et al., Super high speed electrical machines – summary, IEEE Power Engineering Society General Meeting, 2004, Vol. 2, 1272–1275.
• [13]RAO J., LI Y., High-performance control strategies and applications of a new hybrid cascaded multilevel inverter, IEEE Ind. Appl. Soc. Ann. Meet., 2008, 1–5.
• [14]SOMASEKHAR V., GOPAKUMAR K., PITTET A., RANGANATHAN V., PWM inverter switching strategy for a dual two-level inverter fed open-end winding induction motor drive with a switched neutral, IEE Proc. Electr. Power Appl., 2002, Vol. 149, No. 2, 152–159.
• [15]SOONG W., KLIMAN G., JOHNSON R., WHITE R., MILLER J., Novel High-Speed Induction Motor for a Commercial Centrifugal Compressor, IEEE Trans. Industry Applications, 2000, Vol. 36, No. 3, 706–713.