Modeling Viscosity of Converter Slag

• Autorzy: Sinelnikov V. , Kalisz D.

Warianty tytułu

PL

Modelowanie lepkości żużla konwertorowego

• Języki publikacji: EN

Abstrakty

EN

The paper is devoted to one of the most important factors influencing steel melting and operation of an oxygen converter, i.e. dynamic viscosity of slag. Knowing typical chemical composition of slag after melting, the viscosity was calculated with the use of Riboud and Urbain empirical models at temperatures 1400 °C to 1700 °C. The obtained mathematical results were compared with the results of simulations obtained with the FactSage program. The discrepancies between these results were caused by model assumptions and the fact that slag in lower temperatures consisted of liquid and solid phases.

PL

Obecna praca poświęcona jest jednemu z najważniejszych czynników wpływających na pracę konwertora tlenowego - lepkości dynamicznej żużla. Znając typowy skład chemiczny żużla uzyskany po wytopie w piecu wykonano obliczenia lepkości żużla przy pomocy empirycznych modeli Ribouda i Urbaina w zakresie temperatur od 1400 °C do 1700 °C. Wykonano również analizę porównawczą wyników obliczeń przy pomocy modeli z wynikami symulacji uzyskanymi z kalkulacji wykonanych za pomocą programu FactSage.

Słowa kluczowe

EN

viscosity modeling; converter slag; FactSage programme

PL

modelowanie lepkości; żużel konwertorowy; program FactSage

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 4 spec.
• Strony: 119--124
• Opis fizyczny: Bibliogr. 15 poz., tab., wykr.

Twórcy

autor

Sinelnikov V.

• AGH University of Science and Technology, Department of Foundry Engineering, ul. Reymonta 23, 30-059 Kraków, Poland

autor

Kalisz D.

• AGH University of Science and Technology, Department of Foundry Engineering, ul. Reymonta 23, 30-059 Kraków, Poland

Bibliografia

• [1] Ciechanowska, M. & Pieprzyca, J. (2014). Model research of the maintenance of the refractory lining of the BOF with "slag splashing" method. Hutnik Wiadomości Hutnicze. 81, 136-141.
• [2] Kharlashin, P.S., Sinelnikov V.O. & Kadhim A.M. (2015). On maximizing oxygen converters lining life. Reporter of the Priazovskyi State Technical University. 30 (vol.1), 80-89.
• [3] Kalisz, D. (2012). Viscosity calculation of mold slag in continuous casting. Archives of Materials Science and Engineering. 58, 164-170.
• [4] Kalisz, D. (2013). Influence of casting mold slag on the progress of casting process. Archives of Metallurgy and Materials. 58, 35-41. DOI: 10.2478/v10172-012-0147-8.
• [5] Kalisz, D. (2014). Modeling physicochemical properties of mold slag. Archives of Metallurgy and Materials. 59, 149-155.
• [6] Mills, K.C. (2011). The estimation of slag properties. Department of Materials, Imperial College, London, UK.
• [7] Mills, K.C. (2011). Estimating the physical properties of slags. The Journal of the Southern African Institute of Mining and Metallurgy. 111, 649-658.
• [8] Rosypalova, S., Řehačkova, L., Dobrovska J., Dudek, R., Dobrovsky, L., Žaludova, M. & Smetana, B. (2014). Verification of mathematical models for calculation of viscosity of molten oxide systems. Metalurgija. 53, 379-382.
• [9] Kekkonen, M., Oghbasilasie, H. & Louhenkilpi, S. (2012). Viscosity models for molten slags. Aalto University publication series. Science + technology, Helsinki, Finland.
• [10] Iida, T., Sakai, H., Kita, Y. & Shigeno, K. (2000). An Equation for Accurate Prediction of the Viscosities of Blast Furnace Type Slags from Chemical Composition. ISIj International. 40, 110-114.
• [11] Elahipanah, Z. (2012). Thermo-Physical Properties of Mould Flux Slags for Continuous Casting of Steel. Royal Institute of Technology.
• [12] Mills, K.C. (1993). The Influence of Structure on the Physico-chemical Properties of Slags. ISIJ international. 33 (vol.1), 148-155.
• [13] Suzuki, M. and Jak, E. (2011). Revision of Quasi-chemical Viscosity Model to Predict Viscosity of Molten Slag in Multicomponent Oxide Systems related to Metallurgical Processes. High Temperature Processing Symposium 2011. Swinburne University of Technology, Melbourne, Australia.
• [14] Forsbacka, L., Holappa, L., Kondratiev, A. & Jak, E. (2007). Experimental Study and Modelling of Chromium Containing Slags. Steel Research International. 9, 676-684.
• [15] Mills, K. C. (1995). Viscosities of molten slags. Slag Atlas 2nd edition, Dusseldorf, Germany. 349-402.