Corrosion Resistance of Nitrogen-Doped DLC Coatings Produced in Glow Discharge Conditions on Nitrided Austenitic Steel

• Autorzy: Borowski T. , Spychalski M. , Rożniatowski K. , Kulikowski K.

Identyfikatory

DOI

10.24425/amm.2020.133231

• Języki publikacji: EN

Abstrakty

EN

Nitrogen-doped DLC (diamond-like carbon) coatings were produced on 316L nitrided austenitic steel in direct current and pulsed glow discharge conditions. The chemical composition, surface topography, hardness and corrosion resistance of the obtained carbon coatings were examined. The coatings varied in surface morphology, roughness and hardness. Direct current glow discharge made it possible to produce a coating characterized by lower hardness, greater thickness and higher nitrogen content. The coating featured improved corrosion resistance and adhesion compared to coatings produced in the pulsed process.

Słowa kluczowe

EN

DLC coating; nitrided layer; DC; pulsed glow discharge; corrosion; adhesion

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 3
• Strony: 1141--1146
• Opis fizyczny: Bibliogr. 30 poz., fot., rys., tab.

Twórcy

autor

Borowski T.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Wołoska Str., 02-507 Warszawa, Poland

autor

Spychalski M.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Wołoska Str., 02-507 Warszawa, Poland

autor

Rożniatowski K.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Wołoska Str., 02-507 Warszawa, Poland

autor

Kulikowski K.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Wołoska Str., 02-507 Warszawa, Poland

Bibliografia

• [1] H. Moriguchi, H. Ohara, M. Tsujioka, Sei Technical Review 82, 52-58 (2016).
• [2] F.-D. Duminica, R. Belchi, L. Libralesso, D. Mercier, Surf. Coat. Tech. 337, 396-403 (2018).
• [3] Y. Ye, Y. Wang, X. Ma, D. Zhang, L. Wang, X. Li, Diam. Relat. Mater. 79, 70-78 (2017).
• [4] Y. JuJo, T. Fei Zhang, M. Jun Son, K. Ho Kim, Appl. Surf. Sci.433, 1184-1191 (2018).
• [5] M. Tarnowski, K. Kulikowski, T. Borowski, B. Rajchel, T. Wierzchoń, Diam. Relat. Mater. 75, 123-130 (2017).
• [6] J. Witkowska, A. Sowińska, E. Czarnowska, T. Płociński, T. Borowski, T. Wierzchoń, Appl. Surf. Sci. 421, 89-96 (2017).
• [7] T. Borowski, M. Ossowski, P. Kowalczyk, M. Dubek, A. Brojanowska, K. Rożniatowski, Mater. Sci.-Medzg. 22, 323-329 (2016).
• [8] S. Baragetti, E. Borzini, Ž. Božic, E. V. Arcieri, Eng. Fail. Anal. 102, 219-225 (2019).
• [9] T. F. Zhang, Q. Y. Deng, B. Liu, B. J. Wu, F. J. Jing, Y. X. Leng, N. Huang, Surf. Coat. Tech. 273, 12-19 (2015).
• [10] S. C. Ray, D. Mukherjee, S. Sarma, G. Bhattacharya, A. Mathur, S. S. Roy, J. A. McLaughlin, Diam. Relat. Mater. 80, 59-63 (2017).
• [11] R. Asakawa, S. Nagashima, Y. Nakamura, T. Hasebe, T. Suzuki, A. Hotta, Surf. Coat . Tech. 206, 676-685 (2011).
• [12] L. Huang, J. Yuan, Ch. Li, D. Hong, Surf. Coat. Tech. 353, 163-170 (2018).
• [13] M. H. Ghasemi, B. Ghasemi, H. R. M. Semnani, Diam. Relat. Mater. 93, 8-15 (2019).
• [14] M. Grein, R. Bandorf, K. Schiffmann, G. Bräuer, Surf. Coat. Tech. 357, 273-279 (2019).
• [15] R. D. Mansano, R . Ruas, A. P. Mousinho, L. S. Zambom, T. J. A. Pinto, L. H. Amoedo, M. Massi, Surf. Coat. Tech. 202, 2813-2816 (2008).
• [16] N. Kristiina Manninena, R. Escobar Galindo, S. Carvalho, A. Cavaleiro, Surf. Coat. Tech. 267, 90-97 (2015).
• [17] S. N. Robertson, D. Gibson, W. G. MacKay, S. Reid, C. Williams, R. Birney, Surf. Coat. Tech. 314, 72-78 (2017).
• [18] O. Sharifahmadian, F. Mahboub, Ceram. Int. 45, 7736-7742 (2019).
• [19] J. Corona-Gomez, S. Shiri, M. Mohammadtaheri, Q. Yang, Surf. Coat. Tech. 332, 120-127 (2017).
• [20] Z. Ruijun, M. Hongtao, J. Mater. Sci. 41, 1705-1709(2006).
• [21] O. Sharifahmadian, M. Farzad, S. Yazdani, Diam. Relat. Mater. 95, 60-70 (2019).
• [22] Sekhar C. Ray, W. F. Pongb, P. Papakonstantinou, Thin Solid Films 610, 42-47 (2016).
• [23] S. Srinivasan, Y. Tang, Y. S. Li, Q. Yang, A. Hirose, Appl. Surf. Sci. 258, 8094-8099 (2012).
• [24] D. Bociaga, P. Komorowski, D. Batory, W. Szymanski, A. Olejnik, K. Jastrzebski, W. Jakubowski, Appl. Surf. Sci. 355, 388-397 (2015).
• [25] T. Borowski, B. Adamczyk-Cieślak, A. Brojanowska, K. Kulikowski, T. Wierzchoń, Mater. Sci.-Medzg. 21, 376-381 (2015).
• [26] Z. Cheng, C. X. Li, H. Dong, T. Bell, Surf. Coat. Tech. 191, 195-200 (2005).
• [27] M. Azzia, M. Paquette, J. A. Szpunar, J. E. Klemberg-Sapieha, L. Martinu, Wear 267, 860-866 (2009).
• [28] M. Azzi, P. Amirault, M. Paquette, J. E. Klemberg-Sapieha, L. Martinu, Surf. Coat. Tech. 204, 3986-3994 (2010).
• [29] V. Shankar Dhandapani, E. Thangavel, M. Arumugam, K. S. Shin, V. Veeraraghavan, S. Y. Yau, C. Kim, D.-E. Kim, Surf. Coat. Tech. 240, 128-136 (2014).
• [30] E. L. Dalibón, L. Escalada, S. Simison, C. Forsich, D. Heim, S. P. Brühl, Surf. Coat. Tech. 312, 101-109 (2017).

Uwagi

EN

1. This work was supported by The National Science Centre [grant No. 2012/07/D/ST8/02599]

PL

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).