A Novel Compact Ultra-Wideband Planar Inverted-L Antenna For Wireless Application

• Autorzy: Issa Iman Ben , Essaaidi Mohamed

Identyfikatory

DOI

10.24425/ijet.2022.139845

• Języki publikacji: EN

Abstrakty

EN

A novel compact Ultra-Wide-Band Planar Inverted-L antenna is presented and investigated in this paper. The proposed antenna consists of a square planar radiating element with a U-shaped slot. The radiating element is supported by a shorting wall, and fed by a single 50 Ohms characteristic impedance microstripe line, printed on the top of the FR-4 substrate. The ground plane of the antenna is printed on the other side of the substrate. The entire antenna occupies only a small volume of 20mm × 35mm × 4mm, and is capable of operating from 4.2GHz to 8.6GHz (68.75%) and offers a maximum gain of 5.24dB. Therefore, it is suitable for UWB systems and other wireless and mobile technologies and, thus, can be integrated into smartwatch, mobile phones, tablets and laptops. The design of this antenna was carried out using 3D software such as CST studio and Ansoft HFSS to compare and validate the results.

Słowa kluczowe

EN

compact; planar inverted-L antenna; ultra-wideband; wireless applications

• Wydawca: Polish Academy of Sciences, Committee of Electronics and Telecommunication
• Czasopismo: International Journal of Electronics and Telecommunications
• Rocznik: 2022
• Tom: Vol. 68, No. 1
• Strony: 35--40
• Opis fizyczny: Bibliogr. 12 poz., rys., wykr.

Twórcy

autor

Issa Iman Ben

• Department of Physics, Abdelmalek Essaadi University, Faculty of Science, Tetuan, Morocco

autor

Essaaidi Mohamed

• High National School for Computer Science and Systems Analysis-Rabat, Mohammed V University, Rabat, Morocco

Bibliografia

• [1] B. Lee and F. Harackiewicz, “Miniature microstrip antenna with a partially filled high-permittivity substrate,” IEEE Trans. Antennas Propag., vol. 50, no. 8, pp. 1160–1162, Aug. 2002.
• [2] T. Lo, C.-O. Ho, Y. Hwang, E. K.W. Lam, and B. Lee, “Miniature aperture coupled microstrip antenna of very high permittivity,” Electron. Lett., vol. 33, no. 1, pp. 9–10, 1997.
• [3] S. Reed, L. Desclos, C. Terret, and S. Toutain, “Patch antenna size reduction bymeans of inductive slots,” Microw. Opt. Technol. Lett., vol. 29, no. 2, pp. 79–81, 2001.
• [4] X. Cheng, J. Wu, R. Blank, D. Senior, and Y.-K. Yoon, “An omnidirectional wrappable compact patch antenna for wireless endoscope applications,” IEEE Antennas Wireless Propag. Lett., vol. 11, pp. 1667–1670, 2012.
• [5] D. Wang, H. Wong, and C. H. Chan, “Small patch antennas incorporated with a substrate integrated irregular ground,” IEEE Trans. Antennas Propag., vol. 60, no. 7, pp. 3096–3103, Jul. 2012.
• [6] S. Pinhas and S. Shtrikman, “Comparison between computed and measured bandwidth of quarter-wave microstrip radiators,” IEEE Trans. Antennas Propag., vol. 36, no. 11, pp. 1615–1616, Nov. 1988.
• [7] R. Chair, K. F. Lee, and K. M. Luk, “Bandwidth and cross-polarization characteristics of quarter-wave shorted patch antennas,” Microw. Opt. Technol. Lett., vol. 22, no. 2, pp. 101–103, 1999.
• [8] S. Alja’afreh, Y. Huang, Q. Xu, L. Xing and O. A. Saraereh, “MIMO antenna system of a compact 4-element PILA for 4G handset applications,” 2016 Loughborough Antennas & Propagation Conference (LAPC), Jan. 2017.
• [9] S. Alja’afreh, Y. Huang, L. Xing, Q. Xu and X. Zhu, “A Low Profile and Wideband PILA-based Antenna for Handset Diversity Applications,” IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 923-926, Dec 2014.
• [10] Z. N. Chen, M. Y. W. Chia, “Broadband planar inverted-L antennas,” IEE Proceedings - Microwaves Antennas and Propagation, vol. 148, no. 5, pp. 339-342, Oct 2001.
• [11] “Computer Simulation Technology”, CST STUDIO SUITE. [Online] www.cst.com
• [12] “High Frequency Structure Simulator”, Ansoft LLC. [Online] www.ansys.com