Low to middle vibro-acoustic noise prediction in ship cabin by using plate-cavity coupling model

• Autorzy: Zhou Z. , Wu J.

Identyfikatory

DOI

10.2478/pomr-2018-0086

• Języki publikacji: EN

Abstrakty

EN

A plate-cavity coupling method based on modal expansion technique in the closed sound cavity was introduced, aiming at ship cabin structural noise. Using this method, a coupled equation was established. The structural vibration acceleration of the target cabin was extracted from a ship vibration response calculation, applied to the model. Then the target cabin noise value was obtained through numerical calculation. The effectiveness and reliability of the method were validated through experiments. The coupled model predicts noise in the cabin does not require fluid finite element model of the cabin air, thus greatly reducing the calculation time compared with the pure finite element method. It was shown that the method is suitable for the calculation of noise in a single ship cabin; the method has a high calculation efficiency. Furthermore, the calculated result is a continuum. On the one hand, it can be conveniently converted to an octave or 1/3 octave according to the specification. On the other hand, the form of the continuum also provides a corresponding response to the subsequent vibration and noise control.

Słowa kluczowe

EN

low to middle frequencies; vibration; ship noise; analysis model; rapid calculation method

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2018
• Tom: S 2
• Strony: 149--157
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Zhou Z.

• School of Civil Engineering and Transportation, South China University of Technology

autor

Wu J.

• School of Civil Engineering and Transportation, South China University of Technology

Bibliografia

• 1. Kurt, R. E., Khalid, H., Turan, O., Houben M., Bos J., and Helvacioglu I. H.: Towards human-oriented norms: Considering the effects of noise exposure on board ships, Ocean Eng., Vol. 120, pp. 101–107, Jul. 2016.
• 2. Kurt, R.E., McKenna, S. A., Gunbeyaz, S.A., Turan, O.: Investigation of occupational noise exposure in a ship recycling yard, Ocean Engineering., Vol. 137 , pp. 440-449, Mar. 2017.
• 3. Ou, L.J., Li, D.Y., Ou, J.M., Xu, H.X.: Prediction and Analysis of Ship Noise based on VA One, Guangdong Shipbuilding, Vol. 143, no. 3, pp. 28-31, 2015.
• 4. Pang, F.Z., Yao, X.L.: Numerical Research on Truncated Model Method of Ship Structural Borne Noise Prediction. Harbin: Harbin Engineering University, 2012.
• 5. Gao, C., Yang, D.Q.: Vibroacoustical Entropy Weighted Graph Method Transmission Path Analysis of Ship Cabin Noise, JOURNAL OF SHANGHAI JIAO TONG UNIVERSITY, Vol. 48, no. 4, pp. 469-474, 2014.
• 6. Sun, Z.H., Wang, D., Yu, Y., Zhang, S.J.: Engineering Prediction Approach for Shipboard Cabin Noise, SHIP ENGINEERING, Vol, 36, pp. 246-251, 2014.
• 7. Yao, X.L., Dai, W., Tang Y.S.: Grey Prediction of Ship Superstructure Cabins’ Noise. SHIP BUILDING OF CHINA, Vol. 47, no. 1, pp. 35-42, 2006.
• 8. Gui, Y.: Prediction of Cabin Noise based on Grey System Theory and Reduction Technology Research. SHIP ENGINEERING, Vol. 36, no. s1, pp. 243-245, 2014.
• 9. Zhou, J., Bhaskar A., Zhang X.: Sound transmission through a double-panel construction lined with poroelastic material in the presence of mean flow, J. Sound Vib., Vol. 332, no. 16, pp. 3724–3734, Aug. 2013.
• 10. G A. R., Sarathchandradas, M. R.: Study and Analysis of Sound Transmission through Multilayered Structures Using Generalized Matrix Method, Int. J. Emerg. Res. Manag. &Technology, Vol. 4, no. 11, pp. 119–125, 2015.
• 11. Alimonti, L., Atalla, N., Berry, A., Sgard, F.: A hybrid finite element–transfer matrix model for vibroacoustic systems with flat and homogeneous acoustic treatments, J. Acoust. Soc. Am., vol. 137, no. 2, pp. 976–988, Feb. 2015.
• 12. Yu, D.P., Zhao, D.Y., Wang Y.: Influence of damped material and the ship model of acoustic on the ship cabin noise, Journal of Ship Mechanics, Vol. 14, no. 5, pp. 539-548, 2010.
• 13. Liu X.M., Wang, X.Y., Chen, C.H.: Numerical analysis of low and middle frequency noise in ship cabin using fluidstructure coupling, Journal of Ship Mechanics, Vol. 12, no. 5, pp. 812-818, 2008.
• 14. Taylor, R.L., Govindjee, S.: Solution of clamped rectangular plate problems, Commun. Numer. Methods Eng., Vol. 20, no. 10, pp. 757–765, Jul. 2004.
• 15. LI, W.L., Daniels, M.: A Fourier series method for the vibrations of elastically restrained plates arbitrarily loaded with springs and masses, J. Sound Vib., Vol. 252, no. 4, pp. 768–781, May 2002.
• 16. Li, W.L., Zhang, X.F., Du, J.T., Liu, Z.G.: An exact series solution for the transverse vibration of rectangular plates with general elastic boundary supports, J. Sound Vib., Vol. 321, no. 1–2, pp. 254–269, Mar. 2009.
• 17. Zhong, Y., Zhang, Y.S.: Free vibration analysis of a thin plate with completely suppor ted by finite cosine integral transform method, Journal of Ship Mechanics Vol. 12, no. 2, pp. 305-310, 2008.
• 18. Xin, F.X., Lu, T.J., Chen, C.Q.: Vibroacoustic behavior of clamp mounted double-panel partition with enclosure air cavity, J. Acoust. Soc. Am., Vol. 124, no. 6, pp. 3604–3612, Dec. 2008.
• 19. Xin, F.X., Lu, T.J.: Analytical and experimental investigation on transmission loss of clamped double panels: Implication of boundary effects, J. Acoust. Soc. Am., Vol. 125, no. 3, pp. 1506–1517, Mar. 2009.
• 20. Cummings, A.: The effects of a resonator array on the sound field in a cavity, J. Sound Vib., Vol. 154, no. 1, pp. 25–44, Apr. 1992.
• 21. Li, H., Li, G.: Component mode synthesis approaches for quantum mechanical electrostatic analysis of nanoscale devices, J. Comput. Electron., Vol. 10, no. 3, pp. 300–313, Sep. 2011.
• 22. Li, X.Q., Deng, Z.X., Li, C.B., Zhang, J.C, Li, Y.Q.: Substructure Normal Modes Selection Method for Component Mode Synthesis, JOURNAL OF SOUTHWEST JIAOTONG UNIVERSITY, Vol. 49, no. 1, pp. 173–178, 2014.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).