The methodology of grade of gasification reactor effectivity

• Autorzy: Jagiełło A. , Magdziak-Tokłowicz M. , Górniak A. , Trzmiel K. , Włostowski R. , Wróbel R.

Identyfikatory

DOI

10.5604/12314005.1168454

• Języki publikacji: EN

Abstrakty

EN

Ecology problems are addressed in all areas of engineering. Gasification is widely used methodology, which allows to power vehicles and fuel generators via alternative fuel. The more it seems important to address the issues of gasification in the group of scientists dealing with machines. In article authors present results of methodology in effectivity of gasification graduation. The base of experiment is the complimentary reactor, which was made for gasification of different materials. Gases that are achieved on the output of the system are used to supply combustion engines. In article, expect mentioned methodology, authors present reactor build and measurement (including complimentary software) system, mounted on system. The new energy supplies are still discovered. At the same time, researchers on good know substances are in progress. In article, authors are presented one of the methods of gasification reactor effectivity. Authors’ reactor has a burning chamber, and outlet circuit. Presented methodology was relayed on E-E system with software part. System is contained a few thermocouples with multiplexing ADC card for acquisition of data. All parts are presented in an article. An article is a result of progressing grant in DEMONSTRATOR+ program (no. WND-DEM-1-527/001).

Słowa kluczowe

EN

gasification; reactor; process effectivity

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2015
• Tom: Vol. 22, No. 4
• Strony: 109--116
• Opis fizyczny: Bibliogr 6 poz., rys.

Twórcy

autor

Jagiełło A.

• Wroclaw University of Technology Faculty of Architecture Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland tel.: [phone]

autor

Magdziak-Tokłowicz M.

• Wroclaw University of Technology Mechanical Department Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland tel.: [phone]

autor

Górniak A.

• Wroclaw University of Technology Mechanical Department Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland tel.: [phone]

autor

Trzmiel K.

• Wroclaw University of Technology Mechanical Department Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland tel.: [phone]

autor

Włostowski R.

• Wroclaw University of Technology Mechanical Department Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland tel.: [phone]

autor

Wróbel R.

• Wroclaw University of Technology Mechanical Department Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland tel.: [phone]

Bibliografia

• [1] Michalski, L., Eckersdorf, K., Kucharski, J., Termometria. Przyrządy i metody, Politechnika Łódzka, Lodz 1998.
• [2] Rząsa, M. R., Kiczma, B., Elektryczne i elektroniczne czujniki temperatury, WKŁ Warszawa 2005.
• [3] Smith, S. W., Digital Signal Processing, California Technical Publishing, 2008.
• [4] Kehtarnavaz, N., Digital signal processing system-level design using LabVIEW, Newnes, 2005.
• [5] Beloborodko, A., Timma, L., Zandeckis, A., Romagnoli, F., The regression model for the evaluation of the quality parameters for pellets, Agronomy Research, 2012.
• [6] Uzun, B. B., Kanmaz, G., Effect of operating parameters on bio-fuel production from waste furniture sawdust, Pubmed.gov, Waste Manaq Res., Apr. 2013.