Investigate the Possibility of Tekcast Methods Used for Casting Polymeric Resin Materials

• Autorzy: Mäsiar H. , Repka L. , Lipták P. , Híreš O.

Identyfikatory

DOI

10.2478/afe-2014-0049

• Języki publikacji: EN

Abstrakty

EN

Contribution gives an overview of knowledge about the method of centrifugal casting with orientate on Tekcast system. Company Tekcast Industries has developed a device for centrifugal casting, extending the area of production of castings or prototyping of metal or plastic. Materials suitable for the centrifugal casting with flexible operating parameters may include non-ferrous metal alloy based on zinc or aluminum or non-metallic materials such as polyester resins, polyurethane resins, epoxy resins, waxes and the like. The casting process is particularly suitable for a wide range of commercial castings and decorative objects.

Słowa kluczowe

EN

Tekcast method; silicone mold; polymeric resins; casts

PL

metoda Tekcast; żywica polimerowa; odlewy

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2014
• Tom: Vol. 14, iss. 2
• Strony: 116--122
• Opis fizyczny: Bibliogr. 8 poz., rys., tab., wykr.

Twórcy

autor

Mäsiar H.

• Trenčianska univerzita Alexandra Dubčeka v Trenčíne, Pri parku 19, 911 06 Trenčín, Slovakia

autor

Repka L.

• Trenčianska univerzita Alexandra Dubčeka v Trenčíne, Pri parku 19, 911 06 Trenčín, Slovakia

autor

Lipták P.

• Trenčianska univerzita Alexandra Dubčeka v Trenčíne, Pri parku 19, 911 06 Trenčín, Slovakia

autor

Híreš O.

• Trenčianska univerzita Alexandra Dubčeka v Trenčíne, Pri parku 19, 911 06 Trenčín, Slovakia

Bibliografia

• [1] Corporate Office Supplies Tekcast Industries INC. (2005). New York. The world-leading Tekcast spin-casting system.
• [2] TEKCAST INDUSTRIES INC. Available on internet: http.//www.tekcast.com.
• [3] Centrifugal Casting saves money and time, Available on internet: <http://technik.ihned.cz/c4-10015280-11647800-800000_d-odstredive-liti-setri-cas-i-penize> [cit. 2010-03-17; 10:55 SEČ].
• [4] Teoli s.r.o., Žďár nad Sázavou. Available on internet: <http://www.teoli.eu> [cit. 2010-04-19; 13:45 SEČ].
• [5] Fabian, V., Bolibruchová, D. & Sládek, A. (2007). Zinc castings production by centrifugal casting. Slévarenství. 12.
• [6] Tekcast Industries INC., New York. Available on internet: <http://tekcast.com> [cit. 2010-04-28; 11:05 SEČ].
• [7] Corporate Office Supplies Tekcast Industries INC., New York. Spin casting from prototype through medium run components. (1998).
• [8] Beznák, M. (2006). Technologic process of precious casting production made of low melting point alloys by TekCast technology. Archiwum Odlewnictwa. 6.