Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This paper presents the results of the conducted analysis on the on-grid photovoltaic installations designed for a single-family house by applying three different technologies (monocrystalline, polycrystalline and thin-film modules), compared to a simulation of the off-grid polycrystalline technology. As a result of the analysis conducted, the differences between the on-grid and off-grid systems could be determined. The simulation was made on the basis of the PV SOL program which allowed performing calculations concerning monthly and yearly yields during the period of 25 years, taking into account the average degradation of efficiency at 0.8% monthly. Additinoally, a return rate on investment was determined for different types of the analysed installations, taking into account an increase of electricity prices at 2.5% annually and a fixed subscriber’s fee (assumed as 38 euro monthly). Energy density (amount of energy acquired from 1m2 of the installation) and the amount of energy necessary to be purchased additionally from the electricity supplier to fully cover the demand for electricity for the analysed building were analysed as well.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
20--28
Opis fizyczny
Bibliogr. 7 poz., rys., tab.
Twórcy
autor
- Department of Heat Engineering and Air-Conditioning, Rzeszów University of Technology, al. Powstańców Warszawy 12, 35-084 Rzeszów, Poland
autor
- Department of Heat Engineering and Air-Conditioning, Rzeszów University of Technology, al. Powstańców Warszawy 12, 35-084 Rzeszów, Poland
Bibliografia
- 1. American Physical Society, April 25, 1954: Bell Labs demonstrates the first practical silicon solar cell. APS News 2009, 18(4).
- 2. Góralczyk I., Tytko R., 2015. Photovoltaics devices, photovoltaic and electrical installations (in Polish). 2nd Edition, Kraków.
- 3. Adeeb J,. Farhan A., Al-Salaymeh A. 2019. Temperature effect on performance of different solar cell technologies. Journal of Ecological Engineering, 20(5), 249–254.
- 4. Hoa Thanh Nguyen H.T., Nguyen L., Thi Lan P.D. 2019. Optimization of Copper Removal by Photovoltaic Electrocoagulation from Aqueous Solution Using Response Surface Methodology Towards Sustainable Development. Journal of Ecological Engineering, 20(7), 103–111.
- 5. Klugmann-Radziemska E., 2014. Postępy fotowoltaiki – aktualne technologie produkcji ogniw. Czysta Energia, 5(143), 40–42.
- 6. Szymański B. 2013. Small photovoltaic installation (in Polish). GLOB Energia, Kraków.
- 7. Rabczak S., Proszak-Miasik D. 2016. Effect of the type of heat sources on carbon dioxide emission. Journal of Ecological Engineering, 17(5), 186–191.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-65b464e8-f0c9-4734-9edf-d8706102743e