Preparation of molecularly imprinted polymer for chiral recognition of racemic 1,1′-binaphthalene-2,2′-diamine by HPLC

• Autorzy: Dong H. , Wang Y. , Ou Y. , She J. , Shen X. , Li J. , Zhang Ch. , Liu L.
• Języki publikacji: EN

Abstrakty

EN

Molecularly imprinted polymers (MIPs) were synthesized by imprinting a new template—S(-)-1,1′-binaphthalene-2,2′-diamine (S-DABN) and applied as chiral stationary phases for chiral separation of DABN racemates by high-performance liquid chromatography (HPLC). The influence of some key factors on the chiral recognition ability of MIPs, such as the type of functional monomers and porogen and the molar ratio of template to monomer, was systematically investigated. The chromatographic conditions, such as mobile phase composition, sample loading, and flow rate, were also measured. The chiral separation for DABN racemates under the optimum chromatographic conditions by using MIP chiral stationary phase (CSP) of P3, prepared with the S-DABN/MAA ratio = 1/4 and used acetonitrile (2 mL) and chloroform (4 mL) as porogen, showed the highest separation factor (2.14). Frontal analysis was used to evaluate affinity to the target molecule of MIPs. The binding sites (Bt) of MIPs and dissociation constant (Kd) were estimated as 4.56 μmol g−1 and 1.40 mmol L−1, respectively. In comparison with the previous studies, this approach had the advantages, such as the higher separation factor, easy preparation, and cost-effectiveness, it not only has the value for research but also has a potential in industrial application.

Słowa kluczowe

EN

1,1′-binaphthalene-2, 2′-diamine; chiral recognition; HPLC; molecularly imprinted polymers

• Wydawca: University of Silesia in Katowice ; Akademiai Kiado
• Czasopismo: Acta Chromatographica
• Rocznik: 2014
• Tom: Vol. 26, no. 4
• Strony: 683--693
• Opis fizyczny: Bibliogr. 24 poz., rys., tab.

Twórcy

autor

Dong H.

• Harbin Engineering University Polymer Materials Research Center, Key Laboratory of Superlight Materials and Surface Technology Ministry of Education. College of Material Science and Chemical Engineering Harbin 150001 China

autor

Wang Y.

• Harbin Engineering University Polymer Materials Research Center, Key Laboratory of Superlight Materials and Surface Technology Ministry of Education. College of Material Science and Chemical Engineering Harbin 150001 China

autor

Ou Y.

• Harbin Engineering University Polymer Materials Research Center, Key Laboratory of Superlight Materials and Surface Technology Ministry of Education. College of Material Science and Chemical Engineering Harbin 150001 China

autor

She J.

• Harbin Engineering University Polymer Materials Research Center, Key Laboratory of Superlight Materials and Surface Technology Ministry of Education. College of Material Science and Chemical Engineering Harbin 150001 China

autor

Shen X.

• Harbin Engineering University Polymer Materials Research Center, Key Laboratory of Superlight Materials and Surface Technology Ministry of Education. College of Material Science and Chemical Engineering Harbin 150001 China

autor

Li J.

• Harbin Engineering University Polymer Materials Research Center, Key Laboratory of Superlight Materials and Surface Technology Ministry of Education. College of Material Science and Chemical Engineering Harbin 150001 China

autor

Zhang Ch.

• Harbin Engineering University Polymer Materials Research Center, Key Laboratory of Superlight Materials and Surface Technology Ministry of Education. College of Material Science and Chemical Engineering Harbin 150001 China

autor

Liu L.

• Harbin Engineering University Polymer Materials Research Center, Key Laboratory of Superlight Materials and Surface Technology Ministry of Education. College of Material Science and Chemical Engineering Harbin 150001 China

Bibliografia

• [1] C.J. Wang, Z.P. Xu, X. Wang, and H.L. Teng, Tetrahedron, 66, 3702 (2010)
• [2] I. Sakakura, K. Suzuki, K. Nakano, and K. Ishihara, Adv. Synth. Catal., 348, 2457 (2006)
• [3] R.K. Rao, A.B. Naidu, E. A. Jaseer, and G. Sekar, Tetrahedron, 65, 4619 (2009)
• [4] G. Guillena, M.C. Hita, C. Najera, and S.F. Viozquez, J. Org. Chem., 73, 5933 (2008)
• [5] A. Sakakura, K. Suzuki, K. Nakano, and K. Ishihara, Org. Lett., 8, 2229 (2006)
• [6] K. Mikami, K. Aikawa, and Y. Yusa, J. Org. Chem., 4, 95 (2002)
• [7] K. Mikami, H. Kakuno, and K. Aikawa, Angew. Chem., 117, 7423 (2005)
• [8] H. Nishi, K. Nakamura, H. Nakai, and T. Sato, J. Chromatogr., A, 757, 225 (1997)
• [9] L.I. Monser, G.M. Greenway, and D.F. Ewing, J. Tetrahedron: Asymmetry, 7, 1189 (1996)
• [10] K. Mosbach, Trends Biochem. Sci., 19, 9 (1994)
• [11] G., Wulff, Angew. Chem. Int. Ed., 34, 1812 (1995)
• [12] T.W. Tan (Ed) Handbook of Molecular Imprinting Technique and Application, Beijing, 2010, p. 12
• [13] M. Kempe and K. Mosbach, Tetrahedron Lett., 36, 3563 (1995)
• [14] M. Kempe and K., Mosbach, J. Chromatogr., A, 694, 3 (1995)
• [15] L.I. Andersons and K., Mosbach, J. Chromatogr. A, 516, 313 (1990)
• [16] K. Mosbach and O. Ramström, Nat. Biotechnol., 14, 163 (1996)
• [17] Ch.-Y. Hung and Ch.-Ch. Hwang, Acta Chromatogr., 18, 106 (2007)
• [18] A. Dobashi, S. Nishida, K. Kurata, and M. Hamada, Anal. Sci., 18, 35 (2002)
• [19] O. Liseca, P. Hugob, and A. Seidel-Morgenstern, J. Chromatogr., A, 908, 19 (2001)
• [20] H. Li, L. Nie, and S. Yao, Chromatographia, 60, 425 (2004)
• [21] J. O’Mahony, A. Molinelli, K. Nolan, M. R. Smyth, and B. Mizaikoff, Biosens. Bioecetron., 20, 1884 (2005)
• [22] H.S. Andersson, J.G. Karisson, S.A. Piletsky, A.-C. Koch-Schmidt, K. Mosbach, and I.A. Nicholls, J. Chromatogr., A, 848, 39 (1999)
• [23] J. Yin, G. Yang, and Y. Chen, J. Chromatogr., A, 1090, 68 (2005)
• [24] J. Ou, L. Kong, C. Pan, X. Su, X. Lei, and H. Zou, J. Chromatogr., A, 1117, 163 (2006)