PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Moisture Effects in Heat Transfer Through Clothing Systems for Wildland Firefighters

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Wildland firefighters work in unfavourable environments involving both heat and moisture. Moisture in clothing systems worn by wildland firefighters may increase or decrease heat transfer, depending on its source and location in the clothing system, location on the body, timing of application and degree of sorption. In this experiment, 4 outerwear/underwear combinations were exposed to 1 of 5 different conditions varying on amount and location of moisture. The fabric systems were then exposed to either a high-heat-flux flame exposure (83 kW/m2) or a low-heat-flux radiant exposure (10 kW/m2). Under high-heat-flux flame exposures, external moisture tended to decrease heat transfer through the fabric systems, while internal moisture tended to increase heat transfer. Under low-heat-flux radiant exposures, internal moisture decreased heat transfer through the fabric systems. The nature and extent of such differences was fabric dependent. Implications for test protocol development are discussed.
Rocznik
Strony
227--238
Opis fizyczny
Bibliogr. 18 poz., rys., tab.
Twórcy
autor
  • Departments of Human Ecology and Mechanical Engineering, University of Alberta, Edmonton, Alta., Canada
autor
  • Departments of Human Ecology and Mechanical Engineering, University of Alberta, Edmonton, Alta., Canada
  • Departments of Human Ecology and Mechanical Engineering, University of Alberta, Edmonton, Alta., Canada
autor
  • Departments of Human Ecology and Mechanical Engineering, University of Alberta, Edmonton, Alta., Canada
Bibliografia
  • 1. Stull JO. The effect of moisture on firefighter protective clothing thermal insulation: a review of industry research. In: Nelson C, Henry N, editors. Performance of Protective Clothing: Issues and Priorities for the 21st Century, Seventh Volume (ASTM STP 1386). West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM); 2000. p. 557-76.
  • 2. Mäkinen H, Smolander J, Vuorinen H. Simulation of the effect of moisture content in underwear and on the skin surface on steam burns of fire fighters. In: Mansdorf SZ, Sager R, Nielsen AP, editors. Performance of Protective Clothing: Issues and Priorities for the 21st Century, Second Symposium (ASTM STP 989). Philadelphia, PA, USA: American Society for Testing and Materials (ASTM); 1988. p. 415-21.
  • 3. Farnworth B. A numerical model of the combined diffusion of heat and water vapour through clothing. Text Res J 1986;56:653-65.
  • 4. Gibson PW. Factors influencing steady-state heat and water transfer measurements for clothing materials. Text Res J 1993;63:749-64.
  • 5. Parsons KC. Heat transfer through human body and clothing systems. In: Raheel M, editor. Protective clothing systems and materials. New York, NY, USA: Decker; 1994. p. 137-71.
  • 6. Weder MS, Zimmerli T, Rossi RM. A sweating and moving arm for the measurement of thermal insulation and water vapour resistance of clothing. In: Johnson JS, Mansdorf SZ, editors. Performance of Protective Clothing: Issues and Priorities for the 21st Century, Fifth Volume (ASTM STP 1237). West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM); 1996. p. 257-68.
  • 7. Yoo H, Hu YS, Kim EA. Effects of heat and moisture transport in fabrics and garments determined with a vertical plate sweating skin model. Text Res J 2000;70:542-9.
  • 8. Chen NY. Transient heat and moisture transfer through thermally irradiated cloth [dissertation]. Cambridge, MA, USA: MIT; 1959. Retrieved October 14, 2001 from http://theses.mit.edu:80/Dienst/UI/2.0/Describe/0018.mit.theses/1959-2
  • 9. Lee YM, Barker RL. Effect of moisture on the thermal protective performance of heat-resistant fabrics. Journal of Fire Sciences 1986;4:315-31.
  • 10. Rossi RM, Zimmerli T. Influence of humidity on the radiant, convective, and contact heat transmission through protective clothing materials. In: Johnson JS, Mansdorf SZ, editors. Performance of Protective Clothing: Issues and Priorities for the 21st Century, Fifth Volume (ASTM STP 1237). West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM) 1996. p. 269-80.
  • 11. Stull JO. Comparative thermal insulative performance of reinforced knee areas of firefighter protective clothing. In: Nelson C, Henry N, editors. Performance of Protective Clothing: Issues and Priorities for the 21st Century, Seventh Volume (ASTM STP 1386). West Conshohocken, PA, USA: American Society for Testing and Materials (ASTM); 2000. p. 312-28.
  • 12. Torvi DA, Dale JD. Effects of variations in thermal properties on the performance of flame resistant fabrics for flash fires. Text Res J 1998;68:787-96.
  • 13. Veghte J. Effect of moisture on the burn potential in fire fighter’s gloves. Fire Technol 1987;23:313-22.
  • 14. Canadian General Standards Board (CGSB). Conditioning textile materials for testing (National Standard of Canada CAN/CGSB-4.2, No. 2-M88). Ottawa, Ont., Canada: CGSB; 1993.
  • 15. American Society for Testing and Materials (ASTM). Standard test method for felts (Standard No. ASTM D-461). Annual book for ASTM standards. Vol. 07.01. Philadelphia, PA, USA: ASTM; 1999.
  • 16. Canadian General Standards Board (CGSB). Thermal protective performance of materials for clothing (National Standard of Canada CAN/CGSB-4.2 No. 78.1-2001). Ottawa, Ont., Canada: CGSB; 2001.
  • 17. National Fire Protection Association (NFPA). NFPA 1977 standard on protective clothing and equipment for wildland fire fighting. Quincy, MA, USA: NFPA; 1998.
  • 18. Lawson L. Effects of moisture on heat transfer through thermal protective fabric systems [Master of Science thesis]. Edmonton, Alta, Canada: University of Alberta; 2002.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-5dffe2a2-137f-49cf-9d75-1c32ea40e882
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.