Analysis of glass gatherer robot's vibration damping using the original and modified design of the friction damper

• Autorzy: Stembalski Marek , Roszkowski Andrzej , Skoczynski Waclaw , Turek Pawel , Fenc Rafal

Identyfikatory

DOI

10.36897/jme/129926

• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of tests carried out on the glass robot’s lance equipped with a prototype friction damper. Two ways of mounting the damper (the original design and the modified design) are described. A series of experimental tests were carried out for each of the ways of mounting to determine the lance operating conditions at which the damper worked most efficiently. Resonance curves were determined for each of the designs and it was found that the modified structure reduced vibrations to a greater degree, which clearly indicates that the modified solution ensures a higher vibration damping efficiency.

Słowa kluczowe

EN

damping; friction damper; glass gatherer robot

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2020
• Tom: Vol. 20, No. 4
• Strony: 139--151
• Opis fizyczny: Bibliogr. 37 poz., rys.

Twórcy

autor

Stembalski Marek

• Wroclaw University of Science and Technology, Department of Machine Tools and Mechanical Technologies, Wroclaw, Poland

autor

Roszkowski Andrzej

• Wroclaw University of Science and Technology, Department of Machine Tools and Mechanical Technologies, Wroclaw, Poland

autor

Skoczynski Waclaw

• Wroclaw University of Science and Technology, Department of Machine Tools and Mechanical Technologies, Wroclaw, Poland

autor

Turek Pawel

• Wroclaw University of Science and Technology, Department of Machine Tools and Mechanical Technologies, Wroclaw, Poland

autor

Fenc Rafal

• Wroclaw University of Science and Technology, Department of Machine Tools and Mechanical Technologies, Wroclaw, Poland

Bibliografia

• [1] CHOROSZY T., MAREK B., ROSZKOWSKI A., SKOCZYŃSKI W., SZYMKOWSKI J., 2005, Measurement of Vibrations of Glass Robots During the Implementation of the Technological Cycle, Mechanical Review, LXIV, 9, 196–199.
• [2] SKOCZYŃSKI W., KRZYŻANOWSKI J., 2003, Dynamic Properties Testing of Glazier’s Robot Structure, Modern Trends in Manufacturing, Second International CAMT Conference, Wroclaw, 20–21 February 2003, Oficyna Wydawnicza PWr., 335–342.
• [3] ROSZKOWSKI A. 2008, Possibilities of Actively Influencing the Vibration Level of the Robot's Executive Team, PhD thesis, Wroclaw University of Science and Technology, Poland.
• [4] ROSZKOWSKI A., CHOROSZY T., SKOCZYŃSKI W., KRZYŻANOWSKI J., MAREK B., 2005, The Concept of the Test Stand for Measuring Vibration of a Glass Robot Lance with Adjustable Dampers, Mechanical Review, LXIV, 9, 240–244.
• [5] ROSZKOWSKI A., GÓRSKI P., CHOROSZY T., SKOCZYŃSKI W., KRZYŻANOWSKI J., 2006, Numerical Analysis and Experimental Verification of the Properties of the GLASS Robot Lance, Open-Mining, XLVIII, 7/8, 113–117.
• [6] STEMBALSKI M., SKOCZYŃSKI W., ROSZKOWSKI A., 2018, Semi-Active Vibration Damping System, Polish Patent No 227880, PCT No. P. 410145 from 18.11.2014 Publ. 01/03/2018.
• [7] MULLA I.H., BELEV B., 2002, Performance of Steel Frames with a New Friction Damper Device Under Earthquake Excitation, Engineering Structures, 24, 365–371.
• [8] ANKIREDDI S., YANG H.T.Y., 2000, Directional Mass Dampers for Buildings Under Wind or Seismic Loads, Journal of Wind Engineering and Industrial Aerodynamics, 85/2, 119–144.
• [9] DENG K., PAN P., WANG C., 2013, Development of Crawler Steel Damper for Bridges, Journal of Constructional Steel Research, 85, 140–150.
• [10] GOLAFSHANI A.A., GHOLIZAD A., 2009, Friction Damper for Vibration Control Offshore Steel Jacket Platforms, Journal of Constructional Steel Research, 65, 180–187.
• [11] HONG-NAN L., GANG L., 2007, Experimental Study of Structure with “Dual Function” Metallic Dampers, Engineering Structures, 29/8, 1917–1928.
• [12] KAREEM A., 1997, Modelling of Base-Isolated Building with Passive Dampers Under Winds, Journal of Wind Engineering and Industrial Aerodynamics, 72, 323–333.
• [13] QU W.L., CHEN Z.H., XU Y.L., 2001, Dynamic Analysis of Wind-Excited Trust Tower with Friction Dampers, Computers and Structures, 79, 2817–2831.
• [14] ROSZKOWSKI A., BOGDAN M., SKOCZYŃSKI W., MAREK B., 2008, Testing of the Viscosity of an MR Fluid in the Magnetic Field, Measurement Science Review, 8/3-3, 58–60.
• [15] ROSZKOWSKI A., SKOCZYŃSKI W., 2008, Glass Making Robot, Magnetorheological Fluid Damper, Inżynieria Maszyn, 13/3-4, 122–132, (in Polish).
• [16] BOSSIS G., LACIS S., MEUNIER A, VOLKOVA O., 2002, Magnetorheological Fluids, Journal of Magnetism and Magnetic Materials, 252, 224–228.
• [17] HOGSBERG J., KRENK S., 2008, Energy Dissipation Control of MagnetoRheological Damper, Probabilistic Engineering Mechanics, 23/1-2, 188–197.
• [18] KYUNG-IN J., BYUNG-KNOW M., JONGWON S., 2011, A Behavior Model of Magnetorheological Fluid on Direct Shear Mode, Journal of Magnetism and Magnetic Materials, 323/10, 1324–1329.
• [19] ZHU W.Q., DONG M.L.L., 2004, Semi-Active Control of Wind Excited Building Structures Using MR/ER Dampers, Probabilistic Engineering Mechanics, 19/3, 279–285.
• [20] CAO H., LI Q.S., 2004, New Control Strategies for Active Tuned Mass Damper System, Computers& Structures, 82/27, 2341–2350.
• [21] CHAE-WOOK L., 2008, Active Vibration Control of the Linear Structure with an Active Mass Damper Applying Robust Saturation Controller, Mechatronics, 18/8, 391–399.
• [22] SODANO H.A., INMAN D.J., 2007, Non Contact Vibration Control System Employing an Active Eddy Current Damper, Journal of Sound and Vibration, 305/4-5, 596–613.
• [23] CHAEWOOK L., 2008, Active Vibration Control of the Linear Structure with an Active Mass Damper Applying Robust Saturation Controller, Mechatronics, 18/8, 391–399.
• [24] KASANDRA M.E.F. MENDOZA H., KIRK R.G., WICKS A., 2004, Reduction of Subsynchronous Vibrations in a Singledisk Rotor Using an Active Magnetic Damper, Mechanics Research Communications, 31/6, 689–695.
• [25] KORLIN R., STAROSSEK U., 2007, Wind Tunnel Test of an Active Damper for Bridge Decks, Journal of Wind Engineering and Industrial Aerodynamics, 95/4, 267–277.
• [26] KOZANECKA D., KOZANECKA Z., ŁAGODZIŃSKI J., 2011, Active Magnetic Damper in a Power Transmission System, Communications in Nonlinear Science and Numerical Simulation, 16/5, 2273–2278.
• [27] OZBULUT O.E., BITARAF M., HURLEBAUS S., 2011, Adaptive Control of BaseIsolated Structures Against Near – Field Earthquakes Using Variable Friction Dampers, Engineering Structures, 33/12, 3143–3154.
• [28] XU Y.L., 1996, Parametric Study of Active Mass Dampers for Wind-Excited Tall Buildings, Engineering Structures, 18/1, 64–76.
• [29] YOSHIDA H., HIROSE E., SAKAGAMI Y., 1999, Active Damper of Magnetically Suspended Pellet for Laser Fusion Scheme, Fusion Engineering and Design, 44/1–4, 467–470.
• [30] ORMAN M., SNAMINA J., 2009, Comparison of the Effectiveness of Semi-active and Active Vibration Dampers on the Example of Ropes, Journal of Technical Mechanics, 106/3, 71–83.
• [31] OSIŃSKI Z., 1997, Vibration Suppression, PWN Scientific Publishing House, Warsaw.
• [32] SKUP Z,. 2010, Nonlinear Suppression Phenomena, Publishing House of Warsaw University of Technology, Warsaw.
• [33] SKUP Z., 2010, Analysis of Damping of Vibrations Through a Frictional Damper, Journal of Theoretical and Applied Mechanics, 48, 465–478.
• [34] STEMBALSKI M., PREŚ P., SKOCZYŃSKI W., TUREK P., 2018, Modelling of a Glass Gatherer Robot Arm with Frictional Damper, Journal of Machine Engineering, 18/4, 127–140.
• [35] STEMBALSKI M., SKOCZYŃSKI W., ROSZKOWSKI A., 2012, Numerical Model of Frictional Damper for Glass Making Robot Lance, Journal of Kones, 19/1, 391–398.
• [36] STEMBALSKI M., SKOCZYŃSKI W., ROSZKOWSKI A., PREŚ P., 2017, Testing the Vibration Damping of a Glass Gatherer Robot Arm Using a Friction Damper, Archives of Civil and Mechanical Engineering, 17/2, 240–248.
• [37] STEMBALSKI M., 2013, Modeling and Testing of a Friction Damper Applied to a Glass Robot, PhD Thesis, Wroclaw University of Science and Technology, Poland.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).