The Influence of the type of coating on the cutting tool wear during turning of 316L austenitic stainless steel

• Autorzy: Maruda R. W. , Szczotkarz N.

Identyfikatory

DOI

10.2478/amtm-2018-0008

• Języki publikacji: EN

Abstrakty

EN

The paper presents the influence of coatings applied with the use of PVD method on cutting tools on the wear of the tool and compares it with an uncoated P25 cemented carbide plate. During the experiment, two types of TiAlN coatings were used, applied in various proportions, as well as TiN coating. During the tests, the average width of the wear band on the flank face in B VBBzone and the width of KBcrater were monitored. Moreover, the scanning analysis of the tool was conducted in order to determine the intensity of adhesive wear. The lowest values of selected tool wear indicators were found out with the use of TiAlN coating applied in eight layers in the proportions 33/67% -TiN/TiAlN. The scanning analysis proved the highest adhesive wear of the uncoated P25 cemented carbide plate, as well as increased abrasive wear of the flank face and the formation of a crater in comparison with coated plates.

Słowa kluczowe

EN

dry cutting; tool wear; 316L austenitic steel; SEM; TiN and TiAlN coatings

PL

cięcie na sucho; zużycie narzędzi; stal austenityczna 316L; SEM; powłoki TiN i TiAlN

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Archives of Mechanical Technology and Materials
• Rocznik: 2018
• Tom: Vol. 38
• Strony: 45--49
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Maruda R. W.

• University of Zielona Gora, 4 Prof. Z. Szafrana Street, 65-516 Zielona Gora, Poland

autor

Szczotkarz N.

• University of Zielona Gora, 4 Prof. Z. Szafrana Street, 65-516 Zielona Gora, Poland

Bibliografia

• [1] Pusavec F., Kramar D., Krajnik P., Kopac J., Transitioning to sustainable production - Part II: Evaluation of sustainable machining technologies, J Clean Prod, 18, 12 (2010) 1211-1221.
• [2] Biermann D., Iovkov I., Modelling, simulation and compensation of thermal effects for complex machining processes, Prod Eng, 9, 4 (2015) 433-435.
• [3] Zębala W., Kowalczyk R., Estimating the effect of cutting data on surface roughness and cutting force during WC-Co turning with PCD tool using Taguchi design and ANOVA analysis, Int J Adv Manuf Technol, 77, 9-12 (2015) 2241-2256.
• [4] Liu J., Ma C., Tu G., Long Y., Cutting performance and wear mechanism of Sialon ceramic cutting inserts with TiCN coating, Surf Coatings Technol, 307 (2016) 146-150.
• [5] Tu G., Wu S., Liu J., Long Y., Wang B., Cutting performance and wear mechanisms of Sialon ceramic cutting tools at high speed dry turning of gray cast iron, Int J Refract Met Hard Mater, 54 (2016) 330-334.
• [6] Kupczyk M., Jozwiak K., Cieszkowski P, Libuda P., Influence of laser heating on adhesion of CVD coatings to cutting edges, Surf Coatings Technol, 201, 9-11 (2007) 5153-5156.
• [7] Mikołajczyk T., Nowicki K., Kłodowski A., PimenovD.Yu., Neural network approach for automatic image analysis of cutting edge wear, Mech Syst Signal Process, 88 (2017) 100-110.
• [8] Mikołajczyk T., Nowicki K., Bustillo A., Pimenov D. Yu., Predicting tool life in turning operations using neural networks and image processing, Mech Syst Signal Process, 104 (2018) 503-513.
• [9] Jackson M.J., Morrell J.S., Machining with Nanomaterials. Springer Science & Business Media,2009.
• [10] Grzesik W., Podstawy Skrawania Materialow Metalowych. Wydawnictwo Naukowo - Techniczne, Warszawa, 1998.
• [11] Munz W.D., Smith I.J., Donohue L.A., Deeming A.P., Godwin R., TiAlN based PVD coatings tailored for dry cutting operations, in Proceedings, Annual Technical Conference - Society of Vacuum Coaters (Society of Vacuum Coaters) Albuquerque, (1997) 83-93.
• [12] Kupczyk M.J., Cutting edges with high hardness made of nanocrystalline cemented carbides, Int J Refract Met Hard Mater, 49, 1 (2015) 249-255.
• [13] Kupczyk M.J., Komolka J., High durability of cutting insert edges made of nanocrystalline cemented carbides, Int J Refract Met Hard Mater, 49, 1 (2015) 225-231.
• [14] Kümmel J., Braun D., Gibmeier J., Schneider J., Greiner C., Schulze V., Wanner A., Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation, J Mater Process Technol, 215 (2015) 62-70.
• [15] Deeming A.P., Munz W.D., Smith I.J., Dry high performance machining (HPM) ofdie and moulds using PVD coated solid cemented carbide tools. Paper presented at the meeting of Sheffield PVD Research Group, 2001.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).