Solderability of Alsi foams and AlSi + SiC composite foams and the joints properties

• Autorzy: Kawiak M. , Nowacki J.

Identyfikatory

DOI

10.2478/adms‐2014‐0007

• Języki publikacji: EN

Abstrakty

EN

The cellular structure and unique properties of aluminum foams are the reason of problems concerning their cutting and bonding. The content of the paper includes characterization of the essence of properties and application of aluminum foams, limitations and chances of aluminum foams soldering. The aim of the research is consideration of possibilities and problems of soldering AlSi foams and AlSi - SiC composite foams as well as mechanical properties. The possibility of soldering AlSi foams and AlSi - SiC composite foams using ZnAl solders was confirmed and higher tensile strength of the joint than the parent material was ascertained.

Słowa kluczowe

EN

AlSi foams; SiC composite foams; soldering; mechanical properties of soldered joint

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2014
• Tom: Vol. 14, nr 2(40)
• Strony: 24--36
• Opis fizyczny: Bibliogr. 12 poz., rys., tab.

Twórcy

autor

Kawiak M.

• West Pomeranian University of Technology, Institute of Materials Science and Engineering, Al. Piastow 19, 70 - 310 Szczecin, Poland

autor

Nowacki J.

• West Pomeranian University of Technology, Institute of Materials Science and Engineering, Al. Piastow 19, 70 - 310 Szczecin, Poland

Bibliografia

• 1. Banhart J.: Manufacture, characterisation and application of cellular metals and metal foams, Progress in Materials Science, 46 (2001), 559-632.
• 2. Stachowski A.: Porous materials - future use in structures, [in Polish], Kompozyty, 1 (2001), 224-227.
• 3. Degischer H.P., Kriszt B.: Handbook of cellular metals: production, processing, applications, 2002 Wiley- VCH Verlag GmbH & Co. KGaA ISBNs: 3-527-30339-1.
• 4. Dyga R.: Filling the flow parameters of the porous foamed steel, [in Polish], Inżynieria i Aparatura Chemiczna, 49, 2 (2010), 33-34.
• 5. Bernard, H. W. Bergmann, Ch. Haberling, H. Haldenwanger G.: Joining technologies for Alfoam- Al-Sheet Compound Structures, Advanced Engineering Materials No. 10, 4 (2002).
• 6. Ambroziak A., Lange A., Derlukiewicz W., Mosińska S.: Brazing of aluminium and its alloys, [in Polish], Przegląd Spawalnictwa, 2 (2009), 10-14.
• 7. Nowacki J., Grabian J., Krajewski S.: Problems brazing of aluminium foams, [in Polish], Przegląd Spawalnictwa, 1 (2014), 7-12.
• 8. Ashby M.F., Evans A.G., Fleck N.A., Gibson L. J., Hutchinson J. W. and Wadley H.N.G.: Metal Foams: A Design Guide, 2000.
• 9. Processing and Properties of Alulight®Aluminum Foams and Sandwich Panels for Shipboard Applications, National Shipbuilding Research Program, Panel on Product Development and Materials Technology, Biloxi, MS, 14 February 2008.
• 10. Sedliaková N., Simančík F., Kováčik J., Minár P.: Joining of Aluminium Foams Institute of Materials & Machine Mechanics SAS, Bratislava, Slovakia.
• 11. Simancik F., Rajner W. and Laag R.: Alulight - Aluminium foam for lightweight construction, SAE Technical Paper Series 2000-01-0337, Warrendale: SAE, Inc., (2000), 31-38.
• 12. Bernard T., Bergmann H. W., Haberling C., Haldenwanger H. G.: Joining technologies for Alfoam- Al-Sheet Compound Structures, Advanced Engineering Materials, No. 10, 4 (2002), 798-802.