A device for testing of the tribological properties of interverebral disc endoprosthesis - SBT-03.1 simulator

• Autorzy: Mróz A. , Wiśniewski T. , Gierzyńska-Dolna M. , Magda J.
• Języki publikacji: EN

Abstrakty

EN

As a result of research conducted in the Metal Forming Institute in Poznan, SBT-03 simulator for friction and wear testing of human intervertebral disc endoprostheses was modernized. The structure of the device allows reflecting of the range of mobility and loads present in the natural spine. Moreover, the device allows recording and measurement of such parameters as axial compression force, moment of friction, temperature in the friction loop and number of operation cycles. This enables an evaluation of the intensity of wear processes of different designs of structures of a lumbar spine intervertebral disc endoprostheses depending on the type of materials used and production method.

Słowa kluczowe

EN

intervertebral disc endoprosthesis of the spine; friction and wear tests; SBT-03.1 simulator; friction coefficient

• Wydawca: Polish Society for Biomaterials in Cracow
• Czasopismo: Engineering of Biomaterials
• Rocznik: 2012
• Tom: Vol. 15, no. 116-117 spec. iss.
• Strony: 5--6
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Mróz A.

• Metal Forming Institute, 14th Jana Pawla II Str., 61-139 Poznan, Poland

autor

Wiśniewski T.

• Metal Forming Institute, 14th Jana Pawla II Str., 61-139 Poznan, Poland

autor

Gierzyńska-Dolna M.

• Metal Forming Institute, 14th Jana Pawla II Str., 61-139 Poznan, Poland

autor

Magda J.

• Metal Forming Institute, 14th Jana Pawla II Str., 61-139 Poznan, Poland

Bibliografia

• [1] Whatley B.R., Wen X., Intervertebral disc (IVD): Structure, degeneration, repair and regeneration, Materials Science and Engineering, 32 (2012) 61-77.
• [2] Van den Eerenbeemt K. D., Ostelo R. W., Van Royen B. J., Peul W. C., Van Tulder, Total disc replacement surgery for symptomatic degenerative lumbar disc disease: a systematic review of the literature, Euro Spine Journal, 19, 8, (2010) 1262-1280.
• [3] Nowakowski A., Cabaj M., Kubaszewski Ł., Endoprotezoplastyka krążka międzykręgowego w części lędźwiowej kręgosłupa - doświadczenia wstępne, Neuroortopedia, 5, 1, (2003), 58-61.
• [4] Gierzyńska-Dolna M., Lijewski M., Zastosowanie tytanu i jego stopów w implantologii i inżynierii biomedycznej, Inżynieria Materiałowa (accepted for print).
• [5] http://www.synthes.com.
• [6] Nachemson A. L., An orhopaedic challenge, Spine, 1, 1 (1976), 59-71.
• [7] Gierzyńska-Dolna M., Biotribologia, Częstochowa, 2002.

Uwagi

EN

The Development Project titled "Intervertebral disc endoprosthesis - structure, tests, production technology and preparation for clinical applications" No. 13-004-10 is funded by the National Center of Research and Development with the use of public funds allocated to science.