Simulation of wood surface geometry after machining

• Autorzy: Pauliny D. , Sandak J. , Orlowski K. , Wasielewski R.
• Języki publikacji: EN

Abstrakty

EN

Simulation of wood surface geometry after machining. This report presents a novel technique for generating and simulation of three dimensional map of wood surface. The effect of cutting parameters and vibrations while planning is presented. Surface roughness has been quantified by means of Ra and Rz parameters. An effect of feed per tooth combined with tool diameters are the most affecting the machined surface roughness.

Słowa kluczowe

EN

surface geometry; wood machining; surface simulation

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2012
• Tom: No. 79
• Strony: 147--151
• Opis fizyczny: Bibliogr. 11 poz.

Twórcy

autor

Pauliny D.

• Trees and Timber Institute IVALSA/CNR, San Michele All’Adige, ITALY

autor

Sandak J.

• Trees and Timber Institute IVALSA/CNR, San Michele All’Adige, ITALY

autor

Orlowski K.

• Department of Manufacturing Engineering and Automation, Mechanical Engineering Faculty, Gdansk University of Technology, Poland

autor

Wasielewski R.

• Department of Manufacturing Engineering and Automation, Mechanical Engineering Faculty, Gdansk University of Technology, Poland

Bibliografia

• 1.SANDAK J. AND NEGRI M., 2005, Wood Surface Roughness – What Is It?. Proceedings of the 17th International Wood Machining Seminar, Rosenheim, Vol.1, pp. 242-250.
• 2.RIEGEL A., 1993, Quality measurement in surface technologies. International Conference on Woodworking Technologies, Ligna, Hannover, pp 23:1-9.
• 3.OHTANI T., TANAKA C., USUKI H., 2004, Comparison of the heterogeneity of asperities in wood and aluminum sanding surfaces. Precision Engineering 28(1):58-64.
• 4.THOMAS T.R., 1999, Rough surfaces. Imperial College Press, London. 278p.
• 5.MAGOSS E., SITKEI G., LANG M., 2005, New Approaches in the Wood Surface Roughness Evaluation. Proceedings of the 17th International Wood Machining Seminar, Rosenheim, Vol.1, pp. 251-257.
• 6.FUJIWARA Y., FUJII Y., OKUMURA S., 2003, Effect of Removal of Deep Valleys on the Evaluation of Machined Surfaces of Wood. Forest Products Journal. pp. 58-62.
• 7.ADAMCZAK S., MIKO E., CUS F., 2009, A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry. Journal of Mechanical Engineering 55(1):45-54.
• 8.SCHMITZA T., COUEYB J., MARSHB E., MAUNTLERA N., HUGHESA D., 2007, Runout effects in milling: Surface finish, surface location error and stability. International Journal of Machine Tools & Manufacture 47:841–851.
• 9.CHANG C., LU H., 2006, Study on the prediction model of surface roughness for side milling operations. Int J Adv Manuf Technol 29:867–878.
• 10.ROJAS H., CORRAL I., CALVET J., 2007, Numerical simulation model for the determination of surface roughness in side milling as a function of feed and of the tool edges radii. Archives of Materials Science, Vol. 28, No. 1-4, pp. 51-55.
• 11.SANDAK J., 2011, Modeling wood surface geometry after wood machining. Proceedings of the 20th International Wood Machining Seminar, Skellefteå, Vol. 1, pp. 173-180.