Utilisation of drilling waste muds from drilling waste dump

• Autorzy: Kotwica Ł. , Wons W. , Malata G. , Murzyn P. , Jamrozik A. , Gonet A.

Identyfikatory

DOI

10.7494/drill.2015.32.3.623

• Języki publikacji: EN

Abstrakty

EN

Dynamically developing drilling industry is connected with some environmental impact. Considerable amounts of contaminated drilling waste is produced, regardless the applied prevention measures. The generated drilling waste is diversified both chemically and physico-mechanical. These properties ma ke utilization or managing of drilling waste difficult. In article presented results laboratory research stabilization of drilling waste mud from Polish commercial drilling waste dump. Samples were taken from an old lot which is not currently under operation and was provided to be subjected to reclamation. Investigated waste drilling mud stored in waste dump contains h igh amounts of unbound ions, which can be leached out of the sample. It cause the method of utilization to fulfill two goals: first it should allow to solidify the material in order to obtain material easy to transport and process and second the method should allow to decrease the amount of ions which can be leached out of the final material.

Słowa kluczowe

EN

drilling waste; drilling waste management; stabilization drilling waste

• Wydawca: AGH University of Science and Technology Press
• Czasopismo: AGH Drilling, Oil, Gas
• Rocznik: 2015
• Tom: Vol. 32, no. 3
• Strony: 623--636
• Opis fizyczny: Bibliogr. 6 poz., wykr., tab., rys.

Twórcy

autor

Kotwica Ł.

• AGH University of Science and Technology, Faculty of Materia ls Science and Ceramics, Krakow, Poland

autor

Wons W.

• AGH University of Science and Technology, Faculty of Materia ls Science and Ceramics, Krakow, Poland

autor

Malata G.

• AGH University of Science and Technology, Faculty of Materia ls Science and Ceramics, Krakow, Poland

autor

Murzyn P.

• AGH University of Science and Technology, Faculty of Materia ls Science and Ceramics, Krakow, Poland

autor

Jamrozik A.

• AGH University of Science and Technology, Faculty of Materia ls Science and Ceramics, Krakow, Poland

autor

Gonet A.

• AGH University of Science and Technology, Faculty of Materia ls Science and Ceramics, Krakow, Poland

Bibliografia

• [1] Bakke T., Klungsøyr J., Sanni S.: Environmental impacts of produced water and drilling waste discharges from the Norwegian offshore petroleum industry. Marine Environmental Research, vol. 92, 2013, pp. 154–169.
• [2] Fijał J., Gonet A., Stryczek S., Czekaj L.: Destabilization of colloidal microstructure of used drilling mud by reactive composites – management of treated wastes. Mineralogia. Special Papers, vol. 33, 2008, p. 58 [4th Mid-European Clay Conference 2008: Zakopane, Poland, September 22–27, 2008].
• [3] Gonet A. (ed.): Metody przetwarzania organiczno-mineralnych odpadów wiertniczych w aspekcie ich zagospodarowania. Wydział Wiertnictwa, Nafty i Gazu, Akademia Górniczo-Hutnicza im. S. Staszica, Kraków 2006.
• [4] Jamrozik A.: Możliwości kompleksowego recyklingu odpadowych płuczek wiertniczych. Wydawnictwa AGH, Kraków 2009.
• [5] Macnar K.: Badania wpływu składu i właściwości odpadów wiertniczych na dobór technologii recyklingu, odzysku lub unieszkodliwiania. PhD. Thesis, AGH, University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow 2014.
• [6] Wysocki S.: Floculation of bentonite suspensions and salted drilling mud with new cationic flocculants (PT-floc-201107). AGH Drilling, Oil, Gas, vol. 27, no. 4, 2010, pp. 759–764.