Influence of the slipe effect on simply supported composite beam

• Autorzy: Pytlowany T.
• Języki publikacji: EN

Abstrakty

EN

The work concerns the slip effect which may occur in simply supported composite beams. The occurrence of the slip effect may lead to additional increase in beam deflection. The main reason for the increase is susceptibility of the anchor bolts that join the beam. The analysis of the slip effect occurrence is based on the following criteria: steel and concrete are linearly elastic, junction goes along the whole length of the considered beam, concrete slab and steel rib move by the same value along the whole length of the beam, simply supported beams are analysed. In order to present the slip effect in composite beams and its results, a numerical example is used. The example shows three kinds of the load capacity of anchor bolts as well as their impact on the slip effect and deflection of steel-concrete composite beams.

Słowa kluczowe

EN

slip effect; composite beams; simply supported beam

• Wydawca: Foundation for Young Scientists
• Czasopismo: Challenges of Modern Technology
• Rocznik: 2012
• Tom: Vol. 3, no. 2
• Strony: 44--49
• Opis fizyczny: Bibliogr. 12 poz., tab., rys., wykr.

Twórcy

autor

Pytlowany T.

• Krosno State College

Bibliografia

• [1] Nie, J., J. Fan, and C.S. Cai. “Stiffness and Deflection of Steel-Concrete Composite Beams under Negative Bending”. J. Struct. Eng. 130, 1842 (2004).
• [2] Johnson, R.P. Composite Structures of Steel and Concrete. Vol. 1: Beams, Slabs, Columns, and Frames for Buildings. Blackwell Scientifi c Publications 1994.
• [3] Nie, J. and C.S. Cai. “Steel-Concrete Composite Beams Considering Shear Slip Eff ects”. Journal of Structural Engineering 129 (4), 2003.
• [4] PN-EN 1993-1-1 Eurokod 3: Projektowanie konstrukcji stalowych. Part 1-1: Reguły ogólne i reguły dla budynków [in Polish].
• [5] pr EN 1994-1-1 FINAL DRAFT: Design of Composite Steel and Concrete Structures. Part 1.1: General Rules and Rules for Buildings, January 2004.
• [6] PN-B-03300 Konstrukcje zespolone stalowo-betonowe. Obliczenia statyczne i projektowanie [in Polish].
• [7] Kucharczuk, W. and S Labocha. Konstrukcje zespolone stalowo-betonowe budynków. Warszawa: Arkady, 2007 [in Polish].
• [8] Jasim, N.A. The effect of partial interaction on behaviour of composite beams. Ph.D. thesis submitted to University of Basrah, Iraq, 1994: 201.
• [9] Jasim, N.A, and A.A. Mohamad Ali. „Deflections of composite beams with partial shear connection”. The Structural Engineer 75(4), 1997: 58–61.
• [10] Adrjan, P., W. Lorenc, and E Kubica, Zagadnienie sztywności giętnej dźwigarów zespolonych z częściowym zespoleniem o różnej intensywności. 2004 [in Polish].
• [11] Johnson, R.P, and I.M. May. “Partial interaction design of composite beams.” The Structural Engineer 53(8), 1975: 305–311.
• [12] British Standards Institution. Draft Standard for the use of structural steel in buildings. Part 3: Composite construction. London: British Standards Institution, 1976: 147.