Surface topography effect on strength of lap adhesive joints after mechanical pre-treatment

• Autorzy: Zielecki W. , Pawlus P. , Perłowski R. , Dzierwa A.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the analysis of the effect of surface topography on shear strength of lap adhesive joints from steel S235JR. Steel surfaces were prepared to bond with various methods of mechanical treatment. It was found after using the linear correlation method that strengthening properties of tested joints are strongly correlated with hybrid surface topography parameters. Shear strength of milled adherends can be increased as a result of subsequent grit blasting.

Słowa kluczowe

EN

surface topography; adhesive joints; shear resistance

PL

topografia powierzchni; odporność na ścinanie; stal; obróbka mechaniczna

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2013
• Tom: Vol. 13, no. 2
• Strony: 175--185
• Opis fizyczny: Bibliogr. 18 poz., rys., tab., wykr.

Twórcy

autor

Zielecki W.

• Rzeszow University of Technology, 35-959 Rzeszów, W. Pola 2, Poland

autor

Pawlus P.

• Rzeszow University of Technology, 35-959 Rzeszów, W. Pola 2, Poland

autor

Perłowski R.

• Rzeszow University of Technology, 35-959 Rzeszów, W. Pola 2, Poland

autor

Dzierwa A.

• Rzeszow University of Technology, 35-959 Rzeszów, W. Pola 2, Poland

Bibliografia

• [1] D. Mazurkiewicz, Problems of identification of strength properties of rubber materials for purposes of numerical analysis: a review, Archives of Civil and Mechanical Engineering X/1 (2010) 69–84.
• [2] Z. Mirski, T. Piwowarczyk, Composite adhesive joints of hardmetals with steel, Archives of Civil and Mechanical Engineering X/3 (2010) 83–94.
• [3] Z. Mirski, T. Piwowarczyk, Analysis of adhesive properties of B2 hardmetal surface, Archives of Civil and Mechanical Engineering IX/2 (2009) 94–104.
• [4] A.F. Harris, A. Beevers, The effect of grit-blasting on surface properties for adhesion, International Journal of Adhesion and Adhesives 19 (1999) 445–452.
• [5] T.R. Katona, S.C. Batterman, Surface roughness effects on the stress analysis of adhesive joints, International Journal of Adhesion and Adhesives 3/2 (1982) 85–91.
• [6] M. Shahid, S.A. Hashin, Effect of surface roughness on the strength of cleavage joints, International Journal of Adhesion and Adhesives 22 (2002) 235–244.
• [7] A.M.G. Pinto, A. Magalhaes, F.G. da Silva, A.P.M. Baptista, Shear strength of adhesively bonded polyolefins with minimal surface preparation, International Journal of Adhesion and Adhesives 28 (2008) 452–456.
• [8] L.F.M. da Silva, N.M.A.J. Ferreira, V. Richter-Trummer, E.A.S. Marques, Effect of grooves on the strength of adhesively bonded joints, International Journal of Adhesion and Adhesives 30 (2010) 735–743.
• [9] A.M. Pereira, N.M.A.J. Ferreira, F.V. Antunes, P.J. Bartolo, Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints, Journal of Materials Processing Technology 210 (2010) 610–617.
• [10] C. Borsellino, G. di Bella, V.F. Russi, Adhesive joining of aluminium AA6082: the effect of resin and surface treatment, International Journal of Adhesion and Adhesives 29 (2009) 36–44.
• [11] L.F.M. da Silva, R.J.C. Carbas, G.W. Critchlow, M.A.V. Figuereido, K. Brown, Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints, International Journal of Adhesion and Adhesives 29 (2009) 621–632.
• [12] J.W. Kwon, D.G. Lee, The effect of surface roughness and bond thickness on the fatigue life of adhesively bonded tabular single lap joints, Journal of Adhesion Science and Technology 14 (2000) 1085–1102.
• [13] K. Uehara, M. Sakurai, Bonding strength of adhesives and surface roughness of joined parts, Journal of Materials Processing Technology 127 (2002) 178–181.
• [14] T. Sekercioglu, H. Rende, A. Gulsoz, C. Meran, The effects of surface roughness on the strength of adhesively Bondem cylindrical components, Journal of Materials Processing Technology 142 (2003) 82–86.
• [15] E.G. Baburai, D. Starikov, J. Evans, G.A. Shafeev, A. Bensaoula, Enhancement of adhesive joint by laser surface modification, International Journal of Adhesion and Adhesives 27 (2007) 268–276.
• [16] S.G. Prolongo, A. Urena, Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints, International Journal of Adhesion and Adhesives 29 (2009) 23–51.
• [17] E.M. Petrie, Handbook of Adhesives and Sealants, McGraw-Hill Professional, New York, 2006.
• [18] A. Pizzi, K.L. Mittal, Handbook of Adhesive Technology, Marcel Dekker Inc., New York, 2003.