PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Cavitation erosion of electrostatic spray polyester coatings with different surface finish

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Polyester coatings are among the most commonly used types of powder paints and present a wide range of applications. Apart from its decorative values, polyester coating successfully prevents the substrate from environmental deterioration. This work investigates the cavitation erosion (CE) resistance of three commercial polyester coatings electrostatic spray onto AW-6060 aluminium alloy substrate. Effect of coatings repainting (single- and double-layer deposits) and effect of surface finish (matt, silk gloss and structural) on resistance to cavitation were comparatively studied. The following research methods were used: CE testing using ASTM G32 procedure, 3D profilometry evaluation, light optical microscopy, scanning electron microscopy (SEM), optical profilometry and FTIR spectroscopy. Electrostatic spray coatings present higher CE resistance than aluminium alloy. The matt finish double-layer (M2) and single-layer silk gloss finish (S1) are the most resistant to CE. The structural paint showed the lowest resistance to cavitation wear which derives from the rougher surface finish. The CE mechanism of polyester coatings relies on the material brittle-ductile behaviour, cracks formation, lateral net-cracking growth and removal of chunk coating material and craters’ growth. Repainting does not harm the properties of the coatings. Therefore, it can be utilised to regenerate or smother the polyester coating finish along with improvement of their CE resistance.
Rocznik
Strony
art. no. e137519
Opis fizyczny
Bibliogr. 41 poz., rys., tab.
Twórcy
  • Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland
  • Students Research Group of Materials Technology, Department of Materials Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland
  • Analytical Laboratory, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Sklodowska University, pl. Maria Curie-Sklodowska 3, 20-031 Lublin, Poland
Bibliografia
  • [1] A. Kausar, “Review of fundamentals and applications of polyester nanocomposites filled with carbonaceous nanofillers,” J. Plast. Film Sheeting, vol. 35, no. 1, pp. 22–44, Jan. 2019, doi: 10.1177/8756087918783827.
  • [2] A. Krzyzak, E. Kosicka, and R. Szczepaniak, “Research into the Effect of Grain and the Content of Alundum on Tribological Properties and Selected Mechanical Properties of Polymer Composites,” Materials, vol. 13, no. 24, Art. no. 5735, Jan. 2020, doi: 10.3390/ma13245735.
  • [3] A. Kausar, “High performance epoxy/polyester-based nanocomposite coatings for multipurpose applications: A review,” J. Plast. Film Sheeting, vol. 36, no. 4, pp. 391–408, Oct. 2020, doi: 10.1177/8756087920910481.
  • [4] M. Winnicki, T. Piwowarczyk, and A. Małachowska, “General description of cold sprayed coatings formation and of their properties,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 66, no. 3, pp. 301–310, Jun. 2018.
  • [5] L. Łatka, L. Pawłowski, M. Winnicki, P. Sokołowski, A. Małachowska, and S. Kozerski, “Review of Functionally Graded Thermal Sprayed Coatings,” Appl. Sci., vol. 10, no. 15, Art. no. 5153, Jan. 2020, doi: 10.3390/app10155153.
  • [6] R. Kosydar et al., “Boron nitride/titanium nitride laminar lubricating coating deposited by pulsed laser ablation on polymer surface,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 56, no. 3, pp. 217–221, 2008.
  • [7] T. Burakowski and T. Wierzchon, Surface Engineering of Metals: Principles, Equipment, Technologies. Boca Raton, Fla: CRC Press, 1998.
  • [8] T. Hejwowski, Nowoczesne powłoki nakładane cieplnie odporne na zużycie ścierne i erozyjne (Modern wear and erosion resitant thermally deposited coatings). Lublin, Poland: Politechnika Lubelska (Lublin University of Technology), 2013. [Online]. Available: http://bc.pollub.pl/dlibra/docmetadata?id=4059.
  • [9] Z.W. Wicks. Jr, F.N. Jones, S.P. Pappas, and D.A. Wicks, Organic Coatings: Science and Technology. John Wiley & Sons, 2007.
  • [10] S. Biggs, C.A. Lukey, G.M. Spinks, and S.-T. Yau, “An atomic force microscopy study of weathering of polyester/melaminę paint surfaces,” Prog. Org. Coat., vol. 42, no. 1, pp. 49–58, Jun. 2001, doi: 10.1016/S0300-9440(01)00147-3.
  • [11] M. Oleksy et al., “Kompozycje modyfikowanych farb proszkowych. Cz. 1. Hybrydowe kompozycje poliestrowych farb proszkowych,” Polimery, vol. 63, no. 11– 12, pp. 762‒771, 2018, doi: 10.14314/polimery.2018.11.4.
  • [12] M. Fernández-Álvarez, F. Velasco, and A. Bautista, “Effect on wear resistance of nanoparticles addition to a powder polyester coating through ball milling,” J. Coat. Technol. Res., vol. 15, no. 4, pp. 771–779, Jul. 2018, doi: 10.1007/s11998-018-0106-z.
  • [13] M. Zouari, M. Kharrat, and M. Dammak, “Wear and friction analysis of polyester coatings with solid lubricant,” Surf. Coat. Technol., vol. 204, no. 16, pp. 2593–2599, May 2010, doi: 10.1016/j.surfcoat.2010.02.001.
  • [14] I. Stojanović, V. Šimunović, V. Alar, and F. Kapor, “Experimental Evaluation of Polyester and Epoxy–Polyester Powder Coatings in Aggressive Media,” Coatings, vol. 8, no. 3, Art. no. 98, Mar. 2018, doi: 10.3390/coatings8030098.
  • [15] K.V.S.N. Raju and D.K. Chattopadhyay, “Polyester coatings for corrosion protection,” in High-Performance Organic Coatings, A.S. Khanna, Ed. Woodhead Publishing, 2008, pp. 165–200. doi: 10.1533/9781845694739.2.165.
  • [16] M. Szala and E. Kot, “Influence of repainting on the mechanical properties, surface topography and microstructure of polyester powder coatings,” Adv. Sci. Technol. Res. J., vol. 11, no. 2, pp. 159–165, Jun. 2017, doi: 10.12913/22998624/69680.
  • [17] M. Walczak, D. Pieniak, and M. Zwierzchowski, “The tribological characteristics of SiC particle reinforced aluminium composites,” Arch. Civ. Mech. Eng., vol. 15, no. 1, pp. 116–123, Jan. 2015, doi: 10.1016/j.acme.2014.05.003.
  • [18] M. Szala, L. Łatka, M.Walczak, and M.Winnicki, “Comparative Study on the Cavitation Erosion and Sliding Wear of Cold-Sprayed Al/Al2O3 and Cu/Al2O3 Coatings, and Stainless Steel, Aluminium Alloy, Copper and Brass,” Metals, vol. 10, no. 7, Art. no. 7, Jul. 2020, doi: 10.3390/met10070856.
  • [19] V. Caccese, K.H. Light, and K.A. Berube, “Cavitation erosion resistance of various material systems,” Ships Offshore Struct., vol. 1, no. 4, pp. 309–322, Apr. 2006, doi: 10.1533/saos.2006.0136.
  • [20] T. Deplancke, O. Lame, J.-Y. Cavaille, M. Fivel, M. Riondet, and J.-P. Franc, “Outstanding cavitation erosion resistance of Ultra High Molecular Weight Polyethylene (UHMWPE) coatings,” Wear, vol. 328–329, pp. 301–308, Apr. 2015, doi: 10.1016/j.wear.2015.01.077.
  • [21] N. Qiu, L. Wang, S. Wu, and D.S. Likhachev, “Research on cavitation erosion and wear resistance performance of coatings,” Eng. Fail. Anal., vol. 55, pp. 208–223, Sep. 2015, doi: 10.1016/j.engfailanal.2015.06.003.
  • [22] S. Chi, J. Park, and M. Shon, “Study on cavitation erosion resistance and surface topologies of various coating materials used in shipbuilding industry,” J. Ind. Eng. Chem., vol. 26, pp. 384–389, Jun. 2015, doi: 10.1016/j.jiec.2014.12.013.
  • [23] G.L. García et al., “Cavitation resistance of epoxybased multilayer coatings: Surface damage and crack growth kinetics during the incubation stage,” Wear, vol. 316, no. 1–2, pp. 124–132, Aug. 2014, doi: 10.1016/j.wear.2014.04.007.
  • [24] M. Hibi, K. Inaba, K. Takahashi, K. Kishimoto, and K. Hayabusa, “Effect of Tensile Stress on Cavitation Erosion and Damage of Polymer,” J. Phys. Conf. Ser., vol. 656, no. 1, p. 012049, Nov. 2015, doi: 10.1088/1742-6596/656/1/012049.
  • [25] G. Taillon, S. Saito, K. Miyagawa, and C. Kawakita, “Cavitation erosion resistance of high-strength fiber reinforced composite material,” IOP Conf. Ser. Earth Environ. Sci., vol. 240, no. 6, p. 062056, Mar. 2019, doi: 10.1088/1755-1315/240/6/062056.
  • [26] N. Sheppard, “The Historical Development of Experimental Techniques in Vibrational Spectroscopy,” in Handbook of Vibrational Spectroscopy, American Cancer Society, 2006. doi: 10.1002/0470027320.s0101.
  • [27] R.M. Silverstein et al., Spectrometric Identification of Organic Compounds, 8th Edition, 8th edition. Wiley, 2014.
  • [28] W. Macek et al., “Profile and Areal Surface Parameters for Fatigue Fracture Characterisation,” Materials, vol. 13, no. 17, Art. no. 3691, 2020, doi: 10.3390/ma13173691.
  • [29] “ISO 4287:1997. Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters,” International Organization for Standardization, Geneva, Switzerland, Norma, 1997.
  • [30] A. Skoczylas, “Influence of Centrifugal Shot Peening Parameters on the Impact Force and Surface Roughness of EN-AW2024 Aluminum Alloy Elements,” Adv. Sci. Technol. Res. J., vol. 15, no. 1, pp. 71–78, Mar. 2021, doi: 10.12913/22998624/130511.
  • [31] “ASTM G32-10: Standard Test Method for Cavitation Erosion Using Vibratory Apparatus,” ASTM International: West Conshohocken, Philadelphia, PA, USA, 2010.
  • [32] M. Szala, M. Walczak, L. Łatka, K. Gancarczyk, and D. Özkan, “Cavitation Erosion and Sliding Wear of MCrAlY and NiCrMo Coatings Deposited by HVOF Thermal Spraying,” Adv. Mater. Sci., vol. 20, no. 2, pp. 26–38, Jun. 2020, doi: 10.2478/adms-2020-0008.
  • [33] J. Steller, A. Krella, J. Koronowicz, and W. Janicki, “Towards quantitative assessment of material resistance to cavitation erosion,” Wear, vol. 258, no. 1, pp. 604–613, Jan. 2005, doi: 10.1016/j.wear.2004.02.015.
  • [34] J. Steller, “International Cavitation Erosion Test and quantitative assessment of material resistance to cavitation,” Wear, vol. 233–235, pp. 51–64, Dec. 1999, doi: 10.1016/S0043-1648(99)00195-7.
  • [35] B. Dybowski, M. Szala, T. J. Hejwowski, and A. Kiełbus, “Microstructural phenomena occurring during early stages of cavitation erosion of Al-Si aluminium casting alloys,” Solid State Phenom., vol. 227, pp. 255–258, 2015, doi: 10.4028/www.scientific.net/SSP.227.255.
  • [36] J. Zhao, Z. Jiang, J. Zhu, J. Zhang, and Y. Li, “Investigation on Ultrasonic Cavitation Erosion Behaviors of Al and Al-5Ti Alloys in the DistilledWater,” Metals, vol. 10, no. 12, Art. no. 1631, Dec. 2020, doi: 10.3390/met10121631.
  • [37] J. Lin, Z. Wang, J. Cheng, M. Kang, X. Fu, and S. Hong, “Effect of Initial Surface Roughness on Cavitation Erosion Resistance of Arc-Sprayed Fe-Based Amorphous/Nanocrystalline Coatings,” Coatings, vol. 7, no. 11, Art. no. 2000, Nov. 2017, doi: 10.3390/coatings7110200.
  • [38] M. Szala, L. Łatka, M. Awtoniuk, M. Winnicki, and M. Michalak, “Neural Modelling of APS Thermal Spray Process Parameters for Optimizing the Hardness, Porosity and Cavitation Erosion Resistance of Al2O3‒13 wt% TiO2 Coatings,” Processes, vol. 8, no. 12, Art. no. 1544, Dec. 2020, doi: 10.3390/pr8121544.
  • [39] J.C. Lindon, Encyclopedia of Spectroscopy and Spectrometry – 3rd Edition. 2010. [Online]. Available: https://www.elsevier.com/books/encyclopedia-of-spectro scopy-and-spectrometry/lindon/978-0-12-803224-4 (Accessed: Feb. 24, 2021).
  • [40] J.I. Haleem, “A Review of: Handbook of Near-Infrared Analysis,” Instrum. Sci. Technol., vol. 22, no. 3, pp. 283–285, Aug. 1994, doi: 10.1080/10739149408000456.
  • [41] Infrared Spectroscopy: Fundamentals and Applications. John Wiley & Sons, Ltd, 2004, doi: 10.1002/0470011149.ch3.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-60de393d-9cc9-4449-9699-f8aae5715bb8
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.