Analysis of the wire rod superficial processing based on the quality criterion

• Autorzy: Karkoszka T. , Szewieczek D.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Purpose of the presented paper aimed at showing the connection between the usage of practically well-chosen methods of investigation and opinion of quality and applying the modern technical, technological or organisational solutions, in this case in the technological processes of preparation the wire rod surface to the plastic processing. Design/methodology/approach: Methodology used for the research has covered the proper integrated expert methods of technological processes’ analysis and opinion, also the integrated opinion of technological processes using the Integrated Risk Ratio. Findings: Findings of the carried out researches are as follows: the realisation of quality and environmental policy based on the proposed model leads to the improvement of analysed productive processes of steel wire rod, and in consequence - to their optimisation both from the point of view of products` quality and in the aspect of quality of environmental influence. Practical implications: Practical implication can refer to the replacement of chemical etching of wire rode by applying of the technology, taking into account the method of mechanical removing of cinder. Originality/value: Originality of the presented paper belongs to the new methodology comprising the usage of integrated opinion of technological processes, including the Integrated Risk Ratio.

Słowa kluczowe

EN

quality management; environmental management; technological process analysis; integrated risk ratio

PL

zarządzanie jakością; zarządzanie środowiskiem; analiza procesów technologicznych; zintegrowany współczynnik ryzyka

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2006
• Tom: Vol. 18, nr 1-2
• Strony: 443--446
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Karkoszka T.

• Division of, Quality Management, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Szewieczek D.

• Division of, Quality Management, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] T. Karkoszka, Modeling of the chosen processes the steel wire technology with regard to quality policy and environmental protection, Doctoral dissertation, Gliwice, 2004.
• [2] T. Karkoszka, M. Roszak, Quality and environmental aspects in the technological process management, Polish Conference on: Projecting & Managing of the realisation of 446 Short paper Volume 18 Issue 1-2 September–October 2006 the production. Chosen subjects, 5th-7th of May, 2005, Zielona Góra, 63-68 (in Polish).
• [3] L.A. Dobrzański, Materials science and metallography. Engineering materials and the basis of material projecting, WNT, Warszawa, 2002 (in Polish).
• [4] D. Szewieczek, T. Karkoszka, The analysis of a technological process based on quality and environmental criterion, The Scientific Conference on Materials, Mechanical and Manufacturing Engineering and Technology MMME’2005, Worldwide Congress on Materials and Manufacturing Engineering and Technology COMMENT’2005, 16th - 19th of May, 2005, Gliwice - Wisła, 285-288.
• [5] D. Szewieczek, St. Tkaczyk, T. Karkoszka, QFD analysis as a manner of quality assurance in the technological process, The 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering AMME’2003, Gliwice - Wisła, 919-922.
• [6] St. Tkaczyk, T. Karkoszka, Superficial processing in the aspect of integrated management systems, International Conference on: Integrated Management Systems - quality, environment, safety, technology, Szczyrk 2002, 461-469 (in Polish).
• [7] St. Tkaczyk, T. Karkoszka, Integration of the management systems based on the quality criterion in technological processes, International Conference on: Integrated Management Systems - quality, environment, safety, technology, Szczyrk 2001, 373-379 (in Polish).
• [8] J. Michalska, The usage of the Balanced Scorecard of the estimation of the enterprise’s effectiveness, Journal of Materials Processing Technology 162-163 (Elsevier), 751-758.
• [9] M. Roszak, St. Tkaczyk, Chosen aspects of evaluation of productive processes on the example of productive chains of sections type V29, Journal of Materials Processing Technology 162-163 (Elsevier), 770-777.
• [10] B. Krupińska, D. Szewieczek, The attempt of evaluation of the chosen technological gear wheel process on the basis of its efficiency operation, The Scientific Conference on Materials, Mechanical and Manufacturing Engineering and Technology MMME’2005, Worldwide Congress on Materials and Manufacturing Engineering and Technology COMMENT’2005, 16th - 19th of May, 2005, Gliwice - Wisła, 363-370.
• [11] D. Szewieczek, St. Tkaczyk, B. Wojtaszek, Measurement and control of the technological process by means of the analysis of its effeciency, The 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering AMME’2003, Gliwice - Zakopane, 2003.
• [12] P. Lowe, Chapman H., The Management of Technology. Perception and opportunities, Chapman & Hall, London, 1995.
• [13] PN-EN ISO 9000. Quality management systems. Fundamentals and vocabulary, PKN, Warszawa, 2001.
• [14] PN-EN ISO 9001. Quality management systems. Requirements, PKN, Warszawa, 2001.
• [15] PN-EN ISO 14001. Environmental management systems. Specification with guidance for use, PKN, Warszawa, 2005.