Fabrication of composite polyurethane/hydroxyapatite scaffolds using solvent-casting salt leaching technique

• Autorzy: Wosek J.

Identyfikatory

DOI

10.1515/adms‐2015‐0003

• Języki publikacji: EN

Abstrakty

EN

Scaffolds are porous three-dimensional structures which are used to fill bone losses and make them possible to cells to grow. Many different structural and biological properties are required from them: porosity, mechanical strength and biocompability. The present research is aimed at development of composite polyurethane/hydroxyapatite scaffolds by using the solvent-casting salt leaching method. The SEM examinations were applied to assess the structure of obtained scaffolds.

Słowa kluczowe

EN

scaffolds; polyurethane scaffolds; hydroxyapatite scaffolds; solvent-casting; salt leaching

PL

rusztowania; poliuretan; hydroksyapatyt; odlewy rozpuszczalnikiem; ługowanie soli

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2015
• Tom: Vol. 15, nr 1(43)
• Strony: 14--20
• Opis fizyczny: Bibliogr. 16 poz., rys., tab.

Twórcy

autor

Wosek J.

• Gdansk University of Technology, Department of Materials Science and Welding Engineering, Narutowicza 11/12, 80-233 Gdańsk, Poland

Bibliografia

• 1. Kaźnica A., Joachimiak R., Drewa T., Rawo T., Deszczyński J.: New trends in tissue engineering [in Polish], Artroskopia i Chirurgia Stawów, 3 (2007), 11-16.
• 2. Bobe K., Willbold E., Morgenthal I., Andersen O.: Studnitzky T., Nellesen J., Tillmann W., Vogt C., Vano K. , Witte F., In vitro and in vivo evaluation of biodegradable, open-porous scaffolds made of sintered magnesium W4 short fibres, Acta Biomaterialia, 9 (2013), 8611-8623.
• 3. http://www.wisegeek.net/what-are-tissue-engineering-scaffolds.htm
• 4. http://www.karplab.net/papers/Karp_et_al___Scaffolds_for_Tissue_Engineering.pdf
• 5. X. Ma P.: Scaffolds for tissue fabrication, Materials Today, 2004, 30-40.
• 6. Liu C., Xia Z., Czernuszka J.T.: Design and development of three-dimensional scaffolds for tissue engineering, Review Paper, Chemical Engineering Research and Design, Institution of Chemical Engineers, vol. 85, no. A7 (2007), 1051-1064.
• 7. Ninp Z., Xiongbiao C.: Advances in Biomaterials Science and Biomedical Applications, Chapter 12: Biofabrication of Tissue Scaffolds”, ISBN 978-953-51-1051-4.
• 8. Zhou H., Lawrence J.G., Bhaduri S.B.: Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: A review, Acta Biomaterialia 8, (2012), 1999-2016.
• 9. X. Ma P., Elisseeff J.: Scaffolding in Tissue Engineering, Taylor & Francis Group, 2006, ch. 8, 111-125.
• 10. Kools W.F.C.: Membrane formation by phase inversion in multicomponent polymer systems, mechanisms and morphologies, University of Twente, 1998, ISBN 90 365 10961, 2, 3,
• 11. Kulbe K.C., Feng C.Y., Matsuura T.: Synthetic Polymeric Membranes, chapter 2: Synthetic Membranes for membrane processes, Springer 2008, ISBN 978-3-540-73994-4, 7, 8.
• 12. Asefnejad A., Khorasani M.T., Behnamghader A., Farsadzadeh B.: Manufacturing of biodegradable polyurethane scaffolds based on polycaprolactone using a phase separation method: physical properties and in vitro assay, International Journal of Nanomedicine, 2011, 2375-2384.
• 13. Yu L., Zhou L., Ding M., Li J., Tan H., Fu Q., He X.: Synthesis and characterization of novel biodegradable folate conjugated polyurethanes, Journal of Colloid and Interface Science, vol. 358 (2011), 376-383.
• 14. Yeganeh H., Lakouraj M.M., Jamashidi S.: Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(e-caprolactone) and poly(ethylene glycol), European Polymer Journal 41, (2005), 2370-2379.
• 15. Zanetta M., Quirici N., Demarosi F., Tanzi M.C., Rimondini L., Fare S.: Ability of polyurethane foams to support cell proliferation and the differentiation of MSCs into osteoblasts, Acta Biomaterialia 5 (2009), 1126-1136.
• 16. http://www.applichem.com/fileadmin/datenblaetter/A1584_pl_PL.pdf