Design Of A Bi-Functional α-Fe2O3/Zn2SiO4:Mn2+ By Layer-By-Layer Assembly Method

• Autorzy: Yu R. , Yun J. , Pee J-H. , Kim Y.

Identyfikatory

DOI

10.1515/amm-2015-0090

Warianty tytułu

PL

Projektowanie dwufunkcyjnych proszków α-Fe2O3/Zn2SiO4:Mn2+ metodą warstwa po warstwie

• Języki publikacji: EN

Abstrakty

EN

This work describes the design of bi-functional α-Fe₂O₃/Zn₂SiO₄:Mn²⁺ using a two-step coating process. We propose a combination of pigments (α-Fe₂O₃) and phosphor (Zn₂SiO₄:Mn²⁺ ) glaze which is assembled using a layer-by-layer method. A silica-coated α-Fe₂O₃ pigment was obtained by a sol-gel method and a Zn2+ precursor was then added to the silica-coated α-Fe₂O₃ to create a ZnO layer. Finally, the Zn₂SiO₄:Mn²⁺ layer was prepared with the addition of Mn²⁺ ions to serve as a phosphor precursor in the multi-coated α-Fe₂O₃, followed by annealing at a temperature above 1000°C. Details of the phase structure, color and optical properties of the multi-functional α-Fe₂O₃/Zn₂SiO₄:Mn²⁺ were characterized by transmission electron microscopy and X-ray diffraction analyses.

Słowa kluczowe

EN

red pigment; α-Fe2O3; Zn2SiO4:Mn2+ layer; phosphor; bi-functional

PL

α-Fe2O3; Zn2SiO4: Mn2+; fosfor; proszki dwufunkcyjne; pigment czerwony

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2015
• Tom: Vol. 60, iss. 2B
• Strony: 1165--1167
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Yu R.

• Engineering Ceramic Center, Korea Institute of Ceramic Engineering & Technology, Icheon 467-843, South Korea

autor

Yun J.

• Engineering Ceramic Center, Korea Institute of Ceramic Engineering & Technology, Icheon 467-843, South Korea

autor

Pee J-H.

• Ceramicware Center, Korea Institute of Ceramic Engineering & Technology, Icheon 467-843, South Korea

autor

Kim Y.

• Engineering Ceramic Center, Korea Institute of Ceramic Engineering & Technology, Icheon 467-843, South Korea

Bibliografia

• [1] K. Shin, J. J. Kim, K. D. Suh, J. Colloid and Interface Sci. 350, 581 (2010).
• [2] L. J. Lauhon, M. S. Gudiksen, D. Wang, C. M. Lieber, Nature 420, 7 (2002).
• [3] H. S. Yang, Y. Kim, J. Kor. Powd. Met. Inst. 19, 117 (2012).
• [4] R. Yu, Y. Kim, J. Nanosci. Nanotech (2014) (in press).
• [5] R. Yu, Y. Kim, J. Kor. Powd. Met. Inst. 20, 371 (2013).
• [6] R. Yu, J.H. Pee, K.J. Kim, Y. Kim, Chem. Lett. 40, 1400 (2011).
• [7] H. S. Yang, Y. H. Min, Y. Kim, U. Y. Jeong, Colloids & Surfaces A: Physicochem. Eng. Aspects 420, 30 (2013).
• [8] Y. Kim, J. H. Pee, J. H. Chang, K. Choi, K. J. Kim, D. Y. Jung, Chem. Lett. 38, 842 (2009).
• [9] S. Schelz, F. enguehard, N. Caron, D. Plessis, B. Minot, F. Gruillet, J. L. Longuet, N. Teneze, E. Bruneton, J. Mater. Soc. 43, 1984 (2008).
• [10] E. Ozel, S. Turan, J. Eur. Ceram. Soc. 27, 1751 (2007).
• [11] T. Sakamoto, S. Kamei, K. Uematsu, T. Ishigaki, K. Toda, M. Sato, J. Ceram. Process Res. 14, 64 (2013).
• [12] R. Ye, G. Jia, D. Deng, Y. Hua, Z. Cui, S. Zhao, L. Huan, H. Wang, C. Li, S. Xu, J. Phys. Chem. C 115, 10851 (2011).
• [13] W. Stöber, A. Fink, E. Bohn, J. Colloid Interface Sci. 26, 62 (1968).
• [14] S. R. Lukic, D. M. Petrovic, M. D. Dramicanin, M. Mitric, L. Dacanin, Scripta Mater. 58, 655 (2008).
• [15] R. Yu, J. H. Pee, H. J. Kim, Y. Kim, Electron. Mater. Lett. (2014) http://www.e-eml.org/upload/EML-14-104.pdf (in press).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.