Physical properties of masking coating systems used in military technology

• Autorzy: Michalski Marek , Radek Norbert

Identyfikatory

DOI

10.17402/643

• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of experimental tests on coating systems for military applications. The evaluation of properties is performed based on measurements of thickness, gloss, hardness, and surface roughness. The spectral characteristics of the tested systems and color parameters are presented. The tests are conducted for two-layer masking coating systems made in three variants: coating system (SP1), coating system modified with carbon nanotubes (SP2), and coating system modified with glass microspheres (SP3). Analysis of the obtained results reveals that these coating systems exhibit similar thickness, gloss, and spectral characteristics. The SP2 system is characterized by lower hardness, while the SP2 and SP3 systems have higher roughness.

Słowa kluczowe

EN

camouflage; coatings system; hardness; surface roughness; military equipment; military vehicles

• Wydawca: Wydawnictwo Naukowe Politechniki Morskiej w Szczecinie
• Czasopismo: Zeszyty Naukowe Politechniki Morskiej w Szczecinie
• Rocznik: 2025
• Tom: nr 82 (154)
• Strony: 69--79
• Opis fizyczny: Bibliogr. 41 poz., rys., tab.

Twórcy

autor

Michalski Marek

• Kielce University of Technology, Faculty of Mechatronics and Mechanical Engineering 7 1000-lecia P.P. Ave., 25-314 Kielce, Poland
• Firma Handlowa Barwa Jarosław Czajkowski 3-5 Warkocz St., 25-253 Kielce, Poland

• https://orcid.org/0000-0003-0419-7886

autor

Radek Norbert

• Kielce University of Technology, Faculty of Mechatronics and Mechanical Engineering 7 1000-lecia P.P. Ave., 25-314 Kielce, Poland

• https://orcid.org/0000-0002-1587-1074

Bibliografia

• 1. Åkerlind, C., Fagerström, J., Hallberg, T. & Kariis, H. (2015) Evaluation criteria for spectral design of camouflage. Proceedings SPIE 9653, Target and Background Signatures, 965303 (21 October 2015), doi: 10.1117/12.2194828.
• 2. Andersson, K.E. & Åkerlind, C. (2014) A review of materials for spectral design coatings in signature management applications. Proceedings SPIE 9253, Optics and Photonics for Counterterrorism, Crime Fighting, and Defence X; and Optical Materials and Biomaterials in Security and Defence Systems Technology XI, 92530Y, 31 October 2014, doi: 10.1117/12.2067167.
• 3. Auerbach, W. (1979) Leksykon wiedzy wojskowej. Warszawa: Ministerstwo Obrony Narodowej.
• 4. Czerwińska, K., Dwornicka, R. & Pacana, A. (2022) Improving the quality of castings used in light vehicles. Proceedings 31st International Conference on Metallurgy and Materials, 18‒19 May 2022, pp. 841‒847, doi: 10.37904/ metal.2022.4523.
• 5. Ditchburn, R.W. (1952) Light. Dover Publications.
• 6. Djokovic, J., Nikolic, R., Bujnak, J., Hadzima, B., Pastorek, F., Dwornicka, R. & Ulewicz, R. (2022) Selection of the optimal window type and orientation for the two cities in Serbia and one in Slovakia. Energies 15, 323, doi: 10.3390/en15010323.
• 7. Dudek, A., Lisiecka, B., Radek, N., Orman, L. & Pietraszek, J. (2022) Laser surface alloying of sintered stainless steel. Materials 15 (17), 6061, doi: 10.3390/ma15176061.
• 8. Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P. & Pobedza, J. (2017) The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model. Proceedings 26th International Conference on Metallurgy and Materials, 24‒26 May 2017, Brno Czech Republic, EU, pp. 1252‒1257.
• 9. Fairchild, M.D. (2013) Color Appearance Models. Wiley.
• 10. Francis, R.A. (2009) Through thick and thin: some observations on dry film thickness of paint coatings. Proceedings Corrosion & Prevention 2009, 15‒19 November 2009, Coffs Harbour, Australia, pp. 846‒856.
• 11. Gądek-Moszczak, A., Pietraszek, J., Jasiewicz, B., Sikorska, S. & Wojnar, L. (2015) The bootstrap approach to the comparison of two methods applied to the evaluation of the growth index in the analysis of the digital x-ray image of a bone regenerate. In: Camacho, D., Kim, S.W., Trawiński, B. (eds) New Trends in Computational Collective Intelligence. Studies in Computational Intelligence 572, pp. 127‒136, doi: 10.1007/978-3-319-10774-5_12.
• 12. Gilchrist, A. & Nobbs, J. (2000) Colorimetry, theory. In: Lindon, J., Holmes, J. & Tranter, G. (eds) Encyclopedia of Spectroscopy and Spectrometry, pp. 337‒343, Academic Press.
• 13. ISO1522 (2000) ISO 1522:2000 ‒ Paints and varnishes ‒ Determination of the hardness of coatings ‒ Pendulum hardness test. Geneva: ISO.
• 14. ISO21920-2 (2021) ISO 21920-2:2021 ‒ Geometrical product specifications (GPS) ‒ Surface texture: Profile ‒ Part 2: Terms, definitions and surface texture parameters. Geneva: ISO.
• 15. ISO2808 (2019) ISO 2808:2019 ‒ Paints and varnishes ‒ Determination of film thickness. Geneva: ISO.
• 16. ISO2813 (2019) ISO 2813:2019 ‒ Paints and varnishes ‒ Determination of gloss value. Geneva: ISO.
• 17. ISO4618 (2014) ISO 4618:2014 ‒ Paints and varnishes ‒ Terminology for paint and varnish materials and their applications. Geneva: ISO.
• 18. Kim, H., Choi, J., Kim, K.K., Won, P., Hong, S. & Ko, S.H. (2021) Biomimetic chameleon soft robot with artificial crypsis and disruptive coloration skin. Nature Communications 12 (1), 4658, doi: 10.1038/s41467-021-24916-w.
• 19. Kotnarowska, D. (2013) Destrukcja powłok polimerowych pod wpływem czynników eksploatacyjnych. Radom: Wydawnictwo UT-H.
• 20. Michalski, M., Pisarek, U., Radek, N., Przybył, W. & Szczepaniak, M. (2023) The influence of operational exposure on changes in parameters of effective camouflage of coatings used in military technology. Advances in Science and Technology ‒ Research Journal 17 (1), pp. 182–196, doi: 10.12913/22998624/156940.
• 21. MON (2008) NO-80-A200:2008 ‒ Powłoki malarskie. Wymagania i badania. Poland.
• 22. MON (2010) Maskowanie wojsk i wojskowej infrastruktury obronnej. DD/3.20. Warszawa: MON/SG WP.
• 23. Ohno, Y. (2000) CIE fundamentals for color measurements. Proceedings International Conference on Digital Printing Technologies 16, 16‒20 October 2000, Vancouver, CA.
• 24. Orman, L., Krawczyk, N., Radek, N., Honus, S., Pietraszek, J., Debska, L., Dudek, A., Kalinowski, A., Nocera, F. & Kurnitski, J. (2023) Comparative analysis of indoor environmental quality and self-reported productivity in intelligent and traditional buildings. Energies 16, 6663, doi: 10.3390/en16186663.
• 25. Orman, L., Radek, N., Pietraszek, J. & Szczepaniak, M. (2020) Analysis of enhanced pool boiling heat transfer on laser-textured surfaces. Energies 13, 2700, doi: 10.3390/ en13112700.
• 26. Orman, Ł., Majewski, G., Radek, N. & Pietraszek, J. (2022) Analysis of thermal comfort in intelligent and traditional buildings. Energies 15, 6522, doi: 10.3390/ en15186522.
• 27. Ozat, P.B., Tuncel, I. & Eroğlu, E. (2013) Repeatability and reliability of human eye in visual shade selection. Journal of Oral Rehabilitation 40 (12), pp. 958–964, doi: 10.1111/joor.12103.
• 28. Pacana, A., Siwiec, D. & Dwornicka, R. (2023) Pro-quality method improving industrial products toward sustainable development with criteria of circular economy. Proceedings 32nd International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, 17‒19 May 2023, pp. 697‒702, doi: 10.37904/metal.2023.4743.
• 29. Pietraszek, J. & Goroshko, A. (2014) The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome. Advanced Materials Research 874, pp. 145‒149, doi: 10.4028/www.scientific.net/AMR.874.145.
• 30. Radek, N. (2009) Determining the operational properties of steel beaters after electro spark deposition. Eksploatacja i Niezawodność ‒ Maintenance and Reliability 4 (44), pp. 10‒16.
• 31. Radek, N. (2023a) Properties of WC-Co coatings with Al2O3 addition. Production Engineering Archives 29 (1), pp. 94‒100.
• 32. Radek, N. (2023b) Powłoki do zastosowań w technice wojskowej ‒ technologie wytwarzania i właściwości. Kielce: Wydawnictwo Politechniki Świętokrzyskiej.
• 33. Radek, N., Michalski, M., Mazurczuk, R., Szczodrowska, B., Plebankiewicz, I. & Szczepaniak, M. (2023) Operational tests of coating systems in military technology applications. Eksploatacja i Niezawodność ‒ Maintenance and Reliability 25 (1), 12, doi: 10.17531/ein.2023.1.12.
• 34. Radek, N., Pietraszek, J., Gadek-Moszczak, A., Orman, L. & Szczotok, A. (2020) The morphology and mechanical properties of ESD Coatings before and after laser beam machining. Materials 13, 2331, doi: 10.3390/ma13102331.
• 35. Roorda, A. & Williams, D.R. (1999) The arrangement of the three cone classes in the living human eye. Nature 397 (6719), pp. 520–522.
• 36. Siwiec, D., Dwornicka, R. & Pacana, A. (2020) Improving the process of achieving required microstructure and mechanical properties of 38MnVS6 steel. Proceedings 29th International Conference on Metallurgy and Materials, 20‒22 May 2020, Brno, Czech Republic, EU, pp. 591‒596, doi: 10.37904/metal.2020.3525.
• 37. Siwiec, D., Pacana, A. & Gazda, A. (2023) A new QFD-CE method for considering the concept of sustainable development and circular economy. Energies 16, 2474, doi: 10.3390/en16052474
• 38. Skrzypczak-Pietraszek, E., Kwiecień, I., Gołdyn, A. & Pietraszek, J. (2017) HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture. Phytochemistry Letters 20, pp. 443‒448, doi: 10.1016/j.phytol.2017.01.009.
• 39. Spírková, M., Šlouf, M., Bláhová, O., Farkačová, T. & Benešová, J. (2006) Submicrometer characterization of surfaces of epoxy-based organic-inorganic nanocomposite coatings. A comparison of AFM study with currently used testing techniques. Journal of Applied Polymer Science 102 (6), pp. 5763–5774, doi: 10.1002/app.25218.
• 40. Talas, L., Baddeley, R.J. & Cuthill, I.C. (2017) Cultural evolution of military camouflage. Philosophical Transactions of the Royal Society B: Biological Sciences 372 (1724), doi: 10.1098/rstb.2016.0351.
• 41. Yalçin, R.A., Blandre, E., Joulain, K. & Drévillon, J. (2020) Colored radiative cooling coatings with nanoparticles. ACS Photonics 7 (5), pp. 1312–1322, doi: 10.1021/ acsphotonics.0c00513.