Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Purpose: A new approach to production process by direct integration of the RFID (Radio-frequency identification) chips into the composite parts used during the manufacturing (moulding) process of the composite parts has been presented. This research aims a new application of RFID technology and measurement of the resistance of RFID chips integrated into composite parts under X-ray diffraction beams and also impact choc (crash test). This work gives the actual results of an applied research carried out in laboratory (Supmeca-Paris) scale and also in industrial scales carried out in the manufacturing department of the French aeronautic company (Eurocopter-Paris). Design/methodology/approach: Application of RFID technology in manufacturing of the composite parts is related to the continuous quality improvement of manufacturing company. Findings: RFID Chips integrated directly in the composite parts during the manufacturing process can improve the efficiency of the manufacturing process and also decrease the lead time and processing time. This application in manufacturing of the composite parts will enable to achieve success for the aeronautic companies. Research limitations/implications: In the future, Industrial companies can transform their manufacturing processes by applying RFID technology that increases manufacturing cycle time, maximize efficiency and eliminate unnecessary steps. Practical implications: Using RFID technology in production will help industrial companies and also customers reduce their time and operating costs significantly and increase employee productivity. This application can also decrease lead time and make faster progress toward their sustainability goals. Originality/value: A detail comparison was made between two approaches; conventional production system and new approach by integrating RFID in composite part. At the end of analysis, time saving in the production was calculated as 135 minutes (more than 2 hours) by following real data.
Wydawca
Rocznik
Tom
Strony
5--13
Opis fizyczny
Bibliogr. 32 poz.
Twórcy
autor
- Supmeca-LISMMA-Paris, Mechanical and Manufacturing Engineering School, France
- Eurocopter, Composite production & Quality improvement, Paris, France
autor
- Supmeca-LISMMA-Paris, Mechanical and Manufacturing Engineering School, France
autor
- Airbus Headquarter - Value Chain Visibility, Toulouse, France
autor
- Airbus Headquarter - Value Chain Visibility, Toulouse, France
Bibliografia
- [1] M. Bhuptani, S. Mordapour, RFID Field Guide: deploying radio frequency identification systems, Sun Microsystem 1 (2005) 78-94.
- [2] H-A. Alhas, E. Bayraktar, C Nizam, J. Khalil, SEM-2013 USA, Process optimization by direct Integration of the RFID chips during the manufacturing of the composites used in aeronautical engineering, Chicago, 2012.
- [3] K. Finkenzeller, RFID Handbook - radio-frequency identification fundamentals and applications, John Wiley & Sohns 2 (2003) 1-7.
- [4] L.A. Dobrzanski, A. Wydrzynska, O. Iesenchuk, Intelligent epoxy matrix composite materials consisting of Tb0.3Dy0.7Fe1.9 magnetostrictive particulates, Archives of Materials Science and Engineering 35/1 (2009) 33-38.
- [5] M. Spilka, A. Kania, Influence of management system on the safety level in chosen enterprise, Journal of Achievements in Materials and Manufacturing Engineering 39/1 (2010) 95-102.
- [6] W. Wolany, M. Spilka, Influence of safety culture on the safety level in chosen enterprise, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 507-513.
- [7] M. Dudek-Burlikowska, Aspects of improving the organization directed to the quality, Journal of Achievements in Materials and Manufacturing Engineering 43/2 (2010) 101-108.
- [8] D. Szewieczek, M. Roszak, D. Helizanowicz, Methodology of the quality management in the productive process, Journal of Achievements in Materials and Manufacturing Engineering 30/1 (2008) 87-94.
- [9] E. Bayraktar, D. Katundi, A. Guinault, A. Kosecki, A. Larbi, Low velocity impact behaviour of the epoxy matrix composites reinforced with metallic and oxide particles, Dynamic Behaviour of Materials 1/1 (2013) 481-488.
- [10] M. Bobrek, V. Majstorovic, M. Sokovic, Design approach in management toward to business excellence, Journal of Achievements in Materials and Manufacturing Engineering 16 (2006) 184-189.
- [11] M. Dudek-Burlikowska, Using control charts X-R in monitoring a chosen production processes, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 487-498.
- [12] G. Roussos, V. Kostakos, RFID in pervasive computing: State-of-the-art and outlook, Pervasive and Mobile Computing 5/1 (2009) 110-131.
- [13] J.Y. Maina, M.H. Mickle, R.L. Michael, A. Sch. Laura, Application of CDMA for anti-collision and increased read efficiency of multiple RFID tags, Journal of Manufacturing Systems 26/1 (2007) 37-43.
- [14] Y.K. Leung, K.L. Choy, C.K. Kwong, A real-time hybrid information-sharing and decision support system for the mould industry, The Journal of High Technology Management Research 21/1 (2010) 64-77.
- [15] T. Karkoszka, D. Szewieczek, Control of measurement equipment in the aspect of integrated quality management, Journal of Achievements in Materials and Manufacturing Engineering 40/1 (2010) 95-102.
- [16] W.-C. Tsai, L. Tang, A model of the adoption of radio frequency identification technology: The case of logistics service firms, Journal of Engineering and Technology Management 29/1 (2012) 131-151.
- [17] R. Nowosielski, M. Spilka, Sustainable technological process as an element of the sustainable development strategy realisation, Journal of Achievements in Materials and Manufacturing Engineering 48/2 (2011) 200-208.
- [18] B. Bergquist, Traceability in iron ore processing and transports, Minerals Engineering 30 (2012) 44-51.
- [19] B. Ziębowicz, M. Dziekońska, L.A. Dobrzański, Properties and structure of the functional composite materials - Nd-Fe- Co-B powder bonded with polymer, Archives of Materials Science and Engineering 52/2 (2011) 74-81.
- [20] L.A. Dobrzański, A. Tomiczek, A. Nabiałek, R. Żuberek, Structure and magnetic properties of magnetostrictive Td0.3Dy0.7Fe1.9 /polyurethane composite materials, Journal of Achievements in Materials and Manufacturing Engineering 43/2 (2010) 527-532.
- [21] R. Nowosielski, Soft magnetic polymer - metal composites consisting of nanostructural Fe-basic powders, Journal of Achievements in Materials and Manufacturing Engineering 24/1 (2007) 68-77.
- [22] K. Penttilä, M. Keskilammi, L. Sydänheimo, M. Kivikoski, Radio frequency technology for automated manufacturing and logistics control, Part 2, RFID antenna utilization in industrial applications The International Journal of Advanced Manufacturing Technology 31/1-2 (2006) 116-124.
- [23] L. Zhekun, R. Gadh, B.S. Prabhu, Application of RFID Technology and smart parts in manufacturing, Proceedings of the Design Engineering Technical Conferences and Computers and Information in Engineering Conference DETC’04, Salt Lake City, 2004.
- [24] E.W.T. Ngai, D.C.K. Chau, J.K.L. Poon, A.Y.M. Chan, B.C.M. Chan, W.W.S. Wu, Implementing an RFID-based manufacturing process management system, Lessons learned and success factors, Journal of Engineering and Technology Management 29/1 (2012) 112-130.
- [25] R.G. Qiu, RFID-enabled automation in support of factory integration original research article, Robotics and Computer- Integrated Manufacturing 23/6 (2007) 677-683.
- [26] S.Y.L. Yin, H. P. Tserng, J.C. Wang, S.C. Tsai, Developing a precast production management system using RFID technology, Automation in Construction 18/5 (2009) 677-691.
- [27] T.S. López, RFID and sensor integration standards, State and future prospects review, Computer Standards and Interfaces 33/3 (2011) 207-213.
- [28] S. Sulaiman, U.A. Umar, S.H. Tang, N. Fatchurrohman, Application of radio frequency identification (RFID) in Manufacturing, Procedia Engineering 50 (2012) 697-706.
- [29] A. Brewer, N. Sloan, T.L. Landers, Intelligent tracking in manufacturing, Journal of Intelligent Manufacturing 10/3-4 (1999) 245-250.
- [30] E.W.T. Ngai, K.K.L. Moon, F.J. Riggins, C.Y. Yi, RFID research, An academic literature review (1995-2005) and future research directions, International Journal of Production Economics 112/2 (2008) 510-520.
- [31] M.A. Karim, A.J.R. Smith, S.K. Halgamuge, M.M. Islam, A comparative study of manufacturing practices and performance variables, International Journal of Production Economics 112/2 (2008) 841-859.
- [32] J.L. Lyu Jr., S-Y. Chang, T-L. Chen, Integrating RFID with quality assurance system - Framework and applications, 36/8 (2009) 10877-10882.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-60f729fd-16d7-4e11-89bc-cc44cda70db1