Application of the MODAPTS Method with Inovative Solutions in the Warping Process

• Autorzy: Šabarić I. , Brnada S. , Kovačević S.

Warianty tytułu

PL

Zastosowanie metody MODAPTS i innowacyjne rozwiązanie w procesie snucia

• Języki publikacji: EN

Abstrakty

EN

The paper presents some general features of the MODAPTS (Modular Arrangement of Predetermined Time Standards) method and its application in the warping process during making fabrics. The labour of the worker in extra warping jobs was analysed by means of the movements and load and the MODAPTS method was used to analyse the efficiency of the operator’s movements. This workplace was chosen for the analysis because it requires manual work where the body moves continuously and is subjected to exceptional loads; in most cases female workers perform these jobs. By use of the MODAPTS method every body movement and body part were analysed. The improvement was investigated by using a special transportation cart which can lift or lower bobbins to the height of the mounting of supply packages in a creel and carrying several bobbins at the same time. According to the results obtained and innovative solutions that can be applied as an additional tool, an easier, safer and more efficient work procedure for the same scope of work was obtained.

PL

W artykule przedstawiono ogólne właściwości systemu MODAPTS i jego zastosowanie w procesie snucia przy produkcji tkanin. Przeanalizowano prace obsługi podczas snucia na podstawie ruchów i obciążeń. Zagadnienie to jest ważne m.in. dlatego, że pracownikami są na ogół kobiety. Udoskonalenia badano stosując specjalne wózki transportowe, które mogą podnosić i opuszczać nawoje aż do poziomu ramy natykowej. Na podstawie wyników badań opracowano system, który jest bezpieczniejszy, łatwiejszy do stosowania i bardziej wydajny.

Słowa kluczowe

EN

warping; manual work; body movements; body load; MODAPTS method; mounting supply packages; creel

PL

proces snucia; ręczna praca; ruchy ciała; obciążenie ciała; system MODAPTS; montaż pakietów zasilających; system creel

• Wydawca: Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
• Czasopismo: Fibres & Textiles in Eastern Europe
• Rocznik: 2013
• Tom: Vol. 21, no. 4 (100)
• Strony: 55--59
• Opis fizyczny: Bibliogr. 8 poz., rys., tab.

Twórcy

autor

Šabarić I.

• Faculty of Textile Technology, University of Zagreb, Zagreb, Croatia

autor

Brnada S.

• Faculty of Textile Technology, University of Zagreb, Zagreb, Croatia

autor

Kovačević S.

• Faculty of Textile Technology, University of Zagreb, Zagreb, Croatia

Bibliografia

• 1. International MODAPTS Association, Inc. Kalamazoo, MI: MODAPTS http://www.modapts.org/bylaws.htm, 25.05.2012.
• 2. Brnada S, Šabarić I, Kovačević S. Application of Modapts Method in the Warping Process. In: 4th International Conference, ERGONOMICS 2010, Stubicke Toplice, Croatia, 30 June - 03 July 2010, pp. 143-150.
• 3. Karger Delmar W, Franklin Bayha H. Engineereng Work Measurement. Industrial press Inc., New York, 1987.
• 4. Hirano H. 4S for Operators - 5 Pillars of the Visual Workplace, Productivity Press, Portland, Oregon, 1996.
• 5. Kobayashi I. Material, Notes and Papers. PPORF Development Institute, Japan, 1996.
• 6. Kovačević S, Penava Ž, Oljača M. Optimisation of Production Costs and Fabric Quality. Fibres & Textiles in Eastern Europe 2006; 14, 2: 40-48.
• 7. Kovačević S, Orešković V. Time Analysis in the Preparatory Operations of Warp and Weaving. Fibres & Textiles in Eastern Europe 1999; 7, 4: 50-53.
• 8. Kovačević S. Analysis of Operator`s Work on Conventional and Modern Machines in Mechanical Processing of textiles. Tekstil 2001; 50, 7: 245-250.