Analysis of the technological process of rings of train wheels

• Autorzy: Topolska S.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of this paper is to show the analysis of a specific process of manufacturing the rings of train wheels. Secondly this work presents the exemplars of possible faults in this technology. Design/methodology/approach: The presented work bases on the investigations made in chosen manufacturing plant. Also laboratory tests have been made to point the discovered problems. Findings: Results show that it is important to apply in modern manufacturing processes the system of monitoring. Also it helps to establish the continuous quality assurance system. Moreover it is proved that quality system must cooperate with the training system. Research limitations/implications: The presented elaboration includes results from one manufacturing plant. It is consider with the fact that this production process is rare so it is difficult to receive comparative data. Secondly, the limitation of this work is the commercial secret. Some specific parameters of presented process are secret. Also the name of manufacturing plant is omitted. Practical implications: The implication of the work could be found in two remarks. Firstly it is important to introduce to the industry practice the integrated approach. Secondly the human and technical factors are equally important. Originality/value: The value of this work is its subject. In this work a very rare technological process is presented. Secondly, in this work it is presented the analysis of quality parameters of this process. Also are proposed the general solutions of same faults.

Słowa kluczowe

EN

quality assessment; train wheels

PL

ocena jakości; koła pociągu

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2006
• Tom: Vol. 17, nr 1-2
• Strony: 405--408
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Topolska S.

• Division of Quality Management, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] T. Karpiński: Production Engineering (in Polish), Wydawnictwo Naukowo-Techniczne, Warszawa 2004.
• [2] Documentation of the Steel Mill (the enjoyment according to the reservation of the X Steel Mill).
• [3] E. Kindlarski: Products Quality (in Polish), Wydawnictwo Naukowe PWN, Warszawa 1988.
• [4] J. Oakland: Total Quality Management, Oxford Press, Oxford 1994.
• [5] M. Blicharski: Material Engineering. Steel (in Polish), Wydawnictwo Naukowo-Techniczne, Warszawa 2004.
• [6] K. Abou El Hossein, Z. Yahya: High Speed End Milling of AISI 304 Stainless Steel Using New Geometrically Developed Carbide Inserts, Proceedings of AMME 2005, pp. 1-8.
• [7] Cooperative work: Modern Metrology (in Polish), Wydawnictwo Naukowo-Techniczne, Warszawa 2004.
• [8] S. Topolska: Characteristic Defects of Metallic Coatings Obtained in the Metallization Process, Proceedings of Comment 2005.
• [9] L. Dobrzański: Metal Engineering Materials (in Polish), Wydawnictwo Naukowo-Techniczne, Warszawa 2004.
• [10] S. Tkaczyk, S. Topolska: Physico-Chemical Properties of TiN Films, Proceedings of AMT 2001, pp. 925-927.
• [11] S. Fok, Mitchell B., Smart J.: Testing to Distinguish Between Failure Laws for Ceramics, Proceedings of AMME 2000, pp. 187-190.
• [12] J. Wyrzykowski, E. Pleszakow, J. Sieniawski: Strains and Fractures of Metals (in Polish), Wydawnictwo Naukowo-Techniczne, Warszawa 1999.
• [13] S. Rusz: The Influence of Technological Parameters on the Rotary Pressing Process, Proceedings of AMME 2000, pp. 475-478.
• [14] A. Gwiazda: The Method of Information Ordering Using the Pareto Rule (in Polish), Ekonomika i Organizacja Produkcji 2002, No. 11 pp 21-28.
• [15] S. Topolska: Process of Vacuum Metallization - A Simulation in the Taylor Program, Proceedings of CAM3S 2005, pp. 63-68.