PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Construction and Verification for Metrological Properties of the Prototype Magnetic Head for Nondestructive Testing of Lift Guide Rail Wear under Test Conditions

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The working surface of lift guide rails during operation is exposed to the destructive action of catchers under emergency braking conditions. In most cases, this surface is lubricated with grease, which makes it impossible to visually assess their local wear. The comfort of cabin movement on guide rails and thus the feelings of cabin occupants depend on the condition of guide rails. Therefore, the verification of lift guide rails wear under real conditions (in situ) is quite cumbersome. In order to assess them on a monthly basis, they would have to be completely cleaned and the excessively worn areas would have to be measured with universal measuring tools and re-lubricated. Such activities would only be a waste of time and lubricant.
Słowa kluczowe
Twórcy
  • Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, aleja Adama Mickiewicza 30, Kraków 30-059, Poland
autor
  • Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, aleja Adama Mickiewicza 30, Kraków 30-059, Poland
  • Institute of Technical Sciences and Aviation, The University College of Applied Sciences in Chełm, ul. Pocztowa 54, Chełm 22–100, Poland
  • Institute of Technical Sciences and Aviation, The University College of Applied Sciences in Chełm, ul. Pocztowa 54, Chełm 22–100, Poland
Bibliografia
  • 1. Ruta H., Krakowski T., Lonkwic P. Optimisation of the magnetic circuit of a measuring head for diagnostics of steel-polyurethane load-carrying belts using numerical methods. Sustainability. 2022; 14(5): 1–19.
  • 2. Lonkwic P., Krakowski T., Ruta H. Application of stray magnetic field for monitoring the wear degree in steel components of the lift guide rail system. Metals. 2020; 10(8): 1–19.
  • 3. Lonkwic P., Krakowski T., Ruta H. Assessment of the technical condition of lift guide rails using a magnetic field. VI International Conference of Computational Methods in Engineering Science (CMES 2021). Poland 2020, 9–10.
  • 4. Kozłowski T., Wodecki J., Zimróz R., Błażej R., Harygóra M. A Diagnostics of conveyor belt splices. Applied Sciences. 2020, 10(18).
  • 5. Malec M., Cieplak T., Walczuk S. Non-destructive tests of lock tongues used in ATR-72 aircraft landing gear based on magnetic method. Adv. Sci. Technol. Res. J. 2013; 7(20): 23–28. https://doi.org/10.5604/20804075.1073049
  • 6. Józwik J., Dziedzic K., Usydus I ., Ostrowski D., Korolczyk G. Assessment of internal defects of hardfacing coatings in regeneration of machine parts. J. Cent. South Univ. 2018, 25: 1144−1153.
  • 7. Sadowski Ł., Stefaniuk D., Różańska M., Usydus I., Szymanowski J. The eff ect of waste mineral powders on the structure of air voids in lowstrength air-entrained concrete floor screeds. Waste and Biomass Valorization. 2020; 11: 2211–2225.
  • 8. Pallarés F., Betti M., Bartoli G., Pa llarés L. Structural health monitoring (SHM) and nondestructive testing (NDT) of slender masonry structures: A practical review. Construction and Building Materials. 2021; 297
  • 9. Vasily V., Sukhorukov V. Steel Rope Diagnostics by Magnetic NDT: From Defect Detection to Automated Condition Monitoring. Materials Evaluation. 2021; 79(8).
  • 10. Peterka P., Krešák J., Vojtko M. Experience of the Crane Steel Wire Ropes Non-Destructive Tests. Adv. Sci. Technol. Res. J. 2018; 12(4): 157–163. https://doi.org/10.12913/22998624/100350
  • 11. Sreeraj P.R., Mishra S.K., Singh P.K. A review on non-destructive evaluation and characterization of additively manufactured components. Progress in Additive Manufacturing. 2021; 7(2): 225–248. https://doi.org/10.1007/s40964-021-00227-w
  • 12. h t t p : / / w w w. m o n t e f e r r o . i t / w p c o n t e n t /uploads/2020/05/Monteferro_Standard_Machined_Guide rails.pdf
  • 13. Zięba A. Physical Laboratory of the Department of Physics and Nuclear Technology of AGH University of Science and Technology, Part I. Pracownia Fizyczna Wydziału Fizyki i Techniki Jądrowej AGH, Część I. Wydanie trzecie zmienione. Publisher AGH Kraków, 2002.
  • 14. JCGM 100:2008 Évaluation des données de mesure – Guide rail pour l’expression de l’incertitude de mesure.
  • 15. Polish Standard PN EN 81.20, Safety Regulations Concerning the Structure and Installation of Lifts. Electric Lifts.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-5f67146c-e9e2-4fb1-8390-30cd1cfd9a8e
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.