Potential utilization of nettle (Urtica dioica L.) shives as a raw material for particleboards

• Autorzy: Pelc Olaf , Wronka Anita

Identyfikatory

DOI

10.5604/01.3001.0055.1936

Warianty tytułu

PL

Potencjalne wykorzystanie paździerzy pokrzywy (Urtica dioica L.) jako surowca do płyt wiórowych

• Języki publikacji: EN

Abstrakty

EN

Potential utilization of nettle (Urtica dioica L.) shives as a raw material for particleboards. The aim of the research was to confirm the possibility of using woody particles with sorted-out fibres of nettle Urtica dioica stems as alternative raw materials in the production of particleboards. As part of the work, particleboards made out of nettle Urtica dioica particles were produced in laboratory conditions and selected psychical and mechanical properties of the obtained boards were tested. The results show, that it is not possible to manufacture particleboards for the furniture industry using particles of nettle without fibres (Urtica dioica L.) meeting the requirements for P2 boards according to EN 312 (2010). Sorting out the fibres from the raw material provided more consistent panel’ properties.

PL

Potencjalne wykorzystanie paździerzy pokrzywy (Urtica dioica L.) jako surowca do płyt wiórowych. Celem badań było potwierdzenie możliwości wykorzystania cząstek zdrewniałych po odsianiu włókien łodyg pokrzywy Urtica dioica jako surowców alternatywnych do produkcji płyt wiórowych. W ramach pracy wytworzono w warunkach laboratoryjnych płyty wiórowe z cząstek pokrzywy Urtica dioica i zbadano wybrane właściwości fizyczne i mechaniczne otrzymanych płyt. Wyniki wskazują, że nie jest możliwa produkcja płyt wiórowych dla przemysłu meblarskiego z wykorzystaniem cząstek pokrzywy bez włókien (Urtica dioica L.) spełniających wymagania dla płyt P2 wg EN 312 2010. Oddzielenie włókien od surowca zapewniło bardziej spójne parametry płyt.

Słowa kluczowe

EN

nettle; Urtica dioica L.; particleboard; furniture

PL

pokrzywa; Urtica dioica L.; płyta wiórowa; meble

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2025
• Tom: No. 129
• Strony: 31--42
• Opis fizyczny: Bibliogr. 33 poz., rys., tab.

Twórcy

autor

Pelc Olaf

• Faculty of Wood Technology, Warsaw University of Life Sciences-SGGW, Warsaw, Poland

autor

Wronka Anita

• Department of Technology and Entrepreneurship in Wood Industry, Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences – SGGW, Warsaw, Poland

• https://orcid.org/0000-0003-1269-5367

Bibliografia

• [1] ABBÈS, F., XU, S., AND ABBÈS, B. (2022). ‘Characterization of Mechanical and Damping Properties of Nettle and Glass Fiber Reinforced Hybrid Composites’, Journal of Composites Science, 6(8). DOI: 10.3390/jcs6080238
• [2] AKGÜL, M. (2013). ‘Suitability of stinging nettle (Urtica dioica L.) stalks for medium density fiberboards production’, Composites Part B: Engineering, 45(1), 925–929. DOI: 10.1016/j.compositesb.2012.09.048
• [3] AURIGA, R., AURIGA, A., BORYSIUK, P., WILKOWSKI, J., FORNALCZYK, O., AND OCHMIAN, I. (2022). ‘Lignocellulosic Biomass from Grapevines as Raw Material for Particleboard Production’, Polymers, 14(12), 1–10. DOI: 10.3390/polym14122483
• [4] BEKALO, S. A., AND REINHARDT, H. W. (2010). ‘Fibers of coffee husk and hulls for the production of particleboard’, Materials and Structures/Materiaux et Constructions, 43(8), 1049–1060. DOI: 10.1617/s11527-009-9565-0
• [5] BORYSIUK, P., JENCZYK-TOŁŁOCZKO, I., AURIGA, R., AND KORDZIKOWSKI, M. (2019). ‘Sugar beet pulp as raw material for particleboard production’, Industrial Crops and Products, Elsevier, 141(September), 111829. DOI: 10.1016/j.indcrop.2019.111829
• [6] BRITO, F. M. S., SILVA, B. A., DE CARVALHO, I. M., BAÚTI, S. B., MENDES, L. M., AND GUIMARÃES, J. B. (2022). ‘Technological Properties of Medium Density Particleboards Produced with Peanut (Arachis Hypogaea) and Pinus Oocarpa Hulls’, Floresta e Ambiente, 29(2). DOI: 10.1590/2179-8087-FLORAM-2021-0101
• [7] DEEPA, R., KUMARESAN, K., AND SARAVANAN, K. (2023). ‘Effect of Surface Modification of Himalayan Nettle Fiber and Characterization of the Morphology, Physical and Mechanical Properties’, AUTEX Research Journal, 23(1), 1–6. DOI: 10.2478/aut-2022-0010
• [8] DURAN, A. J. F. P., LYRA, G. P., CAMPOS FILHO, L. E., BUENO, C., ROSSIGNOLO, J. A., ALVES-LIMA, C., AND FIORELLI, J. (2024). ‘The Use of Sargasso Seaweed as Lignocellulosic Material for Particleboards: Technical Viability and Life Cycle Assessment’, Buildings, 14(5). DOI: 10.3390/buildings14051403
• [9] EN 310. (1993). Wood-Based Panels. Determination of Modulus of Elasticity in Bending and of Bending Strength, European Committee for Standardization, Brussels, Belgium.
• [10] EN 312. (2010). Particleboards - Specifications, European Committee for Standardization, Brussels, Belgium.
• [11] EN 317. (1993). Particleboards and fiberboards – Determination of swelling in thickness after immersion in water, European Committee for Standardization, Brussels, Belgium.
• [12] EN 319. (1993). Particleboards and Fibreboards. Determination of Tensile Strength Perpendicular to the Plane of the Board, European Committee for Standardization, Brussels, Belgium.
• [13] EN 320. (2011). Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws, European Committee for Standardization, Brussels, Belgium.
• [14] EN 323. (1993). Wood-based panels - Determination of density, European Committee for Standardization, Brussels, Belgium.
• [15] EN 827. (2005). Adhesives - Determination of conventional solids content and constant mass solids content, European Committee for Standardization, Brussels, Belgium.
• [16] FARIA, D. L., GUIMARÃES, J. C. O., PROTÁSIO, T. DE P., MENDES, L. M., AND GUIMARÃES JUNIOR, J. B. (2022). ‘Conventional low-density particleboards produced from Mauritia flexuosa and Eucalyptus spp. wood’, Clean Technologies and Environmental Policy, Springer Berlin Heidelberg, 24(9), 2761–2771. DOI: 10.1007/s10098-022-02350-w
• [17] GRIGOROV, R., AND SAVOV, V. (2023). ‘Mechanical Properties of Three-Layered Particleboards with Face Layers of Beech and Oak Particles and a Core Layer of Conifer and Sunflower Stalks Particles’, in: Innovation in Woodworking Industry and Engineering Design, N. Trichkov, D. Angelova, N. Minkovski, V. Savov, and P. Vitchev, eds., University of Forestry – Faculty of Forest Industry, Kliment Ohridski Bul., 10, Sofia, 1797, Bulgaria, Sofia, Bulgaria, 60–69.
• [18] GULER, C., COPUR, Y., AND TASCIOGLU, C. (2008). ‘The manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and European Black pine (Pinus nigraArnold) wood chips’, Bioresource Technology, 99(8), 2893–2897. DOI: 10.1016/j.biortech.2007.06.013
• [19] KOWALUK, G., AND WRONKA, A. (2020). ‘Selected physical and mechanical properties of particleboards produced from lignocellulosic particles of black chokeberry (Aronia melanocarpa (Michx.) Elliott)’, Annals of WULS, Forestry and Wood Technology, 112(112), 60–70. DOI: 10.5604/01.3001.0014.7692
• [20] KUCUKTUVEK, M., KASAL, A., KUSKUN, T., AND ERDIL, Y. Z. (2017). ‘Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction’, BioResources, 12(1), 839–852. DOI: 10.15376/biores.12.1.839-852
• [21] KUP, F., AND VURAL, C. (2021). ‘Physical and mechanical properties of particleboards produced from cotton stalk and corn stalk’, Fresenius Environmental Bulletin, 30(2), 853–859.
• [22] NEITZEL, N., HOSSEINPOURPIA, R., AND ADAMOPOULOS, S. (2023). ‘Effect of press temperature on oat husk particleboards bound with a dialdehyde starch adhesive’, Research Square, 3–8. DOI: 10.21203/rs.3.rs-2816320/v1
• [23] NTALOS, G. A., AND GRIGORIOU, A. H. (2002). ‘Characterization and utilisation of vine prunings as a wood substitute for particleboard production’, Industrial Crops and Products, 16(1), 59–68. DOI: 10.1016/S0926-6690(02)00008-0
• [24] PAPADOPOULOS, A. (2018). ‘Banana Chips (Musa Acuminata) as an alternative lignocellulosic raw material for particleboard manufacture’, Maderas: Ciencia y Tecnologia, 20(3), 395–402. DOI: 10.4067/s0718-221x2018005031001
• [25] PĘDZIK, M., JANISZEWSKA, D., AND ROGOZIŃSKI, T. (2021). ‘Alternative lignocellulosic raw materials in particleboard production: A review’, Industrial Crops and Products, Elsevier B.V. DOI: 10.1016/j.indcrop.2021.114162
• [26] PELC, O., AND KOWALUK, G. (2023). ‘Selected physical and mechanical properties of particleboards with variable shares of nettle Urtica dioica L. lignocellulosic particles’, Annals of WULS, Forestry and Wood Technology, 123, 30–40. DOI: 10.5604/01.3001.0053.9307
• [27] PIRAYESH, H., KHAZAEIAN, A., KHANJANZADEH, H., AND BAHRINEJAD, A. (2011). ‘Optimum condition of manufacturing wood-based composite from mixture of wood particles/ walnut and almond shells’, Key Engineering Materials, 471–472(May 2018), 91–96. DOI: 10.4028/www.scientific.net/KEM.471-472.91
• [28] RAJ, M., FATIMA, S., AND TANDON, N. (2020). ‘An experimental and theoretical study on environment-friendly sound absorber sourced from nettle fibers’, Journal of Building Engineering, 31(May). DOI: 10.1016/j.jobe.2020.101395
• [29] TAHA, I., ELKAFAFY, M. S., AND EL MOUSLY, H. (2018). ‘Potential of utilizing tomato stalk as raw material for particleboards’, Ain Shams Engineering Journal, Ain Shams University, 9(4), 1457–1464. DOI: 10.1016/j.asej.2016.10.003
• [30] VALARELLI, I. D., BATTISTELLE, R. A. G., BRANCO, L. A. M. N., CHAHUD, E., CHRISTOFORO, A. L., ROCCO LAHR, F. A., AND BEZERRA, B. S. (2014). ‘Evaluation of bamboo particleboards produced with urea-formaldheyde resin’, Advanced Materials Research, 1025–1026(September), 432–435. DOI: 10.4028/www.scientific.net/AMR.1025-1026.432
• [31] WRONKA, A., AND KOWALUK, G. (2019). ‘Selected properties of particleboard made of raspberry Rubus idaeus L. lignocellulosic particles’, Annals of WULS, Forestry and Wood Technology, 105(105), 113–124. DOI: 10.5604/01.3001.0013.7727
• [32] WRONKA, A., AND KOWALUK, G. (2022). ‘The Influence of Multiple Mechanical Recycling of Particleboards on Their Selected Mechanical and Physical Properties’, Materials, 15(23). DOI: https://doi.org/10.3390/ma15238487
• [33] YANG, H., KIM, D., AND KIM, H. (2003). ‘Rice straw–wood particle composite for sound absorbing’, Bioresource Technology, 86, 117–121. DOI: 10.1016/S0960-8524(02)00163-3