Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The present theoretical analysis is to investigate the effect of non-Newtonian lubricant modelled by a Rabinowitsch fluid on the performance of a curvilinear squeeze film bearing with one porous wall. The equations of motion of a Rabinowitsch fluid are used to derive the Reynolds equation. After general considerations on the flow in a bearing clearance and in a porous layer using the Morgan-Cameron approximation the modified Reynolds equation is obtained. The analytical solution of this equation for the case of a squeeze film bearing is presented. As a result one obtains the formulae expressing pressure distribution and load-carrying capacity. Thrust radial bearing and spherical bearing with a squeeze film are considered as numerical examples.
Rocznik
Tom
Strony
427--441
Opis fizyczny
Bibliogr. 28 poz., rys.
Twórcy
autor
- University of Zielona Góra, Faculty of Mechanical Engineering ul. Szafrana 2, 65-516 Zielona Góra, POLAND
autor
- University of Zielona Góra, Faculty of Mechanical Engineering ul. Szafrana 2, 65-516 Zielona Góra, POLAND
autor
- University of Zielona Góra, Faculty of Mechanical Engineering ul. Szafrana 2, 65-516 Zielona Góra, POLAND
autor
- University of Zielona Góra, Faculty of Mechanical Engineering ul. Szafrana 2, 65-516 Zielona Góra, POLAND
Bibliografia
- [1] Wu H. (1978): A review of porous squeeze films. – Wear, vol.47, pp.371-385.
- [2] Kraemer E.O. and Williamson R.V. (1929): Internal friction and the structure of „solvated” colloids. – J. Rheology, vol.1, No.1, pp.76-92.
- [3] Rabinowitsch B. (1929): Über die Viskosität und Elastizität von Solen (On the viscosity and elasticity of sols). – Zeit. Phys. Chem., A145, pp.1-26.
- [4] Rotem Z. and Shinnar R. (1961): Non-Newtonian flow between parallel boundaries in linear movements. – Chem. Eng. Sci., vol.15, pp.130-143.
- [5] Wada S. and Hayashi H. (1971): Hydrodynamic lubrication of journal bearings by pseudo-plastic lubricants. – (Pt 1, Theoretical studies), Bull. JSME, vol.14, No.69, pp.268-278.
- [6] Wada S. and Hayashi H. (1971): Hydrodynamic lubrication of journal bearings by pseudo-plastic lubricants. – (Pt 2, Experimental studies), Bull. JSME, vol.14, No.69, pp.279-286.
- [7] Swamy S.T.N., Prabhu B.S. and Rao B.V.A. (1975): Stiffness and damping characteristics of finite width journal bearing with a non-Newtonian film and their application to instability prediction. – Wear, vol.32, pp.379-390.
- [8] Rajalingham C., Rao B.V.A. and Prabu S. (1978): The effect of a non-Newtonian lubricant on piston ring lubrication. – Wear, vol.50, pp.47-57.
- [9] Sharma S.C., Jain S.C. and Sah P.L. (2000): Effect of non-Newtonian behaviour of lubricant and bearing flexibility on the performance of slot-entry journal bearing. – Tribology Int., vol.33, pp.507-517.
- [10] Singh U.P., Gupta R.S. and Kapur V.K. (2011): On the steady performance of hydrostatic thrust bearing: Rabinowitsch fluid model. – Tribology Transactions, vol.54, pp.723-729.
- [11] Hashimoto H. and Wada S. (1986): The effects of fluid inertia forces in parallel circular squeeze film Bering lubricated with pseudoplastic fluids. – J. Tribology, vol.108, pp.282-287.
- [12] Lin J.-R. (2012): Non-Newtonian squeeze film characteristics between annular disks: Rabinowitsch fluid model. – Tribology Int., vol.52, pp.190-194.
- [13] Lin J.-R., Chu L.-M., Hung C.-R., Lu R.-F. and Lin M.-C. (2013): Effects of non-Newtonian rheology on curved circular squeeze film: Rabinowitsch fluid model. – Z. Naturforsch., vol.68a, pp.291-299.
- [14] Walicka A., Walicki E. and Ratajczak M. (1999): Pressure distribution in a curvilinear thrust bearing with pseudo-plastic lubricant. – Appl. Mech. Enging., vol.4 (sp. Issue), pp.81-88.
- [15] Walicka A., Walicki E. and Ratajczak M. (2000): Rotational inertia effects in a pseudo-plastic fluid flow between non-coaxial surfaces of revolution. – Proc. 4th Minsk Int. Heat Mass Transfer Forum (May 22-27, 2000 Minsk Belarus), pp.19-29.
- [16] Ratajczak M., Walicka A. and Walicki E. (2006): Inertia effects in the curvilinear thrust bearing lubricated by a pseudo-plastic fluid of Rotem-Shinnar. – Problems of Machines Expoitation, vol.44, pp.159-170.
- [17] Walicka A. and Walicki E. (2010): Performance of the curvilinear thrust bearing lubricated by a pseudo-plastic fluid of Rotem-Shinnar. – Int. J. Appl. Mech. Enging, vol.15, pp.895-907.
- [18] Morgan V.T. and Cameron A. (1957): Mechanisms of lubrication in porous metal bearings. – Proc. Conf. On Lubrication and Wear, Inst. Mech. Eng., London, pp.151-157.
- [19] Gupta R.S. and Kapur V.K. (1979): Centrifugal effects in hydrostatic porous thrust bearings. – J. Lubric. Technology, vol.101, pp.381-392.
- [20] Prakash J. and Vij S.K. (1974): Analysis of narrow porous journal bearing using Beaver-Joseph criterion of velocity slip. – J. Appl. Mech., vol.41, pp.348-354.
- [21] Uma S. (1974): The analysis of double layered porous slider bearing. – Wear, vol.42, pp.205-215.
- [22] Walicka A. (2012): Porous curvilinear squeeze film bearing with rough surfaces lubricated by a power-law fluid. – Journal of Porous Media, vol.15, No.1, pp.29-49.
- [23] Walicka A. (2013): Pressure distribution in a squeeze film of a Shulman fluid between porous surfaces of revolution. – Int. J. Engng Sci., vol.69, pp.33-48.
- [24] Walicka A. and Jurczak P. (2013): Pressure distribution in a porous squeeze film bearing lubricated by a Vočadlo fluid. – Appl. Mathematical Modelling, vol.37, No.22, pp.9295-9307.
- [25] Walicka A. (2002): Rotational Flows of Rheologically Complex Fluids in Thin Channels (in Russian). – Zielona Gora: University Press.
- [26] Walicki E. (2005): Rheodynamics of Slide Bearings Lubrication (in Polish). – Zielona Gora: University Press.
- [27] Wada S., Nishiyama N. and Nishida S. (1985): Modified Darcy’s law for non-Newtonian fluid. – Bulletin JSME, vol.28, pp.3031-3037.
- [28] Rajalingham C., Rao B.V.A. and Prabu B.S. (1979): Steady state performance of a hydrodynamic journal Bering with a pseudo-plastic lubricant. – J. Lubric. Technol., vol.101, pp.497-502.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-5e49a0ab-384d-4406-8465-15483c0debc1