Electrophoretic Deposition and Characterisation of Chitosan Coatings on Near-Β Titanium Alloy

• Autorzy: Jugowiec D. , Kot M. , Moskalewicz T.

Identyfikatory

DOI

10.1515/amm-2016-0112

• Języki publikacji: EN

Abstrakty

EN

In this study, chitosan coatings were electrophoretically deposited (EPD) on near-β Ti-13Nb-13Zr alloy. The influence of colloidal solution composition and EPD parameters on the quality of chitosan coatings was investigated. It was established that the uniformity of as-deposited chitosan coatings is highly dependent on the chemical composition of the solution used for EPD, the pH, electrophoretic mobility and zeta potential of chitosan colloidal molecules, as well as EPD parameters, such as potential difference value and deposition time. The microstructure of the coatings was investigated using electron microscopy and X-ray diffractometry. The coatings 350 nm thick were homogeneous and exhibited an amorphous structure. The coatings had low hardness and Young’s modulus. The effect of surface of the substrate preparation prior to coating deposition on the adhesion of chitosan coatings to the Ti-13Nb-13Zr alloy was also investigated. The coatings exhibited good adhesion to the non-acid-etched surface of the titanium alloy.

Słowa kluczowe

EN

chitosan; Ti13Nb13Zr alloy; electrophoretic deposition; coating

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 657--664
• Opis fizyczny: Bibliogr. 35 poz., rys.

Twórcy

autor

Jugowiec D.

• AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, 66 Czarnowiejska Str., 30-054 Kraków, Poland

autor

Kot M.

• AGH Universit y of Science and Technology, Faculty of Mechanical Engineering and Robotics, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Moskalewicz T.

• AGH Universit y of Science and Technology, Faculty of Mechanical Engineering and Robotics, Al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] O. Floręncio, P. S. Silva Jr., R. Ribeiro, J.M. Chaves, F. H. Sá, F. X. Melo, S. G. Schneider, Mater. Sci. Eng. A 521-522, 351-353 (2009).
• [2] E. B. Taddei, V. A.R. Henriques, C.R.M. Silva, C.A.A. Cairo, Mater. Sci. Eng. C 24, 683-687 (2004).
• [3] M. Sowa, M. Piotrowska, M. Widziołek, G. Dercz, G. Tylko, T. Gorewoda, A.M. Osyczka, W. Simka, Mater. Sci. Eng. C 49, 159-173 (2015).
• [4] P. Majumdar, S. B. Singh, S. Dhara, M. Chakraborty, Mater. Sci. Eng. C 46, 62-68 (2015).
• [5] L. Mohan, C. Anandan, Appl. Surf. Sci. 282, 281-290 (2013).
• [6] A. Zieliński, P. Antoniuk, K. Krzysztofowicz, Surf. Eng. 30, 643-649 (2014).
• [7] S.J. Wu, H. Li, S.Y. Wu, Q. Guo, B. Guo, Surf. Eng. 30, 693-696 (2014).
• [8] W. Simka, R. P. Soch, G. Dercz, J. Michalska, A. Maciej, A. Krząkała, Appl. Surf. Sci. 279, 317-323 (2013).
• [9] C. A. R. P. Baptista, S. G. Schneider, E. B. Taddei, H.M. da Silva, Int. J. Fatique 26, 967-973 (2004).
• [10] F. Ordikhani, A. Simchi, Appl. Surf. Sci. 317, 56-66 (2014).
• [11] X. Liu, P.K. Chu, C. Ding, Mater. Sci. Eng. R 47, 49-121 (2004).
• [12] M. T. Mohammed, Z. A. Khan, A. N. Siddiquee, Procedia Mater. Sci. 6, 1610-1618 (2014).
• [13] A. Simchi, F. Pishbin , A.R. Boccaccini, Mater. Lett. 63, 2253-2256 (2009).
• [14] Y. Li, X. Pang, R.F. Epand, I. Zhitomirsky, Mater. Lett. 65, 1463-1465 (2011).
• [15] Y. Cheng, K. M. Gray, L. David, I. Royaud, G. F. Payne and G. W. Rubloff, Mater. Lett. 87, 97-100 (2012).
• [16] F. Ding, Z. Nie, H. Deng, L. Xiao, Y. Du, X. Shi, Carbohydr. Polym. 98, 1547-1552 (2013).
• [17] X. Pang, T. Casagrande, I. Zhitomirsky, J. Colloid Interface Sci. 330, 323-329 (2009).
• [18] X. Cheng, K. Ma, R. Li, X. Ren, T. S. Huang, Appl. Surf. Sci. 309, 138-143 (2014).
• [19] M. Z. Elsabee , E. S. Abdou, Mater. Sci. Eng. C 33, 1819-1841 (2013).
• [20] G. Ruhi, O.P. Modi, S.K. Dhawan, Synth. Met. 200, 24-39 (2015).
• [21] S. Bautista-Baños, A.N. Hernández-Lauzardo, M.G. Velázquez-del Valle, M. Hernández-López, E. Ait Barka, E. Bosquez-Molina, C.L. Wilson, Crop Prot. 25, 108-118 (2006).
• [22] F. Pishbin, V. Mourińo, J.B. Gilchrist, D.W. McComb, S. Kreppel, V. Salih, M. P. Ryan, A. R. Boccaccini, Acta Biomater. 9, 7469-7479 (2013).
• [23] J. Lou, K. Yu, G. Wei, C. Xin, Y. Qin, L. Jiang, H. Ge, H. Dettinger, Surf. Eng. 29, 637-641 (2013).
• [24] Y. Wang, M. Kang, S.W. Jin, X .Q. Fu , X. S. Wang, Surf. Eng. 30, 557-561 (2014).
• [25] Z. Wang, X. Zhang, J. Gu, H. Yang, J. Nie , G. Ma, Carbohydr. Polym. 103, 38-45 (2014).
• [26] I. Corni, M. P. Ryan and A. R. Boccaccini, J. Eur. Ceram. Soc. 28, 1353-1367 (2008).
• [27] Z. Zhang, X. Wu, C. Jiang , N. Ma, Surf. Eng. 30, 21-25 (2014).
• [28] F. Gebhardt, S. Seuss, M.C. Turhan, H. Hornberger, S. Virtanen, A. R. Boccaccini, Mater. Lett. 66, 302-304 (2012).
• [29] I. Zhitomirsky ,d A. Hashambhoy, J. Mater. Process. Technol. 191, 68-72 (2007).
• [30] B. Łosiewicz, G. Dercz, M. Szklarska, W. Simka, M. Łężniak, A. Krząkała , A. Swinarew, Solid State Phenom. 203-204, 212-215 (2013).
• [31] L. Altomare, L. Draghi, R. Chiesa, L. De Nardo, Mater. Lett. 78, 18-21 (2012).
• [32] T. Moskalewicz, M. Kot, S. Seuss, A. Kędzierska, A. Czyrska- Filemonowicz, A. Boccaccini, Met. Mater. Int. 21, 96-103 (2015).
• [33] J. Zhang, Z. Wen, M. Zhao, G. Li , C. Dai, Mater. Sci. Eng. C 58, 992-1000 (2016).
• [34] X. Pang and I. Zhitomirsky, Mater. Charact. 58, 339-348 (2007).
• [35] S. Mahmoodi, L. Sorkhi, M. Farrokhi-Rad, T. Shahrabi, Surf. Coat. Technol. 216, 106-114 (2013).