Comparative Analysis of the Endurance of UV-Cured Adhesive Joints

• Autorzy: Ogrodniczek Jacek

Identyfikatory

DOI

10.35784/jteme.3056

• Języki publikacji: EN

Abstrakty

EN

The aim of the study was to compare the strength of adhesive joints bonded with two different UV-cured adhesives in different exposure times. The adhesives used in the research differed in viscosity. The first adhesive Multibond 5550 was characterised by low viscosity, the second adhesive Multibond 5544 was characterised by high viscosity. The adhesive joints were made from a 316L steel sample and a sample made from polymethyl methacrylate. The adhesive joints were cured at three time intervals: 5 minutes, 10 minutes and 20 minutes. The strength of the adhesive bonds was compared using the MANOVA test. Statistical analysis showed that there was a statistical difference between the adhesives cured for 10 minutes. It was also found that joints where a high viscosity adhesive was used showed similar strength results for 10 and 20 minutes of adhesive exposure to UV rays. Statistical analysis was performed using RStudio software and the R programming language.

Słowa kluczowe

EN

adhesive joints; UV-curing; adhesion; statistical analysis

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Wydawnictwo Politechniki Lubelskiej
• Czasopismo: Journal of Technology and Exploitation in Mechanical Engineering
• Rocznik: 2022
• Tom: Vol. 8, nr 1
• Strony: 26--31
• Opis fizyczny: Bibliogr. 11 poz., fig., tab.

Twórcy

autor

Ogrodniczek Jacek

• University of Life Sciences in Lublin (Poland)

• https://orcid.org/0000-0002-6484-2245

Bibliografia

• [1] D.Halliday,R.ResnickandJ.Walker,Fundamentals of Physics 4, PWN,2003.
• [2] Z. Shen, Y. Wu, H.Deng, R. HouandY. Zhu, “UV-thermal dual-cured polymers with degradable and anti-bacterial function”, Progress in Organic Coatings, vol. 148, 2020.
• [3] B. Goss,“Bonding glass and other substrates with UV curing adhesives”, International Journal of Adesion & Adhesives, vol22, issue 5, pp. 405-408, 2002.
• [4] https://www.multibond.pl/multibond-5544_klej_akrylowy_UV.htm[Accessed: 10-Sep-2022]
• [5] https://www.multibond.pl/multibond-5550_klej_akrylowy_UV.htm[Accessed: 10-Sep-2022]
• [6] https://www.ebmia.pl/wiedza/porady/obrobka-porady/stal-316l-1-4404/[Accessed:10-Sep-2022]
• [7] A. Rudawska, Surface preparation for bonding selected construction materials.PolitechnikaLubelska, 2017.
• [8] J. Ogrodniczek,A.Pydaand, M. Kłonica,“The use of CAD programs for designing special instrumentation in adhesive technologies”, Journal of Technology and Exploitation in Mechanical Engineering, Vol. 4, no. 1, 2018.
• [9] PN-EN 1465:2009 –Adhesives –Determination of Tensile Lap-Shear Strength of Bonded Assemblies
• [10] S. Stanisz, An accessible statistics course using STATISTICA PL on examples in medicine -Volume 2. Linear and non-linear models. StatSoft Polska, 2007.
• [11] M. Rabej, Statistical analysis with Statistica and Excel. Wydawnictwo Helion, 2018.