Computer aided optimal design of servo drives for CNC machine tools

• Autorzy: Pandilov Z. , Dukovski V.
• Języki publikacji: EN

Abstrakty

EN

Generally servo drives for CNC machine tools have a very simple kinematic structure. But the optimal servo drives design is a problem which consists of an appropriate selection of AC or DC motors and mechanical transmission elements, which must satisfy some conditions as a system. Because of the extensive calculations and optimization algorithms, original computer programs are developed.

Słowa kluczowe

EN

computer aided design; servo drives; CNC machine tools; optimal

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2008
• Tom: Vol. 8, No. 1
• Strony: 77--83
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Pandilov Z.

• University "Sv. Kiril i Metodij"-Skopje, Faculty of Mechanical Engineering, Karpos II b.b., P.O.Box 464, MK-1000, Skopje, Republic of MACEDONIA

autor

Dukovski V.

• University "Sv. Kiril i Metodij"-Skopje, Faculty of Mechanical Engineering, Karpos II b.b., P.O.Box 464, MK-1000, Skopje, Republic of MACEDONIA

Bibliografia

• [1] GROSS H., HAMANN J., WIEGAERTNER G., Electrical Feed Drives in Automation: Basic. Contmtation, Diniensioninf;, MCD Corporate Publishing, Erlangen and Munich, 2001.
• [2] KAKINO, Y., MATSUBARA, A., LI, Z., UEDA, D., NAKAGAWA, H., TAKESHITA, T., MARUYAMA, H., A study of the Total Tuning of the Feed Drive System in NC Machine Tools (1st Report)-Modelling of Feed Drive Mechanism and Identification of the Parameters, Journal of the Japan Society of Precision Engineering, Vol. 60, No. 8, 1994, 1097-1101.
• [3] KAKINO, Y., MATSUBARA, A., LI, Z., UEDA, D., NAKAGAWA, H., TAKESHITA, T., MARUYAMA, H., A study of the Total Tuning of the Feed Drive System in NC Machine Tools (2nd Report)-Single Axis Servo Parameter Tuning, Journal of the Japan Society of Precision Engineering, Vol. 61, No.2, 1995, 268-272.
• [4] KAKINO Y., MATSUBARA A., LI Z., UEDA D., NAKAGAWA H., TAKESHITA T., MARUYAMA H., A study of the Total Tuning of the Feed Drive System in NC Machine Tools (4th Report)-Multiple Axes Tuning, Journal of the Japan Society of Precision Engineering, Vol. 63, No.3, 1997, 368-372.
• [5] MOTIKA, R., CIGLAR, D., Optimization of feed drives for NC machine tools. Strojarstvo, Vol. 28, No.4, 1986, 229-233. (In Croatian).
• [6] PANDILOV, Z., Computer Aided Design of regulated drives for NC machine tools, M.Sc.Thesis, Faculty of Mechanical Engineering, Skopje, Macedonia, (In Macedonian), 1993.
• [7] PANDILOV Z., DUKOVSKI V., Computer aided design of numerically controlled machine tools drives, Annals of DAAAM for 2006 & Proceedings of the 17th INTERNATIONAL DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Mechatronics & Robotics", 8-11 th November, Vienna, Austria, 2006, 283-284.
• [8] PANDILOV Z., DUKOVSKI V., Analytical calculation of the CNC machines position loop gain. Journal of Achievements in Materials and Manufacturing Engineering, Vol. 23, Issue I, July 2007, 71 -74.
• [9] WECK M., Werkzeugmaschiiien und Fertigungssystenie, Band 3, Mechatronisch Systeme: Vorschuhantriebe and Processdiagnose. Springer, 2001