PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

New mud for hydrogeological drilling

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
A major source of valued water are groundwater deposits. Therefore, constantly growing water demand requires greater focus on the subject of hydrogeological drilling. The primary requirements for groundwater drilling are: protection of important aquifers as well as formations being drilled and further easy removal of the mud residues during well development. Both aspects are connected to mud ingredients and additives selection. This necessitates an improvement of drilling fluid formula for most effective borehole drilling and successive exploitation. This article concentrates on the drilling fluid for hydrogeological drilling. In order to validate the practical utility of developed mud, laboratory research was conducted. An analyses of the outcomes expose the mud improving drilling process and fulfilling above mentioned requirements
Rocznik
Strony
819--828
Opis fizyczny
Bibliogr. 10 poz., wykr.
Twórcy
autor
  • AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Drilling, Oil and Gas – PhD Student, Krakow, Poland
Bibliografia
  • [1] Gonet A., Macuda J.: Wiertnictwo hydrogeologiczne. Wydawnictwa AGH, Kraków 2004.
  • [2] http://www.glossary.oilfi eld.slb.com/ [Access 2016.05.05].
  • [3] Bielewicz D.: Płyny wiertnicze. Wydawnictwa AGH, Kraków 2009.
  • [4] Kleespies M.: Drilling Fluids: Proper Grouting Protects Groundwater. National Driller, 01.03.2014, http://www.nationaldriller.com/articles/89422-drilling-fluids-proper-grouting-protects-groundwater [Access 2016.05.05].
  • [5] Gonet A. et al.: Instrukcja obsługi wierceń hydrogeologicznych. Wydawnictwa AGH, Kraków 2011.
  • [6] http://www.welldrillingschool.com/courses/pdf/DrillingMethods.pdf [Access 2016.05.05].
  • [7] Oliver B.: Drilling Fluids: Designing a Drilling Fluid for Successful Well Completions. National Driller, 01.11.2011, http://www.nationaldriller.com/articles/88664-drilling-fluids-designing-a-drilling-fluid-for-successful-well-completions [Access 2016.05.05].
  • [8] http://bdc.com.pl/pl/produkty/53/Mikhart/ [Access 2016.04.20].
  • [9] API Specification 13B-2, 5th edition, April 2014.
  • [10] Skrzypaszek K.: Program „rheo solution” jako komputerowe narzędzie doboru modelu reologicznego cieczy wiertniczych. Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław 2004.
Uwagi
EN
The work realized within research program BLUE-GAS Polski Gaz Łupkowy, No. 17.17.190.86920
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-63220ead-0338-43f1-9497-408bfc7f5218
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.