Examination of Mechanical and Electrical Properties and Structure of Selected Aluminum Alloy Sheets Produced from TRC Semi-Products

• Autorzy: Ścięźor W. , Kiesiewicz G. , Kowal R. , Franczak K. , Grzebinoga J. , Mamala A. , Kwaśniewski P.

Identyfikatory

DOI

10.1515/amm-2017-0330

• Języki publikacji: EN

Abstrakty

EN

Modern manufacturing methods of non-ferrous metals, especially aluminum and its alloys, are more and more often based on integrated technologies combining multiple operations in a single process. One of the most popular methods for producing flat components by cold working is twin roll casting technology (TRC). It allows to eliminate from manufacturing the extremely expensive hot rolling operation, as the TRC semi-product (strip) can be directly cold rolled. The results of mechanical and electrical properties and structure examination of strips after casting were presented in the paper. The effect of cold rolling parameters on post-process mechanical properties and structure of sheets was investigated too.

Słowa kluczowe

EN

aluminum; twin roll casting; cold rolling; structure; hardness; electrical conductivity

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2237--2245
• Opis fizyczny: Bibliogr. 14 poz., rys., wykr., tab.

Twórcy

autor

Ścięźor W.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Kiesiewicz G.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Kowal R.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Franczak K.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Grzebinoga J.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Mamala A.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, A. Mickiewicza 30, 30-059 Kraków, Poland

autor

Kwaśniewski P.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, A. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] D. V. Edmonds, Innovation in the processing of tonnage materials: examples from the steel and aluminium industries, Journal of Materials Processing Technology 83, 1-13 (1998).
• [2] S. Ge, M. Isac, R. I. L. Guthrie, Progress of Strip Casting Technology for Steel; Historical Developments, ISIJ International 52 (12), 2109-2122 (2012).
• [3] W. Ściężor, T. Knych, A. Mamala, Innowacyjna technologia odle-wania stopów aluminium metodą twin roll casting, Innowacyjność akademicka akceleratorem rozwoju nauki i przedsiębiorczości, Monografia pod redakcją Janusza Juraszka i Joanny Kurowskiej-Pysz, Bielsko Biała, 147-162, (2012).
• [4] R. Cook, P. G. Grocock, P. M. Thomas, D. V. Edmonds, J. D. Hunt, Development of the twin-roll casting process, Journal of Material Processing Technology 55, 76-84 (1995)
• [5] R. E. Sanders Jr, P. A. Hollinshead, E. A. Simielli, Industrial Development of Non-Heat Treatable Aluminum Alloys, Materials Forum 28, 53-64 (2004).
• [6] T. Haga: Development of a twin roll caster for light metals, Journal of Achievements in Materials and Manufacturing Engineering 43, 393-402 (2010).
• [7] M. Yun, S. Lokyer, J. D. Hunt, Twin roll casting of aluminum alloys, Materials Science and Engineering A280, 116-123 (2000).
• [8] K. Delijić, V. Asanović, D. Radonjić, The Effect of the Thermo-Mechanical Processing on the Properties of some Al-Fe-Si Alloys with High Fe/Si Ratio, Materials Science Forum 555, 559-563 (2007).
• [9] Y. Birol, Thermomechanical processing of a twin-roll cast Al–1Fe–0.2Si alloy, Journal of Materials Processing Technology 202, 564-568 (2008).
• [10] C. Kammer, et. al., Thermomechanische Behandlung von Al99,5-Gießwalzband, Neue Hütte 35, 418-421 (1990).
• [11] A. Mamala, W. Ściężor, Wpływ odkształcenia na zimno oraz obróbki cieplnej na właściwości mechaniczne oraz elektryczne taśm z aluminium serii 1xxx oraz 8xxx odlewanych w sposób ciągły, Rudy i Metale Nieżelazne 57 (9), 604-608 (2012).
• [12] A. Mamala, P. Kwaśniewski, T. Knych, W. Ściężor, G. Kiesiewicz, A. Kawecki, Badania własności mechaniczno-elektrycznych blach z aluminium serii 1xxx oraz 8xxx uzyskiwanych z wsadu odlewanego w układzie ciągłym, Rudy i Metale Nieżelazne 58 (7), 785-789 (2013).
• [13] E. Fraś, Krystalizacja metali, WNT, 2004 Warszawa.
• [14] L. F. Mondolfo, Metallography of Aluminum Alloys, John Wiley & Sons, USA (1943).

Uwagi

EN

Research funded by the statutory work: “Advanced processes of synthesis and processing of highly-conductive materials based on non-ferrous metals for use in the energy sector”, contract No. 11.11.180. 804/2016, Faculty of Non-Ferrous Metals of the AGH University of Science and Technology

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).