Mechanical properties of furniture elements using recycle waste materials embedded in resign – pilot study

• Autorzy: Brański Robert , Śmietańska Katarzyna

Identyfikatory

DOI

10.5604/01.3001.0054.9807

Warianty tytułu

PL

Właściwości mechaniczne elementów meblowych wykonanych z żywicy epoksydowej z wykorzystaniem materiałów pochodzących z recyklingu – badanie pilotażowe

• Języki publikacji: EN

Abstrakty

EN

Mechanical properties of furniture elements using recycle waste materials embedded in resign – pilot study. The aim of the research was to determine the influence of the type of additive (waste): wood, plastic straws, plastic caps and artificial flowers on the degree of durability of furniture elements made of epoxy resin. The results obtained as part of the above experiment and analyzed will be extremely helpful when choosing the type of waste used, while striving to achieve the best possible durability properties of the furniture. It can be concluded that the waste used in the experiment is suitable for use in creating elements from epoxy resin. It was found that in the case of waste requirements, they were characterized by different bending strength than samples with the presence of a time signal. The exception was the Young's modulus in the case of a wooden element (it reached the highest value, almost higher than in the case of occurrence). Experimental results that constitute a kind of additional use case for additional use. Disabled mechanical elements (all values) characteristic of nut-type controls.

PL

Właściwości mechaniczne elementów meblowych wykonanych z żywicy epoksydowej z wykorzystaniem materiałów pochodzących z recyklingu – badanie pilotażowe. Celem badań było określenie wpływu rodzaju dodatku (odpadu): kawałków drewna, słomek, plastikowych zakrętek i sztucznych kwiatów na właściwości mechaniczne elementów mebli wykonanych z żywicy epoksydowej. Stwierdzono, że w większości przypadków próbki z dodatkami odpadowymi charakteryzowały się mniejszą wytrzymałością na zginanie w porównaniu z próbkami z czystej żywicy epoksydowej. Wyjątkiem był moduł Younga w przypadku elementu z dodatkiem drewnem (osiągał on najwyższą wartość, prawie dwukrotnie większą niż w przypadku czystej żywicy). Wyniki eksperymentów potwierdzają, że rodzaj dodatku odegrał w tym przypadku znaczącą rolę. Zdecydowanie najniższe właściwości mechaniczne (wszystkie wartości) zaobserwowano dla elementów wykonanych z dodatkiem nakrętek.

Słowa kluczowe

EN

Zero Waste; recycling; eco-design; bending test; epoxy resin

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2023
• Tom: No. 124
• Strony: 99--110
• Opis fizyczny: Bibliogr. 44 poz., rys., tab.

Twórcy

autor

Brański Robert

• Faculty of Wood Technology, Warsaw University of Life Sciences – SGGW, Poland

autor

Śmietańska Katarzyna

• Department of Mechanical Processing of Wood, Faculty of Wood Technology, Warsaw University of Life Sciences – SGGW, Poland

Bibliografia

• 1. ALI N.S., KHAIRUDDIN N.F., ZAINAL S. ABIDIN, 2013: Upcycling: Re-use and recreate functional interior space using waste materials. INTERNATIONAL CONFERENCE ON ENGINEERING AND PRODUCT DESIGN EDUCATION 5 & 6 SEPTEMBER 2013, DUBLIN INSTITUTE OF TECHNOLOGY, DUBLIN, IRELAND, 798-803. DOI: 10.13140/2.1.2643.3603
• 2. ANTOV P., SAVOV V., NEVKOV N., 2020: Sustainable bio-based adhesives for eco-friendly wood composites. A review. Wood Research, 65(1), 51-62. DOI:10.37763/wr.1336-4561/65.1.051062
• 3. ATHIJIAYAMANI A., THIRUCHITRAMBALAM M., VAIRAVAN M, PAZHANIVEL B., 2010: Mechanical properties of natural fibers reinforced polyester hybrid composite. International Journal of Plastic Technology, 14,104–116. DOI:10.1007/s12588-009-0016-0
• 4. ATIQ UZ ZAMAN, 2012: Developing a Social Business Model for Zero Waste Management Systems: A Case Study Analysis. Journal of Environmental Protection,3, 1458-1469. doi:10.4236/jep.2012.311163
• 5. AWOGBEMI O., KALLON D.V.V., BELLO K.A., 2022: Resource recycling with the aim of achieving Zero-Waste manufacturing. Sustainability, 14(8), 4503. DOI:10.3390/su14084503
• 6. BARTL A., 2011: Barriers towards achieving a zero waste society. Waste Manag. 31, 2369-2370. DOI: 10.1016/j.wasman.2011.09.013
• 7. BRIDGENS B., POWELL M., FARMER G., WALSH C., REED E., ROYAPOOR M., GOSLING P., HALL J., HEIDRICH O., 2018: Creative upcycling: Reconnecting people, materials and place through making. Journal of Cleaner Production, 189, 145-154. DOI:10.1016/j.jclepro.2018.03.317
• 8. BUCK L., LEE S.,: 2020: Sustainable Design Approaches using Waste Furniture Materials for Design Students. INTERNATIONAL CONFERENCE ON ENGINEERING AND PRODUCT DESIGN EDUCATION 10-11 SEPTEMBER 2020, VIA DESIGN, VIA UNIVERSITY COLLEGE, HERNING, DENMARK DOI:10.35199/EPDE.2020.38
• 9. COLON M., FAWCETT B., 2006: Community-based household waste management: lessons learnt from EXNORA's ‘zero waste management’ scheme in two South Indian cities. Habitat International, 30(4):916-931. DOI:10.1016/j.habitatint.2005.04.006
• 10. DEMİRARSLAN K.O., DEMİRARSLAN D., 2021: Furniture Wastes and Their Environmental Impacts as Being a Different. Problem of Our Time. International Journal of Advances in Engineering and Pure Sciences, 33(1), 97-105. DOI: 10.7240/jeps.748061
• 11. EVANS D., 2011: Consuming Conventions: Sustainable Consumption, Ecological Citizenship and the Worlds of Worth. Journal of Rural Studies, 27(2), 109-115. DOI:10.1016/j.jrurstud.2011.02.002
• 12. HAIDIEZUL A. H. M., SIVASHANGARI GOPAL, AIMAN A. F., MOHAMAD SYAFIQ A. K., MUHAMMAD IKMAN ISHAK, SUHAIMI SHAHRIN, BAKRI BAKAR, NORSYAHADAH YEOP WASIR, WAN NUR ATIQAH WAN DRAMAN, NOOR DIYANA DAHLAN, 2018: Design and development of furniture using recycle waste materials embedded with resin. AIP Conference Proceedings. 2030, 020035. DOI: 10.1063/1.5066676
• 13. HE SH., LIU T., MINGWEI D., 2016: Preparation and Properties of Wood Flour Reinforced, Lignin-Epoxy Resin Composite. BioResources, 11(1), 2319-2333
• 14. IBTIHAL-AL.-NAMIE, AHMED ALLADIN, MANAL FLEYAH HASSAN.,2014: Study the Mechanical Properties of Epoxy Resin Reinforced With silica (quartz) and Alumina Particles. Journal For Mechanical And Material Engineering, 11 (3), 486-506
• 15. JARAMILLO H., GALARDO R., MARTINEZ C.A., 2018: Street furniture in recycled and resignified materials. International Meeting on Applied Sciences and Engineering, Journal of Physics Conference Series 1126(1):012066. DOI:10.1088/1742-6596/1126/1/012066
• 16. JAWORSKI C. CAPRICHO, FOX B., HAMEED N., 2019: Multifunctionality in Epoxy Resins. Polymer Reviews, 60(1), 1-41.
• 17. KOO B., HERGEL J., LEFEBVRE S., MITRA N.,J., 2016: Towards Zero-Waste Furniture Design. IEEE Transactions on Visualization and Computer Graphics, 99, 2627 – 2640. DOI:10.1109/TVCG.2016.2633519
• 18. KUMAR R., KUMAR K., SAHOOR P., 2014: Study of Mechanical Properties of Wood Dust Reinforced Epoxy Composite. 3rd International Conference on Materials
• Processing and Characterisation (ICMPC 2014). Procedia Materials Science, 6, 551 – 556
• 19. LEE S., BUCK L., 2020: Sustainable Design Approaches using Waste Furniture Materials for Design Students. INTERNATIONAL CONFERENCE ON ENGINEERING AND PRODUCT DESIGN EDUCATION 10-11 SEPTEMBER 2020, VIA DESIGN, VIA UNIVERSITY COLLEGE, HERNING, DENMARK. DOI: 10.35199/EPDE.2020.38
• 20. LI C., ZHANG R., WANG G., SHI Y., 2018: The mechanical properties of epoxy resin composites modified by compound Modification. AIP Conference Proceedings AIP ADVANCES, 8, 105325. Doi: 10.1063/1.5047083
• 21. LIN CH.R., CHEN M., TSENG M., CHIU A.S.F., ALI M.H., 2020: Profit Maximization for Waste Furniture Recycled in Taiwan Using Cradle-to-Cradle Production Programming. Mathematical Problem in Engineering, 2020. DOI:10.1155/2020/2948049
• 22. MACKENZIE A., 2005: Ekologia. PWN, Warszawa
• 23. MINGHUA Z., XIUMIN F., ROVETTA A., QICHANG H., VINCENTINI F., BINGKAI L., GIUSTIi A.,YI L., 2009: Municipal solid waste management in Pudong New Area. Waste Management, 29, 1227-1233
• 24. MCQUILLAN H., 2019: Zero waste design thinking. UNIVERSITY OF BORÅS STUDIES IN ARTISTIC, RESEARCH No 29.
• 25. MUNTEANU A., 2021: Eco-design. Furniture made of recycling materials – A new concept for the contemporan design. Journal of Social Sciences, 4(3), 60-70.DOI: 10.52326/jss.utm.2021.4(3).07
• 26. MURPHY S., PINCETL S., 2013: Zero waste in Los Angeles: Is the emperor wearing any clothes? Resources, Conservation & Recycling, 81, 40-51. DOI:10.1016/j.resconrec.2013.09.012
• 27. NOOR S. SADEQ, ZAID G. MOHAMMADSALIH, RAGHAD H. MOHAMMED, A., 2020: Effect of grain size on the structure and properties of coir epoxy composites. SN Applied Sciences 2: 1191. DOI:10.1007/s42452-020-2991-x
• 28. OZSOY N., OZSOY M. , MIMAROGLU A., 2015: Mechanical Properties of Chopped Carbon Fiber Reinforced Epoxy Composites. Acta Physica Polonica 130, 297-299.
• 29. QINGBIN SONG, JINHUI LI, TSINGUA UNIVER, 2014: Minimizing the Increasing Solid Waste Through Zero Waste Strategy. Journal of Cleaner Production, 104, 199-210. DOI: 10.1016/j.jclepro.2014.08.027
• 30. SHARHOLY M, AHMAD K., VAISHYA R.C., GUPTA R.D., 2007: Municipal solid waste characteristics and management in Allahabad, India. Waste Management, 27,490-496. DOI: 10.1016/j.wasman.2006.03.001
• 31. SONG Q., LI J., 2014: Minimizing the Increasing Solid Waste Through Zero Waste Strategy. Journal of Cleaner Production 104(11), 199-210. DOI: 10.1016/j.jclepro.2014.08.027
• 32. SUN Z., XU L., CHEN Z., WANG Y., TUSIINE R., CHENG CH., ZHOU SH., LIU Y., YU M., ZHANG H., 2019: Enhancing the Mechanical and Thermal Properties of Epoxy Resin via Blending with Thermoplastic Polysulfone. Polymers, 11, 461. DOI:10.3390/polym11030461)
• 33. SUNG K., 2015: A Review on Upcycling: Current Body of Literature, Knowledge Gaps and a Way Forward. International Conference on Environmental, Cultural, Economic and Social Sustainability, 17(4), 28-40.
• 34. TOP Y., 2015: Waste generation and utilisation in micro-sized furniture-manufacturing enterprises in Turkey. Waste Management, 35, 3-11. DOI:10.1016/j.wasman.2014.09.028
• 35. WALI E.., COLLINS W.H., HYCIENTH N., 2019: Waste-To-Wealth, Towards a Sustainable Zero-Waste in a Circular Economy: An Overview. International Journal of Emerging Engineering Research and Technology, 7(11), 1-11.
• 36. XIE Y., KURITA H., ISHIGAMI R., NARITA F., 2020: Assessing the Flexural Properties of Epoxy Composites with Extremely Low Addition of Cellulose Nanofiber Content. Applied Sciences, 10, 1159. DOI:10.3390/app10031159
• 37. YANG L., ZHU J., 2021: Recycling and Value-added Design of Discarded Wooden Furniture. BioResources 16(4), 6954-6964
• 38. YUAN L., HUANG J., GOU I., 2015: The recycling of furniture and the sustainable development. International Conference on Economics, Social Science, Arts, Education and Management Engineering (ESSAEME 2015, China,680-684
• 39. ZAMAN A.U., 2014: Identification of key assessment indicators of the zero waste management systems. Ecological Indicators, 36,683. DOI:10.1016/j.ecolind.2013.09.024
• 40. ZAMAN A.U., 2012: Developing a social business model for Zero Waste Management Systems: A case study analysis. Journal of Environmental Protection, 3(11), 1458-1469.DOI:10.4236/jep.2012.311163
• 41. ZAMAN A.U., 2014:. Measuring waste management performance using the ‘Zero Waste Index’: the case of Adelaide, Australia. Journal of Cleaner Production, 66, 407-419. DOI: Journal of Cleaner Production
• 42. ZHANG Z., ZHU J., Qi Q., 2023 Research on the Recyclable Design of Wooden Furniture Based on the Recyclability Evaluation. Sustability,15(24), 16758. DOI:10.3390/su152416758
• 43. PN‐EN ISO 178: 1998 Tworzywa sztuczne. Oznaczanie właściwości podczas zginania
• 44. https://www.ekologia.pl/wiadomosci/srodowisko/ten-kraj-produkuje-najwiecej-smieci-na-swiecie,25475.html

Uwagi

Błędna numeracja stron.