Microstructure and wear of thermal sprayed composite NiAl-based coatings

• Autorzy: Poliarus O. , Morgiel J. , Umanskyi O. , Pomorska M. , Bobrowski P. , Szczerba M. J. , Kostenko O.

Identyfikatory

DOI

10.1016/j.acme.2019.06.002

• Języki publikacji: EN

Abstrakty

EN

In present paper, the NiAl intermetallic was used as a matrix for elaboration of new composite coatings with hard additives like CrB2 and ZrB2 borides. The composite materials of NiAl-CrB2 and NiAl-ZrB2 systems were obtained by sintering of initial powders in vacuum. The composite powders were deposited by atmospheric plasma spray (APS) and detonation (D-gun) methods. Investigation of phase composition of developed composite materials as well as coatings obtained from them, the XRD analyses were performed. The microstructure of composite coatings has been investigated using SEM and TEM methods.

Słowa kluczowe

EN

NiAl intermetallic; borides; composite materials; coating materials; APS and D-gun methods; wear resistance

PL

powłoki kompozytowe; materiały kompozytowe; odporność na zużycie

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2019
• Tom: Vol. 19, no. 4
• Strony: 1095--1103
• Opis fizyczny: Bibliogr. 21 poz., rys., wykr.

Twórcy

autor

Poliarus O.

• Frantsevich Institute for Problems of Materials Science, National Academy of Sciences of Ukraine (IPMS NASU), Krzhyzhanovsky Str. 3, 03142 Kyiv-142, Ukraine

autor

Morgiel J.

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences (IMIM PAN), Reymonta Str. 25, 30-059 Kraków, Poland

autor

Umanskyi O.

• Frantsevich Institute for Problems of Materials Science, National Academy of Sciences of Ukraine (IPMS NASU), Krzhyzhanovsky Str. 3, 03142 Kyiv-142, Ukraine

autor

Pomorska M.

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences (IMIM PAN), Reymonta Str. 25, 30-059 Kraków, Poland

autor

Bobrowski P.

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences (IMIM PAN), Reymonta Str. 25, 30-059 Kraków, Poland

autor

Szczerba M. J.

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences (IMIM PAN), Reymonta Str. 25, 30-059 Kraków, Poland

autor

Kostenko O.

• Frantsevich Institute for Problems of Materials Science, National Academy of Sciences of Ukraine (IPMS NASU), Krzhyzhanovsky Str. 3, 03142 Kyiv-142, Ukraine

Bibliografia

• [1] R. Darolia, D.F. Lahrman, R.D. Field, Overview of NiAl for high temperature structural application: ordered intermetallics, Phys. Metall. Mech. Behav. 3 (1992) 679–698.
• [2] J.D. Whittenberger, R.K. Viswanadham, S.K. Mannan, B. Sprissler, Elevated temperature slow plastic deformation of NiAl-TiB2 particulate composites at 1200 and 1300 K, J. Mater. Sci. 25 (1990) 35–44.
• [3] J.D. Whittenberger, S. Kumar, S.K. Mannan, R.K. Viswanadham, Slow plastic deformation of extruded NiAl- 10TiB2 particulate composites at 1200 and 1300 K, J. Mater. Sci. Lett. 9 (1990) 326–328.
• [4] A.A. Shokati, N. Parvin, M. Shokati, Combustion synthesis of NiAl matrix composite powder reinforced by TiB2 and TiN particulates from Ni–Al–Ti–BN reaction system, J. Alloys Compd. 585 (2014) 637–643.
• [5] H.E. Camurlu, F. Maglia, Self-propagating high-temperature synthesis of ZrB2 or TiB2 reinforced Ni–Al composite powder, J. Alloys Compd. 478 (2009) 721–725.
• [6] M. Mohammadnezhad, M. Shamanian, M.H. Enayati, M. Salehi, A. Hoseynian, Microstructures and properties of NiAl–TiC nanocomposite coatings on carbon steel surfaces produced by mechanical alloying technique, Surf. Coat. Technol. 238 (2014) 180–187.
• [7] H. Cui, L. Ma, L. Cao, F. Teng, N. Cui, Effect of NiAl content on phases and microstructures of TiC–TiB2–NiAl composites fabricated by reaction synthesis, Trans. Nonferrous Met. Soc. 24 (2014) 346–353.
• [8] L.Y. Sheng, F. Yang, T.F. Xi, J.T. Guo, Investigation on microstructure and wear behavior of the NiAl-TiC-Al2O3 composite fabricated by self-propagation high-temperature synthesis with extrusion, J. Alloys Compd. 554 (2013) 182–188.
• [9] S.T. Chang, W.H. Tuan, H.C. You, I.C. Lin, Effect of surface grinding on the strength of NiAl and Al2O3/NiAl composites, Mater. Chem. Phys. 59–3 (1999) 220–224.
• [10] S. Zhu, Q. Bi, M. Niu, J. Yang, W. Liu, Tribological behavior of NiAl matrix composites with addition of oxides at high temperatures, Wear 274–275 (2012) 423–434.
• [11] B. Movahedi, Fracture toughness and wear behavior of NiAl- based nanocomposite HVOF coatings, Surf. Coat. Technol. 235 (2013) 212–219.
• [12] O. Umanskyi, O. Poliarus, M. Ukrainets, M. Antonov, Physical- chemical interaction in NiAl-MeB2 systems intended for tribological applications, Weld. J. 94 (2015) 225–230.
• [13] O. Umanskyi, O. Poliarus, M. Ukrainets, I. Martsenyuk, Effect of ZrB2, CrB2 and TiB2 additives on the tribological characteristics of NiAl-based gas-thermal coatings, Key Eng. Mater. 604 (2014) 20–23.
• [14] O. Poliarus, J. Morgiel, P. Bobrowski, M. Szlezynger, O. Umanskyi, M. Ukrainets, L. Maj, O. Kostenko, Effect of powder preparation on the microstructure and wear of plasma-sprayed NiAl/CrB2 composite coatings, J. Therm. Spray Technol. (2019).
• [15] J. Guo, Z. Wang, L. Sheng, L. Zhou, C. Yuan, Z. Chen, L. Song, Wear properties of NiAl based materials, Prog. Nat. Sci.: Mat. Int. 22–5 (2012) 414–425.
• [16] X. Shi, W. Zhai, Z. Xu, M. Wang, J. Yao, S. Song, Y. Wang, Synergetic lubricating effect of MoS2 and Ti3SiC2 on tribological properties of NiAl matrix self-lubricating composites over a wide temperature range, Mater. Des. 55 (2014) 93–103.
• [17] E. Liu, Y. Gao, J. Jia, Y. Bai, W. Wang, Microstructure and mechanical properties of in situ NiAl–Mo2C nanocomposites prepared by hot-pressing sintering, Mater. Sci. Eng. A 592 (2014) 201–206.
• [18] X. Shi, M. Wang, W. Zhai, Z. Zhu, Z. Xu, Q. Zhang, S. Song, J. Yao, A. Qamar ud Din, Friction and wear behavior of NiAl–10 wt%Ti3SiC2 composites, Wear 303 (2013) 9–20.
• [19] X. Shi, M. Wang, W. Zhai, Z. Xu, Q. Zhang, Y. Chen, Influence of Ti3SiC2 content on tribological properties of NiAl matrix self-lubricating composites, Mater. Des. 45 (2013) 179–189.
• [20] X. Shi, W. Zhai, M. Wang, Z. Xu, J. Yao, S. Song, Y. Wang, Tribological behaviors of NiAl based self-lubricating composites containing different solid lubricants at elevated temperatures, Wear 310 (2014) 1–11.
• [21] O. Poliarus, J. Morgiel, O. Umanskyi, M. Szlezynger, M. Pomorska, P. Bobrowski, M. Szczerba, Microstructure and phase composition of NiAl-CrB2 composite powders used for plasma spraying, Compos. Theory Pract. 18 (2) (2018) 121–124.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020)