Health monitoring of composite car roof failure under effect of different impact velocity

• Autorzy: Madeh Ahmed Raee , Abd-Ali Nabel Kadum

Identyfikatory

DOI

10.29354/diag/174100

• Języki publikacji: EN

Abstrakty

EN

During this work, the roof of the car was used as an engineering application to study and monitor the occurrence of failures under the influence of various loads. The shells are made of multilayer composite materials using epoxy resin reinforced with carbon fiber and aluminium oxide granules as reinforcing materials to increase the impact resistance that vehicles may be exposed to while driving, in addition to other loads and conditions such as vibration and constant exposure to moisture and sunlight. The simulation program was used the finite elements method through software Abaqus program in addition to the program MATLAB v.2020a to process the data obtained from the method that used in this study. The results showed that the specified failure criteria work well for predicting the overall structural response such as strain, stress, maximum force and displacement. The losses of energy of impact collision increase as an increase in impact velocity. The dissipation of energy which depend on the stress and strain distribution during elastic deformations. The effect of thickness of the lamina plays an important role in health monitoring the structure.

Słowa kluczowe

EN

failure index; Tsai-Wu; health monitoring; car roof; stress analysis

PL

wskaźnik uszkodzeń; dach samochodu; analiza naprężeń; uderzenie

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2023
• Tom: Vol. 24, No. 4
• Strony: art. no. 2023406
• Opis fizyczny: Bibliogr. 29 poz., rys., tab.

Twórcy

autor

Madeh Ahmed Raee

• Mechanical Engineering Dep., College of Engineering, University of Al-Qadisiyah, Iraq

• https://orcid.org/0000-0003-1844-0381

autor

Abd-Ali Nabel Kadum

• Mechanical Engineering Dep., College of Engineering, University of Al-Qadisiyah, Iraq

• https://orcid.org/0000-0001-6217-8320

Bibliografia

• 1. Chang FK, Chang KY. A progressive damage model for laminated composites containing stress concentrations. Journal of Composite Materials 1987; 21:834-855. https://doi.org/10.1177/002199838702100904.
• 2. Deuschle HM. 3D failure analysis of UD fiber reinforced composites: Puck’s theory within FEA. Phd Dissertation, Institute of Statics and Dynamics of Aerospace Structures, University of Stuttgart 2010.
• 3. Munden DC. Development of a progressive failure model for notched woven composite laminates. Doctoral dissertation , Virginia Tech 2018.
• 4. Madeh AR, Majeed WI. Effect of boundary conditions on thermal buckling of laminated composite shallow shell. Materials Today: Proceedings 2021; 42: 2397-2404.
• 5. Madeh AR, Majeed WI. Effect of thermal environment on transient response of laminated shallow shells with different boundary conditions. Journal of Engineering Science and Technology 2022; 17(5): 3160-3173.
• 6. Kaneko T, Ujihashi S, Yomoda H, Inagi S. Finite element method failure analysis of a pressurized FRP cylinder under transverse impact loading. Thin-Walled Structures 2008;46:898–904. https://doi.org/10.1016/j.tws.2008.01.016.
• 7. Velosa JC, Nunes JP, Antunes PJ, Silva JF Marques AT. Development of a new generation of filament wound composite pressure cylinders. Ciencia e Tecnologia dos Materiais 2017; 19. https://doi.org/10.1016/j.compscitech.2008.09.018.
• 8. Abd-Ali NK, Madeh AR. Structural analysis of functionally graded material using sigmioadal and power law. Diagnostyka 2021; 22: 59-65 http://dx.doi.org/10.29354/diag/144171.
• 9. Madeh AR, Abd-Ali NK. The stress analysis effect on structural health monitoring in functionally graded shell. Diagnostyka 2022; 23(3):2022302. https://doi.org/10.29354/diag/152180.
• 10. Ahmadian MT, Bonakdar M. A new cylindrical element formulation and its application to structural analysis of laminated hollow cylinders. Finite Elements in Analysis and Design 2008; 44: 617-630. https://doi.org/10.1016/j.finel.2008.02.003.
• 11. Wang JTS, Lin CC. Stresses in rotating composite cylindrical shells. Composite Structures 1993; 25: 157-164. https://doi.org/10.1016/0263-8223(93)90161-I.
• 12. Starbuck JM, Stress analysis of laminated composite cylinders Under non-axisymmetric loading. Lockheed Martin Energy Research Corporation, DE-AC05-96OR22464.
• 13. Marinucci G, de Andrade AHP, Micro structural analysis in asymmetric and un-balanced composite cylinders damaged by internal pressure. Composite Structures 2006;72(1):86-90. https://doi.org/10.1016/j.compstruct.2004.10.021.
• 14. Abd-Ali NK, Farhan MM, Hassan NY. Improvement of mechanical properties of the rubbery part in cement packing system using new rubber materials. Journal of Engineering Science and Technology 2021; 16(2): 1601-1613. http://jestec.taylors.edu.my/V16Issue2.htm.
• 15. Abd-Ali NK. The effect of cure activator zinc oxide nanoparticles on the mechanical behavior of polyisoprene rubber. Journal of Engineering Science and Technology 2020; 15(3): 2051-2061. http://jestec.taylors.edu.my/V15Issue3.htm.
• 16. Madeh, A.R., Abd-Ali, N.K., The dynamic response of doubly curved shell under effect of environment sustainable temperature, AIP Conference Proceedings, 2023, 2776, 050014. https://doi.org/10.1063/5.0137247.
• 17. Bhavya S, Kumar PR, Kalam SA, Abdul S. Failure analysis of a composite cylinder. IOSR Journal of Mechanical and Civil Engineering 2012; 3(3): 01-07. http://dx.doi.org/10.9790/1684-0330107.
• 18. Chen X, Sun X, Chen P, Wang B, Gu J, Wang W, Zhao Y. Rationalized improvement of Tsai–Wu failure criterion considering different failure modes of composite materials. Composite Structures 2021; 256: 113120. https://doi.org/10.1016/j.compstruct.2020.113120.
• 19. Manavalan AT, Suresh R, Krishnadasan CK, Thomas S. Structural analysis and progressive failure analysis of laminated composite joints-single pin configuration. International Journal of Engineering and Technical Research (IJETR) 2016; 5(4).
• 20. Farhan MM, Abd-Ali NK, Hassan NY. Development the performance of the rubbery discharge part in flexopump system. Journal of Engineering and Applied Sciences 2018;13(24):10148-10157. http://dx.doi.org/10.3923/jeasci.2018.10148.10157.
• 21. Abd-Ali NK. The effect of adding nanoparticles on the mechanical properties of acrylic removable denture. Journal of Engineering Science and Technology 2022; 17(4): 2983-2996. http://jestec.taylors.edu.my/V17Issue4.htm.
• 22. Aljanabi M, Hunain M, Alnomani S. Experimental and theoretical studies of last ply failure analysis on the laminate polymer composite materials with different orientation and stacking sequence of fibers based on classical laminate theory. Kerbala Journal for Engineering Science 2021; 1(2): 170-190.
• 23. Katunin A. Localization of damage in beam-like structures applying time-frequency distributions to modal shapes of vibration. Diagnostyka 2016; 17(3): 53-58.
• 24. Guebailia M, Ouelaa N. The dynamic response of a continuous plate for different surface states. Diagnostyka 2017; 18(4): 11-17.
• 25. Marsili R, Borgarelli N. Measurement of contact pressure distributions between surfaces by thermoelasticic stress analisys. Diagnostyka 2017, 18(4): 61-67.
• 26. Hamrit F, Necib B. Analysis of mechanical structures using plate finite element method under different boundary conditions. Diagnostyka 2018; 19(2): 3-9.
• 27. Markuszewski D. Comparison of various types of damage symptoms in the task of diagnostic composite profiles. Diagnostyka 2019; 20(3): 105-110. http://dx.doi.org/10.29354/diag/111799.
• 28. John JE. Stress and Failure Analysis of FiberReinforced Composite Structures with ComputerBased Solutions. PhD Dissertation 2020.
• 29. Agarwal BD JN Narang. Strength and failure mechanism of anisotropic composites. Fiber Science Technology 1977;10(1):37-52. https://doi.org/10.1016/0015-0568(77)90027-6.